Agilent Technologies 355 SCD Manuel utilisateur

Agilent Technologies

Agilent 355 SCD and 255 NCD

Quick Reference Guide

Detector Startup

Complete Startup (from total shut down)

1Turn on the detector and establish carrier gas flow.

2Turn on the vacuum pump with the toggle button located on the front panel

of the Detector.

3Turn the instrument from Standby to On, and allow the system to evacuate

for approximately 1 minute.

4Turn on the air to the ozone generator and set the regulator inside the front

door of the Detector to between 3 and 6 psig.

5Turn on the ozone generator.

6Turn on the Interface Controller with the toggle on the back panel of the

box.

Daily Startup (from daily shutdown)

1Turn the instrument from Standby to On, and allow the system to evacuate

for approximately 1 minute.

2Turn on the air to the ozone generator and set the regulator inside the front

door of the Detector to between 3 and 6 psig.

3Turn on the ozone generator.

Detector Shutdown

Daily Shutdown (Standby Mode)

1Turn off the ozone generator with the button on the front of the Detector.

2Turn down the oxidant flow to 0 with the regulator located in the front door

of the Detector.

3Turn the Detector power to Standby.

It is recommended to leave the vacuum pump and Dual Plasma Controller

operating at all times.

2Quick Reference Guide

Agilent 355 SCD and 255 NCD

Complete Shutdown (long periods of time)

1Turn off the ozone generator with the button on the front of the Detector.

2Turn down the air flow to 0 with the regulator located in the front door of

the Detector.

3Turn the Detector power to Standby.

4Turn off the power switch on the Controller and allow at least 15 minutes

for the burner to cool.

5Turn off the vacuum pump.

6Turn off the Detector gases.

Table 1 Typical Operating Conditions

*Oil-free pump

Table 2 Maintenance Schedule

*Operating life is based on the total time logged during operation of the 355 SCD with the burner and ozone

generator on.

Condition SCD NCD

Detector Pressure (Torr) 4-8 (6-12*) 4-10

Dual Plasma Controller Pressure (Torr) 300-400 100-250

Burner Temperature (°C) 800 900-950

Hydrogen Flow Rate (sccm) 40-50 4-6

Oxidant Flow Rate (sccm) 60-65 (air) 8-12 (oxygen)

Background Noise (mV) 0.3-2.0 0.3-1.0

Component/Material Operating Life*

Pump Oil ~3 month

Oil Coalescing Filter ~3 months

Chemical Trap ~3 months

Agilent 355 SCD and 255 NCD

Quick Reference Guide 3

Agilent Technologies

©Agilent Technologies, Inc. 2007

Printed in USA

First edition, March 2007

Agilent Technologies, Inc.

2850 Centerville Road

Wilmington, DE 19808-1610 USA

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Agilent Technologies Capteur de sécurité

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuel utilisateur

Agilent Technologies

Agilent Technologies G3437A Manuel utilisateur

Agilent Technologies

Agilent Technologies 85037A Manuel de service

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1260 Infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 8355 Sulfur Manuel utilisateur

Agilent Technologies

Agilent Technologies 6820 GC Manuel utilisateur

Agilent Technologies

Agilent Technologies 5975 Series Manuel

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies G3485A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8355 Sulfur Manuel utilisateur

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies InfinityLab 1290 Infinity II Manuel utilisateur

Agilent Technologies

Agilent Technologies NPD Manuel utilisateur

Agilent Technologies

Agilent Technologies G1314B VWD Manuel utilisateur

Agilent Technologies

Agilent Technologies G3440-68011 Manuel utilisateur

Agilent Technologies

Agilent Technologies 5973N Mode d'emploi

Agilent Technologies

Agilent Technologies G1315B Manuel utilisateur

Agilent Technologies

Agilent Technologies 85025A Manuel

Agilent Technologies

Agilent Technologies 1260 Infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies G3388B Manuel d'installation

Agilent Technologies

Agilent Technologies 1200 Infinity Series Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur