Agilent Technologies 8752C Manuel utilisateur

Service Guide

Agilent Technologies

8752C

Network Analyzer

Manufacturing Part Number: 08752-90136

Printed in USA

Print Date: February 1998

Supersedes: December 1997

Hewlett-Packard to Agilent Technologies Transition

This manual may contain references to HP or Hewlett-Packard. Please note that

Hewlett-Packard's former test and measurement, semiconductor products and chemical analysis

businesses are now part of Agilent Technologies. To reduce potential confusion, the only

change to product numbers and names has been in the company name prefix: where a product

number/name was HP XXXX the current name/number is now Agilent XXXX. For example,

model number HP 8752C is now model number Agilent 8752C.

Documentation Warranty

THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FUR-

THER, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AGILENT

DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD TO

THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT

NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE. AGILENT SHALL NOT BE LIABLE FOR

ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION

WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY

INFORMATION CONTAINED HEREIN. SHOULD AGILENT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS COVERING THE

MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE WAR-

RANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.

DFARS/Restricted Rights Notice

If software is for use in the performance of a U.S. Government prime contract or

subcontract, Software is delivered and licensed as “Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995), or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer software” as defined in FAR 52.227-19 (June 1987) or

any equivalent agency regulation or contract clause. Use, duplication or disclosure of

Software is subject to Agilent Technologies’ standard commercial license terms, and

non-DOD Departments and Agencies of the U.S. Government will receive no greater than

Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users

will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or

DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.

Printing Copies of Documentation from the Web

To print copies of documentation from the Web, download the PDF file from the Agilent

web site:

•Gotohttp://www.agilent.com.

• Enter the document’s part number (located on the title page) in the Quick Search box.

• Click GO.

• Click on the hyperlink for the document.

• Click the printer icon located in the tool bar.

Contacting Agilent

This information supersedes all prior HP contact information.

Online assistance: www.agilent.com/find/assist

Americas

Brazil

(tel) (+55) 11 3351 7012

(fax) (+55) 11 3351 7024

Canada

(tel) +1 877 894 4414

(fax) +1 303 662 3369

Mexico

(tel) 1 800 254 2440

(fax) 1 800 254 4222

United States

(tel) 800 829 4444

(alt) (+1) 303 662 3998

(fax) 800 829 4433

Asia Pacific and Japan

Australia

(tel) 1 800 225 574

(fax) 1 800 681 776

(fax) 1 800 225 539

China

(tel) 800 810 0508

(alt) 800 810 0510

(fax) 800 810 0507

(fax) 800 810 0362

Hong Kong

(tel) 800 933 229

(fax) 800 900 701

India

(tel) 1600 112 626

(fax) 1600 112 727

(fax) 1600 113 040

Japan (Bench)

(tel) 0120 32 0119

(alt) (+81) 426 56 7799

(fax) 0120 01 2144

Japan (On-Site)

