Agilent Technologies 1290 Infinity II Manuel utilisateur

Agilent Technologies

Agilent 1290 Infinity II

Variable Wavelength

Detector

User Manual

Agilent 1290 Infinity II VWD User Manual

Notices

No part of this manual may be reproduced

in any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

G7114-90000 Rev. B

Edition

12/2014

Printed in Germany

Agilent Technologies

Hewlett-Packard-Strasse 8

76337 Waldbronn

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation

or contract clause. Use, duplication or dis-

closure of Software is subject to Agilent

Technologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will receive

no greater than Limited Rights as defined in

FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could

result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION

notice until the indicated condi-

tions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice,

or the like that, if not correctly

performed or adhered to, could

result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indi-

cated conditions are fully under-

stood and met.

Agilent 1290 Infinity II VWD User Manual 3

In This Book

This manual covers the Agilent 1290 Infinity II Variable Wavelength

Detector (G7114B).

Find information on other Agilent Variable Wavelength Detectors in

separate manuals.

1 Introduction to the Variable Wavelength Detector

This chapter gives an introduction to the detector, instrument overview

and internal connectors.

2 Site Requirements and Specifications

This chapter gives information on environmental requirements, physical

and performance specifications.

3 Using the Module

This chapter explains the essential operational parameters of the module.

4 Preparing the Module

This chapter provides information on how to set up the detector for an

analysis and explains the basic settings.

5 Optimizing the Detector

This chapter provides information on how to optimize the detector.

6 Troubleshooting and Diagnostics

Overview about the troubleshooting and diagnostic features.

7 Error Information

This chapter describes the meaning of detector error messages, and

provides information on probable causes and suggested actions how to

recover from error conditions.

4 Agilent 1290 Infinity II VWD User Manual

In This Book

8TestFunctions

This chapter describes the detector’s built in test functions.

9 Maintenance

This chapter provides general information on maintenance of the detector.

10 Parts and Materials for Maintenance

This chapter provides information on parts for maintenance.

11 Identifying Cables

This chapter provides information on cables used with the Agilent 1200

Infinity Series modules.

12 Hardware Information

This chapter describes the detector in more detail on hardware and

electronics.

13 LAN Configuration

This chapter provides information on connecting the module to the Agilent

ChemStation PC.

14 Appendix

This chapter provides addition information on safety, legal and web.

