Agilent Technologies 1260 Infinity Manuel utilisateur

Agilent 1260 Infinity

HPLC-Chip Cube

Interface (G4240A )

User Manual

HPLC-Chip Cube Interface User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

G4240-90006 Rev. B

Edition

05/2012

Printed in Germany

Agilent Technologies

Hewlett-Packard-Strasse 8

76337 Waldbronn

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation or

contract clause. Use, duplication or disclo-

sure of Software is subject to Agilent Tech-

nologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will receive

no greater than Limited Rights as defined in

FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

HPLC-Chip Cube Interface User’s Guide 3

In This Guide…

This manual gives an introduction to HPLC-Chip technology

and explains how to install, maintain and troubleshoot you

HPLC-Chip Cube.

1Introduction to HPLC-Chip Technology

2Introduction to the Chip Cube

3Site Preparation

4Installation

5Operation

6Maintenance Procedures

7Consumables and Maintenance Parts

Appendix A Appendix A Safety Information

4 HPLC-Chip Cube Interface User’s Guide

Contents

HPLC-Chip Cube Interface User’s Guide 5

Content

1 Introduction to HPLC-Chip Technology 9

Overview 10

Chip Types 13

The MS Calibration and Diagnosis Chip, Part No. G4240-61001 13

The Protein ID Chip, Part No. G4240-62001 14

Modes of Operation 14

More Chips 18

2 Introduction to the Chip Cube 19

Intended Use 20

Introduction 21

Power Switch 22

Safety Features 23

Main Assemblies 24

Principle of Operation 26

Flow Connections 29

3 Site Preparation 31

Site Requirements for the G4240A Chip Cube 32

Power Considerations 32

Bench Space 32

Environment 33

Sound Emission 34

Specifications of the G4240A HPLC-Chip Cube 34

4 Installation 37

Unpacking the Agilent G4240A HPLC-Chip MS Interface 38

Damaged Packaging 38

Delivery Checklist 38

6 HPLC-Chip Cube Interface User’s Guide

Contents

Accessory Kit 40

System Setup Considerations 42

Single Stack Setup 43

Tw i n S t a c k s 45

Preparation of Existing Systems 47

Chip Cube Hardware Installation 49

5Operation53

Chip Loading and Unloading 54

Configuration 55

Configure Loading Pump and Analytical Pump 55

Injection Flush Volume 56

Injector Flush Volume and the use of Injector Programs 57

Operational Parameters 60

Setting up Chip Cube Parameters 61

Chip (Valve Positions / Tip) 61

Time 62

Time Table 63

Instrument Actuals 63

Chip Details Screen 64

Spray Ignition 66

Conditions to avoid 69

6 Maintenance Procedures 71

Maintenance Overview 72

Replacing Capillaries 73

Cleaning the Valve Rotors (quick procedure) 76

Updating the Chip Cube Firmware 79

Contents

HPLC-Chip Cube Interface User’s Guide 7

7 Consumables and Maintenance Parts 81

HPLC-Chips 82

Capillaries 83

Fittings 84

Infusion Spare Parts 85

Valve Rotor Cleaning Tools and Replacement Parts 86

8 Appendix A

Safety Information 87

Safety Information 88

Power Cords 88

Operation 89

Safety Symbols 90

Chemical and Biological Safety 91

Lithium Batteries Information 92

The Waste Electrical and Electronic Equipment (WEEE) Directive

(2002/96/EC) 93

Legal Notice 94

8 HPLC-Chip Cube Interface User’s Guide

Contents

Agilent 1260 Infinity HPLC-Chip Cube MS Interface (G4240A)

Chip Cube User’s Guide

Agilent Technologies

Introduction to HPLC-Chip Technology

Overview 10

Chip Types 13

The MS Calibration and Diagnosis Chip, Part No. G4240-61001 13

The Protein ID Chip, Part No. G4240-62001 14

This chapter will provide you with a basic understanding of Agilent’s

HPLC-Chip technology and an overview of the currently available chips.

10 HPLC-Chip Cube Interface User’s Guide

1 Introduction to HPLC-Chip Technology

Overview

Traditional nanospray mass spectrometry has proven it's potential as a

cost-effective, sensitive and reproducible technique for the identification of

peptides at femtomol to atomol levels. However, connecting nano capillaries,

columns and valves frequently is a tedious procedure and requires user skills

and routine. When handled incorrectly, nano flow connections are prone to

leakage which are difficult to detect and result in poor system performance

and extended downtime of the complete system. Quartz nano spray needles

are prone to blockages and require frequent replacement.

With the invention of HPLC-Chip technology, Agilent is significantly reducing

the need for user interaction and making nanospray a rugged state-of-the-art

technology.

The cornerstone of chip technology is the HLPC-Chip, a 3-dimensional

structure made of sandwiched polyimide films. Grooves of specific dimensions

are laser-ablated into a layer of polyimide film. The lamination of a top and

bottom layer then forms channels of trapezoidal or triangular shape inside the

chip which can either be used as capillaries or, if filled with packing material,

as nanocolumns. One end of the chip tapers off into a polyimide nanospray

emitter.

Autres manuels pour 1260 Infinity

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Agilent Technologies Équipement de laboratoire

Agilent Technologies

Agilent Technologies 5975 MSD Manuel utilisateur

Agilent Technologies

Agilent Technologies 7820A GC Mode d'emploi

Agilent Technologies

Agilent Technologies BenchCel Manuel utilisateur

Agilent Technologies

Agilent Technologies TPS-mobile Manuel utilisateur

Agilent Technologies

Agilent Technologies Cryogenic Manuel utilisateur

Agilent Technologies

Agilent Technologies PlateLoc Manuel utilisateur

Agilent Technologies

Agilent Technologies 6490 Manuel

Agilent Technologies

Agilent Technologies AssayMAP Bravo Platform Manuel utilisateur

Agilent Technologies

Agilent Technologies 75000 Series C Manuel utilisateur

Agilent Technologies

Agilent Technologies 1290 infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies 990 Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Agilent Technologies

Agilent Technologies 490 Manuel utilisateur

Agilent Technologies

Agilent Technologies Infinity Binary Pump VL 1290 Manuel utilisateur

Agilent Technologies

Agilent Technologies OmnoBER 725 Manuel utilisateur

Agilent Technologies

Agilent Technologies 1260 Infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies G1960-60470 Manuel utilisateur

Agilent Technologies

Agilent Technologies PL-GPC 220 Manuel utilisateur

Agilent Technologies

Agilent Technologies 7820A Manuel utilisateur

Agilent Technologies

Agilent Technologies 7694 Manuel utilisateur

Agilent Technologies

Agilent Technologies 7890B Manuel utilisateur

Agilent Technologies

Agilent Technologies 1200 series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1290 Infinity II Manuel utilisateur

Agilent Technologies

Agilent Technologies 6890 Series Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur

Yamato

Yamato BM510 Manuel utilisateur