(tel) 0120 802 363

(alt) (+81) 426 56 7498

(fax) (+81) 426 60 8953

Singapore

(tel) 1 800 275 0880

(fax) (+65) 6755 1235

(fax) (+65) 6755 1214

South Korea

(tel) 080 778 0011

(fax) 080 778 0013

Taiwan

(tel) 0800 047 669

(fax) 0800 047 667

(fax) 886 3492 0779

Thailand

(tel) 1 800 2758 5822

(alt) (+66) 2267 5913

(fax) 1 800 656 336

Malaysia

(tel) 1800 880 399

(fax) 1800 801 054

Europe

Austria

(tel) 0820 87 44 11*

(fax) 0820 87 44 22

Belgium

(tel) (+32) (0)2 404 9340

(alt) (+32) (0)2 404 9000

(fax) (+32) (0)2 404 9395

Denmark

(tel) (+45) 7013 1515

(alt) (+45) 7013 7313

(fax) (+45) 7013 1555

Finland

(tel) (+358) 10 855 2100

(fax) (+358) (0) 10 855 2923

France

(tel) 0825 010 700*

(alt) (+33) (0)1 6453 5623

(fax) 0825 010 701*

Germany

(tel) 01805 24 6333*

(alt) 01805 24 6330*

(fax) 01805 24 6336*

Ireland

(tel) (+353) (0)1 890 924 204

(alt) (+353) (0)1 890 924 206

(fax)(+353) (0)1 890 924 024

Israel

(tel) (+972) 3 9288 500

(fax) (+972) 3 9288 501

Italy

(tel) (+39) (0)2 9260 8484

(fax) (+39) (0)2 9544 1175

Luxemburg

(tel) (+32) (0)2 404 9340

(alt) (+32) (0)2 404 9000

(fax) (+32) (0)2 404 9395

Netherlands

(tel) (+31) (0)20 547 2111

(alt) (+31) (0)20 547 2000

(fax) (+31) (0)20 547 2190

Russia

(tel) (+7) 095 797 3963

(alt) (+7) 095 797 3900

(fax) (+7) 095 797 3901

Spain

(tel) (+34) 91 631 3300

(alt) (+34) 91 631 3000

(fax) (+34) 91 631 3301

Sweden

(tel) 0200 88 22 55*

(alt) (+46) (0)8 5064 8686

(fax) 020 120 2266*

Switzerland (French)

(tel) 0800 80 5353 opt. 2*

(alt) (+33) (0)1 6453 5623

(fax) (+41) (0)22 567 5313

Switzerland (German)

(tel) 0800 80 5353 opt. 1*

(alt) (+49) (0)7031 464 6333

(fax) (+41) (0)1 272 7373

Switzerland (Italian)

(tel) 0800 80 5353 opt. 3*

(alt) (+39) (0)2 9260 8484

(fax) (+41) (0)22 567 5314

United Kingdom

(tel) (+44) (0)7004 666666

(alt) (+44) (0)7004 123123

(fax) (+44) (0)7004 444555

(tel) = primary telephone number; (alt) = alternate telephone number; (fax) = FAX number; * = in country number

11/16/04

Service Guide

HP 8752C Network Analyzer

ABCDE

HP Part No. 08752-90136 Supersedes December 1997

Printed in USA February 1998

Notice.

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including but not limited to, the implied warranties of merchantability and

tness for a particular purpose. Hewlett-Packard shall not be liable for errors

contained herein or for incidental or consequential damages in connection with

the furnishing, performance, or use of this material.