Agilent 1290 Infinity II VWD User Manual 5

Contents

1 Introduction to the Variable Wavelength Detector 9

Introduction to the Detector 10

Product Description 11

Optical System Overview 12

Dual-Wavelength Mode 17

Leak and Waste Handling 18

Operating Principle 21

2 Site Requirements and Specifications 23

Site Requirements 24

Physical Specifications 27

Performance Specifications G7114B 28

3 Using the Module 31

Magnets 32

Turn on/off 33

Status Indicators 34

Instrument Configuration 35

Set up the Detector with Agilent Open Lab ChemStation 37

The Detector User Interface 38

Detector Control Settings 40

Method Parameter Settings 41

Scanning with the VWD 45

4 Preparing the Module 47

Leak and Waste Handling 48

Setting up an Analysis 50

Solvent Information 57

6 Agilent 1290 Infinity II VWD User Manual

Contents

5 Optimizing the Detector 63

Introduction 64

Match the Flow Cell to the Column 65

Set the Detector Parameters 68

Warm up of the Detector 69

6 Troubleshooting and Diagnostics 71

Available Tests versus Interfaces 72

Agilent Lab Advisor Software 73

7 Error Information 75

What Are Error Messages 77

General Error Messages 78

Detector Error Messages 85

8TestFunctions 95

Introduction 96

Intensity Test 97

Cell Test 100

Wavelength Verification-Calibration 102

ASTM Drift and Noise Test 104

Quick Noise Test 105

Dark Current Test 107

Holmium Oxide Test 109

D/A Converter (DAC) Test 112

Other Lab Advisor Functions 115

9 Maintenance 117

Introduction to Maintenance 118

Warnings and Cautions 118

Overview of Maintenance 120

Cleaning the Module 121

Remove and Install the Doors 122

Replace the Deuterium Lamp 123

Replace the Flow Cell / Cuvette Holder 126

Repairing the Flow Cells 128

Agilent 1290 Infinity II VWD User Manual 7

Contents

Using the Cuvette Holder 131

Correcting Leaks 133

Replacing Leak Handling System Parts 135

Replace the Module Firmware 136

10 Parts and Materials for Maintenance 139

Overview of Maintenance Parts 140

Standard Flow Cell 10 mm / 14 µL 142

Micro Flow Cell 3 mm / 2 µL 144

Semi-micro Flow Cell 6 mm / 5 µL 146

High Pressure Flow Cell 10 mm / 14 µL 148

Cuvette Holder 150

Accessory Kit 151

11 Identifying Cables 153

Cable Overview 154

Analog Cables 156

Remote Cables 158

CAN/LAN Cables 162

RS-232 Cables 163

USB Cables 164

12 Hardware Information 165

Firmware Description 166

Electrical Connections 169

Interfaces 172

Setting the 6-bit Configuration Switch 179

Instrument Layout 183

Early Maintenance Feedback 184

8 Agilent 1290 Infinity II VWD User Manual

Contents

13 LAN Configuration 187

What You Have to Do First 188

TCP/IP parameter configuration 189

Configuration Switch 190

Initialization Mode Selection 191

Dynamic Host Configuration Protocol (DHCP) 195

Manual Configuration 198

PC and Agilent ChemStation Setup 202

14 Appendix 211

General Safety Information 212

Waste Electrical and Electronic Equipment Directive 220

Radio Interference 221

Sound Emission 222

Solvent Information 223

Declaration of Conformity for HOX2 Filter 224

Agilent Technologies on Internet 225

Agilent 1290 Infinity II VWD User Manual

Agilent Technologies

Introduction to the Variable Wavelength

Detector

Introduction to the Detector 10

Product Description 11

Optical System Overview 12

Flow Cell 13

Lamp 14

Source Lens Assembly 14

Entrance Slit Assembly 14

Filter Assembly 15

Mirror Assemblies M1 and M2 16

Grating Assembly 16

Beam Splitter Assembly 16

Photo Diodes Assemblies 16

Photo Diode ADC (analog-to-digital converter) 16

Dual-Wavelength Mode 17

Leak and Waste Handling 18

Waste Concept 20

Operating Principle 21

This chapter gives an introduction to the detector, instrument overview and

internal connectors.

10 Agilent 1290 Infinity II VWD User Manual

1Introduction to the Variable Wavelength Detector

Introduction to the Detector

The Agilent variable wavelength detectors described in this manual are

designed for highest optical performance, GLP compliance and easy

maintenance with:

•higher data rate up to 240 Hz for ultra- fast- HPLC (G7114B),

•deuterium lamp for highest intensity and lowest detection limit over a

wavelength range of 190 to 600 nm,

•optional flow- cell cartridges (standard 10 mm, 14 µL; high pressure

10 mm, 14 µL; micro 3 mm, 2 µL; semi- micro 6 mm, 5 µL) and Prep

Cells are available and can be used depending on the application needs

(other types may be introduced later),

•Dual wavelength mode, see “Dual- Wavelength Mode” on page 17.

•easy front access to lamp and flow cell for fast replacement,

•electronic identification of flow cell and lamp with RFID (Radio

Frequency Identification) tag for unambiguous identification,

•lamp information: part number, serial number, production date,

ignitions, burn time

•cell information: part number, serial number, production date,

nominal path length, volume, maximum pressure

•built- in electronic temperature control (ETC) for improved baseline

stability, and

•built- in holmium oxide filter for fast wavelength accuracy verification.

Autres manuels pour 1290 Infinity II

Table des matières

Autres manuels Agilent Technologies Équipement de laboratoire

Agilent Technologies

Agilent Technologies M9302A Guide de l'utilisateur

Agilent Technologies

Agilent Technologies 7890A Manuel utilisateur

Agilent Technologies

Agilent Technologies EXSLRSH110 Manuel utilisateur

Agilent Technologies

Agilent Technologies InfinityLab LC Companion Mode d’emploi

Agilent Technologies

Agilent Technologies Agilent 33500 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 7000 Triple Quadrupole GC/MS Manuel utilisateur

Agilent Technologies

Agilent Technologies CrossLab RapidFire 400 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6500 Series Manuel d'utilisation

Agilent Technologies

Agilent Technologies 8000 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 700 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1290 infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies Infinity Binary Pump VL 1290 Manuel utilisateur

Agilent Technologies

Agilent Technologies 1260 Infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies Labware MiniHub G5584A Manuel utilisateur

Agilent Technologies

Agilent Technologies QuickSwap G3185B Manuel

Agilent Technologies

Agilent Technologies Varian 325-MS LC/MS Manuel utilisateur

Agilent Technologies

Agilent Technologies 1260Infinity II Bio-inert FractionCollector Manuel utilisateur

Agilent Technologies

Agilent Technologies 1290 Infinity II 2D-LC Solution Manuel utilisateur

Agilent Technologies

Agilent Technologies 7820A Manuel utilisateur

Agilent Technologies

Agilent Technologies 990 Manuel utilisateur

Agilent Technologies

Agilent Technologies G1978B Manuel utilisateur

Agilent Technologies

Agilent Technologies 1260 Infinity II Manuel utilisateur

Agilent Technologies

Agilent Technologies 7200 Manuel utilisateur

Agilent Technologies

Agilent Technologies 1220 Infinity II LC Manuel d'installation et d'exploitation

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur

Yamato

Yamato BM510 Manuel utilisateur