Agilent Technologies 4100 Mode d'emploi

Agilent 4100

Microwave Plasma

Atomic Emission

Spectrometer

Site Preparation Guide

2 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide

Notices

No part of this guide may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Agilent Technologies, Inc. as governed

by United States and international

Guide Part Number

G8000-90001

Edition

First edition, August 2011

Printed in USA

Agilent products must only be used in

the manner described in the Agilent

product user guides. Any other use

may result in damage to the product

or personal injury. Agilent is not

responsible for any damages caused,

in whole or in part, by improper use of

the products, unauthorized alterations,

adjustments or modifications to the

products, failure to comply with

procedures in Agilent product user

guides, or use of the products in

violation of applicable laws, rules or

regulations.

Agilent shall not be liable for errors or

damages on products or performance

due to using non-Agilent genuine

parts.

Warranty

The material contained in this

document is provided “as is,” and is

subject to being changed, without

notice, in future editions. Further, to

the maximum extent permitted by

applicable law, Agilent disclaims all

warranties, either express or implied,

with regard to this guide and any

information contained herein,

including but not limited to the

implied warranties of merchantability

and fitness for a particular purpose.

Agilent shall not be liable for errors

or for incidental or consequential

damages in connection with the

furnishing, use, or performance of

this document or of any information

contained herein. Should Agilent and

the user have a separate written

agreement with warranty terms

covering the material in this

document that conflict with these

terms, the warranty terms in the

separate agreement shall control.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

Restricted Rights Legend

If software is for use in the

performance of a U.S. Government

prime contract or subcontract,

Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June

1995), or as a “commercial item” as

defined in FAR 2.101(a) or as

“Restricted computer software” as

defined in FAR 52.227-19 (June 1987)

or any equivalent agency regulation or

contract clause. Use, duplication or

disclosure of Software is subject to

Agilent Technologies’ standard

commercial license terms, and non-

DOD Departments and Agencies of the

U.S. Government will receive no

greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will

receive no greater than Limited Rights

as defined in FAR 52.227-14 (June

1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are fully

understood and met.

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed

or adhered to, could result in

personal injury or death. Do not

proceed beyond a WARNING notice

until the indicated conditions are

fully understood and met.

WARNING

CAUTION

Contents

Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide 3

Contents

1. Introduction 7

Installation Guidelines 8

Site Preparation Check-list 9

2. Safety Practices and Hazards 11

General 11

Plasma 12

Heat,VaporsandFumes 13

Compressed Gas Hazards 14

ElectricalHazards 15

OtherPrecautions 15

WarningSymbols 16

ColorCoding 17

CECompliance 18

ICES/NMB-001 18

3. Laboratory Environment 19

Suitability 19

Environmental Conditions 20

Temperaturecontrol 21

Cleanliness 21

Instrument cooling air supply 21

Workbench 22

Contents

4 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide

WorkbenchLocation 22

PCRequirements 23

4. Instrument Shipping Information 25

In-houseTransitRoutes 25

InsuranceAfterDelivery 26

WeightsandDimensions 26

TransitDamage 27

Unpacking the Instrument 28

5. Laboratory Facilities 29

ExhaustSystem 29

ElectricalPowerSupplies 30

Electricalrequirements 31

Instrument power connections 31

Other electrical connections 32

Fuses 32

GasSupplies 32

Cylinder storage instructions 34

Cryogenicliquids 34

WasteFluidContainer 35

Guidelines for Software Installation 35

Contents

Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide 5

6. AccessoriesandOptions 37

Organic Solvents or Hydrofluoric Acid 37

ExternalGasControlModule 38

Gasrequirements 38

Monochromator Optics Air Purge 39

Gasrequirements 40

Sample Preparation System (SPS 3) 40

Environmental conditions 41

Multimode Sample Introduction System (MSIS) 41

Agilent 4107 Nitrogen Generator 42

Environmental requirements 42

Maximum sound power level 42

Gasrequirements 43

Electricalrequirements 44

Weights and dimensions 44

7. Gas Requirements and Configurations 45

Compressed Air Requirements 45

Agilent 4100 MP-AES Gas Configurations 48

Introduction

6 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide

This page is intentionally left blank.

Introduction

Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide 7

1. Introduction

Installation Guidelines 8

Site Preparation Check-list 9

This guide contains the information required to successfully prepare

a site for an Agilent 4100 Microwave Plasma Atomic Emission

Spectrometer (MP-AES) instrument installation.

On completion of the site preparation, fill in the check-list on Page 9,

(striking out those entries not applicable), and send this check-list to

your local Agilent agent or Agilent sales and service office. As soon

as it is received, Agilent or its agent will contact you to arrange a

convenient time for installation.

References to the Agilent 4100 MP-AES instrument are applicable to

all models and configurations unless otherwise stated.

In case of difficulty in preparing for the installation, and for details

of operator training courses, please contact your Agilent sales

representative or field service engineer at the address given below:

Introduction

8 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide

Installation Guidelines

Allow a minimum of four hours for the installation by an Agilent field

service engineer. If accessories are included, allow a maximum of

eight hours.

The installation and familiarization will include the following

Instrument installation

Instrument software installation and registration

Accessory installation

Instrument installation performance tests

Basic customer training

Maintenance overview

Introduction

Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide 9

Site Preparation Check-list

I have prepared:

Exhaust system

Gas supplies

Nitrogen (separate supplies for the MP-AES and EGCM)

Air (separate supplies for the MP-AES and nitrogen

generator)

Argon

Electrical power supplies

Power connections

Personal computer with Windows 7 64-bit operating system

installed and printer

Waste container

Cooling air system (if required)

Accessories

SPS 3 – Sample Preparation System

EGCM – External Gas Control Module – including gas supplies

Monochromator Optics Purge – including gas supplies

Agilent 4107 Nitrogen Generator – including gas supplies

All preparations have been completed. Please arrange for the

installation to be completed as soon as possible. I understand that if

the installation site is not prepared in accordance with the enclosed

instructions, additional installation charges may be applicable.

Company name and address: 



Name:

Position:

Telephone: Date:

Preferred Installation date:

Signed:

Introduction

10 Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide

This page is intentionally left blank.

Autres manuels pour 4100

Table des matières

Autres manuels Agilent Technologies Équipement de laboratoire

Agilent Technologies

Agilent Technologies IMG-500 Manuel utilisateur

Agilent Technologies

Agilent Technologies DNA 1000 Kit Manuel utilisateur

Agilent Technologies

Agilent Technologies 6890 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 8860 Manuel utilisateur

Agilent Technologies

Agilent Technologies TPS-mobile Manuel utilisateur

Agilent Technologies

Agilent Technologies E2960B Series Instructions d'installation

Agilent Technologies

Agilent Technologies TS-8900 Mode d'emploi

Agilent Technologies

Agilent Technologies 240 Series AA Manuel utilisateur

Agilent Technologies

Agilent Technologies 85091C Manuel utilisateur

Agilent Technologies

Agilent Technologies AssayMAP 96AM Manuel d'utilisation

Agilent Technologies

Agilent Technologies 708-DS Manuel utilisateur

Agilent Technologies

Agilent Technologies M9302A Guide de l'utilisateur

Agilent Technologies

Agilent Technologies EXSLRSH110 Manuel utilisateur

Agilent Technologies

Agilent Technologies Varian 3800 GC Manuel utilisateur

Agilent Technologies

Agilent Technologies Triple Quadrupole LC/MS Manuel utilisateur

Agilent Technologies

Agilent Technologies 7820A Manuel utilisateur

Agilent Technologies

Agilent Technologies 5975 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 2200 TapeStation Manuel utilisateur

Agilent Technologies

Agilent Technologies UHV-24 Manuel utilisateur

Agilent Technologies

Agilent Technologies 1220 Infinity II LC Manuel utilisateur

Agilent Technologies

Agilent Technologies MX3000P Guide de sécurité

Agilent Technologies

Agilent Technologies 1260 Infinity II Quaternary System Manuel utilisateur

Agilent Technologies

Agilent Technologies 4150 TapeStation system Guide de l'utilisateur

Agilent Technologies

Agilent Technologies 53150A Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur

Yamato

Yamato BM510 Manuel utilisateur