Contents

1. Service Equipment and Analyzer Options

Table of Service Test Equipment ................ 1-1

Principles of Microwave Connector Care ............ 1-5

Analyzer Options Available . . . . . . . . . . . . . . . . . . . 1-7

Option 003, 3 GHz Operation . . . . . . . . . . . . . . . . . 1-7

Option 004, Step Attenuator ................. 1-7

Option 006, 6 GHz Operation . . . . . . . . . . . . . . . . . 1-7

Option 010, Time Domain ...... .. .. .. .. .. .. 1-7

Option 075, 75 Impedance . . . . . . . . . . . . . . . . . . 1-7

Option 1CM, Rack Mount Flange Kit Without Handles .... . 1-7

Option 1CP, Rack Mount Flange Kit With Handles ....... 1-8

Option AFN, add 50 Test Port Cable ............. 1-8

Option AFP, add 75 Test Port Cable .. .. .. .. .. .. . 1-8

Option B02, External Disk Drive .... .. .. .. .. .. . 1-8

Service and Support Options .................. 1-9

2. System Verication and Performance Tests

How to Test the Performance of Your Analyzer .... .. .. . 2-1

Sections in this Chapter .................... 2-2

HP 8752C System Verication . . . . . . . . . . . . . . . . . . 2-3

Equipment ......................... 2-3

Description .... .. .. .. .. .. .. .. .. .. .. . 2-3

System Verication Cycle and Kit Recertication . . . . . . . . 2-4

Measurement Uncertainty ...... .. .. .. .. .. .. 2-4

Measurement Uncertainty Window .............. 2-4

HP 8752C Type-N Test Port Characteristics (50 System) .... 2-6

Directivity ........................ 2-6

Source Match (Reection) ...... .. .. .. .. .. . 2-6

Source Match (Transmission)* ............... 2-6

Reection Tracking .................... 2-6

Load Match ........................ 2-7

Transmission Tracking . . . . . . . . . . . . . . . . . . . 2-7

Contents-1

HP 8752C Type-N Test Port Characteristics (75 System) .... 2-7

Directivity ........................ 2-7

Source Match (Reection) ................. 2-7

Source Match (Transmission)* .. .. .. .. .. .. .. . 2-8

Reection Tracking .. .. .. .. .. .. .. .. .. .. 2-8

Load Match ........................ 2-8

Transmission Tracking .... .. .. .. .. .. .. .. . 2-8

System Verication Procedure .. .. .. .. .. .. .. . .. 2-9

In case of diculty ..................... 2-10

HP 8752C Performance Tests . . . . . . . . . . . . . . . . . . 2-11

Equipment Required to Run the Performance Tests ...... 2-12

1. Reection Test Port Output Frequency Range and Accuracy .. 2-13

Specications ........................ 2-13

Equipment .... .. .. .. .. .. .. .. .. .. .. . 2-13

Description ......................... 2-13

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

In case of diculty ..................... 2-14

2. Reection Test Port Output Power Range and Level Linearity

(For HP 8752C Analyzers without Option 004) ........ 2-15

Specications ........................ 2-15

Equipment .... .. .. .. .. .. .. .. .. .. .. . 2-15

Description ......................... 2-15

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Power Range and Level Linearity for an HP 8752C or an HP

8752C Option 075 ................... 2-16

Power Range and Level Linearity for an HP 8752C with Option

003 .......................... 2-17

Power Range and Level Linearity for an HP 8752C with Options

003 and 075 .. .. .. .. .. .. .. .. .. .. .. 2-18

Power Range and Level Linearity for an HP 8752C with Option

006 .......................... 2-18

In case of diculty ...... .. .. .. .. .. .. .. 2-18

3. Reection Test Port Output Power Range and Level Linearity (HP

8752C with Option 004) . . . . . . . . . . . . . . . . . . . 2-19

Specications ........................ 2-19

Equipment .... .. .. .. .. .. .. .. .. .. .. . 2-19

Description ......................... 2-19

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Power Range for an HP 8752C with Option 004 ....... 2-20

Power Level Linearity for an HP 8752C with Option 004

or an HP 8752C withOptions 004 and 075 ........ 2-21

Contents-2

Power Level Linearity for an HP 8752C with Options 003 and

004 .... .. .. .. .. .. .. .. .. .. .. .. 2-22

Power Level Linearity for an HP 8752C with Options 004 and

006 .... .. .. .. .. .. .. .. .. .. .. .. 2-23

Power Level Linearity for an HP 8752C with Options 003, 004,

and 075 .. .. .. .. .. .. .. .. .. .. . .. . 2-23

In case of diculty .................... 2-23

4. Transmission Test Port Input Noise Floor Level (HP 8752C

without Option 075) .. .. .. .. .. .. .. .. .. .. 2-24

Specications ........................ 2-24

Equipment ......................... 2-24

Description .... .. .. .. .. .. .. .. .. .. .. . 2-24

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Noise Floor Level at 300 kHz to 1.3 GHz (Standard Option), 300

kHz to 3 GHz (Option 003), or 300 kHz to 6 GHz (Option

006) with an IF BW of 3 kHz .. .. .. .. .. . .. . 2-24

Noise Floor Level at 300 kHz to 1.3 GHz (Standard Option) or

300 kHz to 3 GHz (Option 003) with an IF BW of 10 Hz . . 2-26

Noise Floor Level at 3 GHz to 6 GHz (Option 006) with an IF

BWof10Hz .... .. .. .. .. .. .. .. .. .. 2-27

Noise Floor Level at 3 GHz to 6 GHz (Option 006) with IF BW of

3 kHz ......................... 2-28

In case of diculty .................... 2-28

5. Transmission Test Port Input Noise Floor Level

(HP 8752C with Option 075) . . . . . . . . . . . . . . . . . 2-29

Specications ........................ 2-29

Equipment ......................... 2-29

Description .... .. .. .. .. .. .. .. .. .. .. . 2-29

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29

Noise Floor Level at 300 kHz to 1.3 GHz (Option 075) or 300

kHz to3 GHz (Options 075 and 003) with an IF BW of 3 kHz 2-29

Noise Floor Level at 300 kHz to 1.3 GHz (Option 075) or 300

kHz to3 GHz (Options 075 and 003) with an IF BW of 10 Hz 2-31

In case of diculty .................... 2-31

6. Test Port Crosstalk .. .. .. .. .. .. .. .. .. .. . 2-32

Specications ........................ 2-32

Equipment ......................... 2-32

Description .... .. .. .. .. .. .. .. .. .. .. . 2-32

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33

Test Port Crosstalk for a Standard HP 8752C or an HP 8752C

with Option 003 .................... 2-33

Contents-3

Test Port Crosstalk for an HP 8752C with Option 006 . . . . . 2-33

Test Port Crosstalk for an HP 8752C with Option 075 . . . . . 2-34

Test Port Crosstalk for an HP 8752C with Options 003 and 075 2-34

In case of diculty ...... .. .. .. .. .. .. .. 2-35

7. System Trace Noise . . . . . . . . . . . . . . . . . . . . . 2-36

Specications ........................ 2-36

Equipment .... .. .. .. .. .. .. .. .. .. .. . 2-36

Description ......................... 2-36

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37

Reection Trace Noise (Magnitude) ............. 2-37

Reection Trace Noise (Phase) .... .. .. .. .. .. . 2-38

Transmission Trace Noise (Magnitude) . . . . . . . . . . . . 2-38

Transmission Trace Noise (Phase) . . . . . . . . . . . . . . 2-39

In case of diculty ...... .. .. .. .. .. .. .. 2-39

8. Magnitude Dynamic Accuracy (HP 8752C - All Options) .... 2-40

Specications ........................ 2-40

Equipment .... .. .. .. .. .. .. .. .. .. .. . 2-40

Description ......................... 2-41

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41

In case of diculty ...... .. .. .. .. .. .. .. 2-44

9. Phase Dynamic Accuracy (HP 8752C - All Options) ...... 2-45

Specications ........................ 2-45

Equipment .... .. .. .. .. .. .. .. .. .. .. . 2-45

Description ......................... 2-45

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46

10. Compression . . . . . . . . . . . . . . . . . . . . . . . . 2-47

Specications ........................ 2-47

Equipment .... .. .. .. .. .. .. .. .. .. .. . 2-47

Description ......................... 2-47

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48

In case of diculty ...... .. .. .. .. .. .. .. 2-49

Performance Test Record . . . . . . . . . . . . . . . . . . . . 2-50

3. Adjustments and Correction Constants

When to Perform the Adjustment Procedures .......... 3-1

Keep Correction Constants Current to Save Time .... .. . 3-1

Adjustment Procedure Error Messages .... .. .. .. .. 3-1

Perform Adjustments in This Order .. .. .. .. .. .. .. . 3-2

Test Equipment Specications ................ 3-3

Analyzer Cover Removal . . . . . . . . . . . . . . . . . . . 3-4

1. A9 CC Jumper Position Procedure .............. 3-5

Contents-4

Table des matières

Autres manuels Agilent Technologies Instrument de mesure

Agilent Technologies

Agilent Technologies 89410A Manuel utilisateur

Agilent Technologies

Agilent Technologies E8364-60102 Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies 4288A Manuel du propriétaire

Agilent Technologies

Agilent Technologies E4402B Option H3B Manuel

Agilent Technologies

Agilent Technologies 85024A Manuel

Agilent Technologies

Agilent Technologies X Series Manuel utilisateur

Agilent Technologies

Agilent Technologies U1701B Manuel

Agilent Technologies

Agilent Technologies VARIAN Dual Manuel utilisateur

Agilent Technologies

Agilent Technologies Acqiris U10 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 16800 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies PSA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies OmniBER OTN Series Manuel utilisateur

Agilent Technologies

Agilent Technologies N1913a Manuel utilisateur

Agilent Technologies

Agilent Technologies 8453 Manuel utilisateur

Agilent Technologies

Agilent Technologies 5977B Series Manuel utilisateur

Agilent Technologies

Agilent Technologies Agilent 4396B Manuel utilisateur

Agilent Technologies

Agilent Technologies 86121A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8719ET Manuel utilisateur

Agilent Technologies

Agilent Technologies X Series Guide de l'utilisateur

Agilent Technologies

Agilent Technologies ENA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies N1911A Mode d'emploi

Agilent Technologies

Agilent Technologies 8510XF Manuel de service

Agilent Technologies

Agilent Technologies ADM series Manuel utilisateur

Agilent Technologies

Agilent Technologies EPM-P Series Manuel d'utilisation et d'entretien

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur