Agilent Technologies 7250 Manuel utilisateur

Agilent Technologies

Agilent

7250 Accurate-Mass

Quadrupole

Time-of-Flight GC/MS

System

Concepts Guide

2 Agilent 7250 Q-TOF GC/MS Concepts Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

G7250-90003

Edition

First Edition, July 2017

Printed in USA

Agilent Technologies, Inc.

5301 Stevens Creek Blvd.

Santa Clara, CA 95051

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).Safety

Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

Microsoft® and Windows® are U.S. regis-

tered trademark s of Microsoft Corporation.

Software Revision

This guide applies to the Agilent Mass-

Hunter Workstation Software -- Data Acqui-

sition for 7250 Quadrupole Time-of-Flight

program version B.03.00 or higher until

superseded.

Agilent 7250 Q-TOF GC/MS Concepts Guide 3

In This Guide...

The Concepts Guide presents “The Big Picture” behind the

operation of the Agilent 7250 Accurate-Mass Quadrupole

Time-of-Flight GC/MS System by helping you understand how

the hardware and software work.

1 Overview

Learn how the 7250 Q-TOF GC/MS helps you do your job.

2 Theory and Inner Workings

Learn the concepts you need to understand how the 7250

Q-TOF works.

3 Agilent 7250 Accurate-Mass Q-TOF and Performance

Learn how the 7250 Q-TOF exceeds performance measures.

4 Agilent 7250 Q-TOF GC/MS Concepts Guide

Agilent 7250 Q-TOF GC/MS Concepts Guide 5

Contents

1 Overview

System Description 8

Q-TOF applications 9

Instrument control software 10

Data analysis software 12

Reference Documentation 14

2 Theory and Inner Workings

The 7250 Q-TOF Mass Spectrometer 16

Sample Ionization Technology 18

Electrion Impact Ionization 18

LE-EI Ion Source 18

Quadrupole Collision Cell MS/MS Technology 22

Quadrupole filtration 22

Quad mass filter 24

Ion fragmention and collision cell technology 26

Collision cell 26

Time-of-Flight MS Operation 30

Proprietary INVAR flight tube 31

Detector 32

Pumping system 34

3 Agilent 7250 Accurate-Mass Q-TOF Performance

How the 7250 Q-TOF Meets Performance Measures 36

Resolving Power 36

Mass Accuracy 36

Scan Speed 36

Sensitivity 37

Dynamic Range 37

6 Agilent 7250 Q-TOF GC/MS Concepts Guide

7250 Accurate-Mass Q-TOF Design 38

Agilent Technologies

Agilent 7250 Accurate-Mass Quadrupole Time-of-Flight GC/MS System

Concepts Guide

Overview

System Description 8

Q-TOF applications 9

Instrument control software 10

Data analysis software 12

This chapter provides an overview of the Agilent 7250

Accurate-Mass Quadrupole Time-of-Flight (Q-TOF) GC/MS

system, its applications, and its data analysis system.

8 Agilent 7250 Q-TOF GC/MS Concepts Guide

1 Overview

System Description

The Agilent 7250 Accurate-Mass Quadrupole Time-of-Flight

(Q-TOF) GC/MS is a stand-alone quadrupole time-of-flight mass

spectrometer for use with the Agilent 7890 Gas Chromatograph.

The 7250 Q-TOF features:

•A new independently MS-heated high efficiency, Low Energy

Electron Impact (LE-EI) ion source capable of operating in

standard (70 eV) or low energy (9 eV to 30 eV) modes

•Both 70 eV and 15 eV tune parameters are stored in the same

tune file allowing use of both modes in different time

segments for the same sample run

•Automated fast venting, that uses nitrogen to break vacuum

thereby reducing the influx of air into the analyzer, resulting

in lower stabilization times after pump down

•Independently MS-heated hyperbolic quadrupole mass filter,

which can be heated to high temperatures, minimizing the

contamination typical with low temperature analyses

•Single hexapole collision cell

•Ion-focusing slicer to improve resolution

•A new 50% longer vacuum-insulated flight tube provides

increased resolution and uses a dual-stage ion mirror for

improved mass accuracy

•A new faster pulser than on the 7200 Q-TOF that allows

extension of the mass range up to 3000 m/z

•A new 5 GS/s sampling rate with or without Transient-Level

Peak Picking (TLPP)

•Analog detector

•Independently GC-heated GC/MS interface

•Full RoHS compliance

•Three turbomolecular vacuum pumps

•Rotary vane foreline pump

•An optional isolated dry foreline pump

Overview 1

Q-TOF applications

Agilent 7250 Q-TOF GC/MS Concepts Guide 9

The 7250 Q-TOF incorporates a hexapole collision cell blanketed

with a nitrogen and helium gas mix, to improve the ion

fragmentation prior to detection quantification. It also includes

ion optics for focusing the ions prior to the flight tube and

detector.

This configuration has advantages for many applications. The

data is interpreted through the use of the MassHunter

WorkStation software, which provides quantitative and

qualitative analyses of the data obtained.

The 7250 Q-TOF can operate in either MS (TOF) mode or MS/MS

mode. When operating in MS mode, the instrument can obtain

high resolution, accurate mass measurements, and fast full

spectrum acquisition. MS/MS mode provides high resolution,

accurate mass measurements, and fast full product ion spectra

with high sensitivity. These features make the 7250 Q-TOF a

good tool for solving complex analytical problems, resolving

structural elucidation of unknowns, and confirmation of

non-target compounds.

Q-TOF applications

The 7250 Q-TOF GC/MS combination can quantify trace organic

compounds in complex matrices. The following applications use

this type of quantification:

•Food safety and research

•Environmental contaminants studies

•Toxicology

•Forensics

•Metabolomics and Metabolomics

•Natural product research

•Human and animal doping studies

•Energy research and petrochemicals

•Homeland security

Paired with the Agilent 7890 GC, the 7250 Q-TOF delivers

sensitive, reproducible analyses of target compounds in

complex matrices. This provides the following:

10 Agilent 7250 Q-TOF GC/MS Concepts Guide

1 Overview

Instrument control software

•Femtogram-level limits of detection and quantification

•Selective quantification of target compounds in high

chemical background samples

•Improved signal-to-noise ratios in complex matrices

•Ability to meet stricter regulations on sample analytical

limits for certain applications

•Simplified operation with Agilent’s data analysis software

•Fast MS/MS operation

•Reproducible mass accuracy

The 7250 Q-TOF offers the improved sensitivity in GC/MS

analysis that is required by many commercial and regulatory

applications.

Instrument control software

The MassHunter WorkStation Instrument Control software

allows you to perform the following tasks from a single window:

Prepare the instrument

•Start and stop the instrument from the software

•Download settings to the GC and the Q-TOF in real time to

control the instrument

•Evaluate if the MS parameters are within the limits to

produce the specified mass accuracy and resolution with

a Checktune report

•Optimize MS parameters automatically (Autotune) or

manually through Agilent tuning programs and print a tune

report

•Monitor the actual conditions of the instrument

•View the real-time plot for chromatograms and instrument

parameters (both GC and MS) and print a real-time plot

report

•View the centroided line spectrum of a peak or the mass

range profile spectrum of a peak in real time

Autres manuels pour 7250

Table des matières

Autres manuels Agilent Technologies Équipement de laboratoire

Agilent Technologies

Agilent Technologies Graphite Tube Atomizer GTA 120 Manuel utilisateur

Agilent Technologies

Agilent Technologies 5100 ICP-OES Mode d'emploi

Agilent Technologies

Agilent Technologies 1260 Infinity II Manuel utilisateur

Agilent Technologies

Agilent Technologies 5890 Manuel utilisateur

Agilent Technologies

Agilent Technologies G2747A Manuel utilisateur

Agilent Technologies

Agilent Technologies G1960-60470 Manuel utilisateur

Agilent Technologies

Agilent Technologies 16196A Manuel d'utilisation

Agilent Technologies

Agilent Technologies Bravo Platform Manuel utilisateur

Agilent Technologies

Agilent Technologies 7820A Manuel utilisateur

Agilent Technologies

Agilent Technologies CrossLab RapidFire 400 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6890 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 979 Instructions d'utilisation et de sécurité

Agilent Technologies

Agilent Technologies 5975 MSD Manuel utilisateur

Agilent Technologies

Agilent Technologies 990 Manuel utilisateur

Agilent Technologies

Agilent Technologies G1888 Manuel d'utilisation

Agilent Technologies

Agilent Technologies UHV-24 Manuel utilisateur

Agilent Technologies

Agilent Technologies G4319A Manuel utilisateur

Agilent Technologies

Agilent Technologies 6100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 240 Series AA Manuel utilisateur

Agilent Technologies

Agilent Technologies VGA 77 Manuel utilisateur

Agilent Technologies

Agilent Technologies 7890A Manuel

Agilent Technologies

Agilent Technologies 2200 TapeStation Manuel utilisateur

Agilent Technologies

Agilent Technologies Agilent 1260 Infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies 5975T LTM GC/MSD Manuel d'utilisation

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur

Yamato

Yamato BM510 Manuel utilisateur