Agilent Technologies 8510C Manuel utilisateur

User’s Guide

Agilent Technologies

8510C Network Analyzer Introductory

This manual provides documentation for the 8510C Network Analyzers.

Manufacturing Part Number: 08510-90290

Printed in USA

February 1994

Notice

The information contained in this document is subject to change

without notice.

Agilent Technologies makes no warranty of any kind with regard to this

material, including but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. Agilent

Technologies shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the furnishing,

performance, or use of this material.

Safety Information

The following safety symbols are used throughout this manual.

Familiarize yourself with the symbols and their meaning before

operating this instrument.

WARNING Warning denotes a hazard. It calls attention to a procedure

which, if not correctly performed or adhered to, could result in

injury or loss of life. Do not proceed beyond a warning note

until the indicated conditions are fully understood and met.

CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not

correctly performed or adhered to, could result in damage to or

destruction of the instrument. Do not proceed beyond a caution sign

until the indicated conditions are fully understood and met.

NOTE Note calls out special information for the user’s attention. It provides

operational information or additional instructions of which the user

should be aware.

The instruction documentation symbol. The product is

marked with this symbol when it is necessary for the

user to refer to the instructions in the documentation.

This symbol is used to mark the on position of the

power line switch.

This symbol is used to mark the standby position of the

power line switch.

This symbol indicates that the input power required is

AC.

iii

WARNING This is a Safety Class 1 Product (provided with a protective

earth ground incorporated in the power cord). The mains plug

shall be inserted only in a socket outlet provided with a

protected earth contact. Any interruption of the protective

conductor inside or outside of the product is likely to make the

product dangerous. Intentional interruption is prohibited.

WARNING No operator serviceable parts inside. Refer servicing to

qualified personnel. To prevent electrical shock do not remove

covers.

WARNING If this product is not used as specified, the protection provided

by the equipment could be impaired. This product must be used

in a normal condition (in which all means for protection are

intact) only.

CAUTION Always use the three-prong AC power cord supplied with this product.

Failure to ensure adequate grounding may cause product damage.

Warranty

This Agilent Technologies instrument product is warranted against

defects in material and workmanship for a period of three years from

date of shipment. During the warranty period, Agilent Technologies

will, at its option, either repair or replace products which prove to be

defective.

For warranty service or repair, this product must be returned to a

service facility designated by Agilent Technologies. Buyer shall prepay

shipping charges to Agilent Technologies and Agilent Technologies shall

pay shipping charges to return the product to Buyer. However, Buyer

shall pay all shipping charges, duties, and taxes for products returned

to Agilent Technologies from another country.

Agilent Technologies warrants that its software and firmware

designated by Agilent Technologies for use with an instrument will

execute its programming instructions when properly installed on that

instrument. Agilent Technologies does not warrant that the operation of

the instrument, or software, or firmware will be uninterrupted or

error-free.

LIMITATION OF WARRANTY

The foregoing warranty shall not apply to defects resulting from

improper or inadequate maintenance by Buyer, Buyer-supplied

software or interfacing, unauthorized modification or misuse, operation

outside of the environmental specifications for the product, or improper

site preparation or maintenance.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. AGILENT

TECHNOLOGIES SPECIFICALLY DISCLAIMS THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

EXCLUSIVE REMEDIES

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND

EXCLUSIVE REMEDIES. AGILENT TECHNOLOGIES SHALL NOT

BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON

CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.

Printed in USA March 2000

Notice

Hewlett-Packard to Agilent Technologies Transition

This documentation supports a product that previously shipped under the Hewlett-

Packard company brand name. The brand name has now been changed to Agilent

Technologies. The two products are functionally identical, only our name has changed. The

document still includes references to Hewlett-Packard products, some of which have been

transitioned to Agilent Technologies.

Autres manuels pour 8510C

Table des matières

Autres manuels Agilent Technologies Instrument de mesure

Agilent Technologies

Agilent Technologies 490 Micro GC Manuel utilisateur

Agilent Technologies

Agilent Technologies Agilent 4396B Manuel utilisateur

Agilent Technologies

Agilent Technologies 8752C Manuel utilisateur

Agilent Technologies

Agilent Technologies 86038B Manuel utilisateur

Agilent Technologies

Agilent Technologies E1420B Manuel utilisateur

Agilent Technologies

Agilent Technologies 8719ET Manuel

Agilent Technologies

Agilent Technologies 1670G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1660C Series Manuel utilisateur

Agilent Technologies

Agilent Technologies FieldFox N9912A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8753ES Manuel utilisateur

Agilent Technologies

Agilent Technologies PSA Series Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies E4980A Manuel utilisateur

Agilent Technologies

Agilent Technologies E4404B Guide de démarrage rapide

Agilent Technologies

Agilent Technologies E4406A VSA Series Manuel

Agilent Technologies

Agilent Technologies ESA-E E4402B Manuel utilisateur

Agilent Technologies

Agilent Technologies 8510C Manuel du propriétaire

Agilent Technologies

Agilent Technologies ESA-E Series Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies BioTek Epoch Manuel utilisateur

Agilent Technologies

Agilent Technologies E5500A Manuel utilisateur

Agilent Technologies

Agilent Technologies E4991A Manuel utilisateur

Agilent Technologies

Agilent Technologies E4402B Option H3B Manuel

Agilent Technologies

Agilent Technologies N9010AK-REA Manuel utilisateur

Agilent Technologies

Agilent Technologies FieldFox N9913A Manuel utilisateur

Agilent Technologies

Agilent Technologies 86038A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur