Aerpro AM9XFW Manuel utilisateur
INSTALL/USER MANUAL
AM9XFW
DISCLAIMER: We recommend using an Authorised Dealer that offers an installation service
to install this product. Never cut or modify a harness as this could damage the head unit and
vehicle, as well as void the warranty of the product.
Android Auto, Google Play, Android, are registered trademarks of
Google, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Apple, Apple Car Play, Apple iPhone, Apple Music and Siri are registered
trademarks of Apple, Inc.
Android Auto and Apple CarPlay is not owned or controlled by any car manufacturer and are not
responsible for the privacy practices of third parties or the terms and conditions under which they offer
such products. We strongly encourage you to read the Android Auto or Apple CarPlay privacy policies
and terms and conditions to make sure they are acceptable to you.
9” FLOATING MULTIMEDIA RECEIVER
Wireless Apple CarPlay & Android AutoTM
INCLUSIONS: Head unit, GPS antenna, microphone, wiring harness,
mounting sleeve, trim ring, release keys, side panel covers, AV cable & screws
Step #1 Adjusting the LCD Extension (optional)
• Depending on the vehicle, it may be necessary to use the LCD extension to adjust the
screen position when mounting the unit. The default setting is all the way forward, but if
adjustment is necessary, the following steps show how to adjust it to the desired position.
• Depending on your vehicle’s dash, the LCD mounting bracket can be adjusted to 3 positions
(Flush ,1/2" and 1"). The bracket comes in the Flush setting when purchased. To adjust the
bracket to either the 1/2" or 1" setting, gently pull the LCD bracket out from the chassis, adjust
it to the desired position and lock it in place by inserting the screws to the top of the chassis.
(see below images for reference)
1
INSTALLATION
Peel off the label before
installation.
1“ (25mm) 1/2“ (12.5mm) Flush
Remove the 4 screws located
on top of the unit.
Note: Do not remove the center screw.
Step #2 Install Mounting Sleeve and Trim Ring
1) Install the mounting sleeve into a dash kit (sold separately) or dash opening, bending the
tabs to secure the mounting sleeve.
2) Connect the wiring harness, microphone and antenna to the chassis of the headunit.
3) Snap trim ring into place making sure the notched area is on the bottom.
4) Slide the head unit into the mounting sleeve to secure.
INSTALLATION
2
Step #3 Connecting the LCD to the Head Unit
• To connect the LCD to the unit, carefully push the LCD wiring harness into the LCD
connector of receiver's chassis as shown below.
• Use the hinge hooks on the back of the monitor to hold the LCD in place.
INSTALLATION
3
6
Step #4 Securing the LCD
• Once the LCD is on the hinge hooks (step #3), use 2 hands to rotate the LCD 90° to the left,
and secure one side using 2 LCD mounting screws. Then rotate the LCD to right 90° and
secure the other side using the additional 2 LCD mounting screws.
INSTALLATION
4
1
2
90°
3
4
90°
Facias are vehicle specific and their installation may differ, and may have additional
supplied brackets or parts and fittings. Refer to the QR code on the product box or visit our
website and search for your vehicle/product for vehicle specific facia installation procedures
if applicable.
We recommend the use of hand tightening tools only as over-tightening may damage the
facia plastics.
Step #4 Side Panel Covers
• Once all four screws have been fastened, cover the LCD extension areas with the side panel
covers to complete youre installation.
Note: There are three cover options. One to fit each of the three LCD depth extension
settings. ( A-Flush , B-1/2” (12.5mm) or C- 1”(25mm)
INSTALLATION
5
7
1“ (25mm)
1/2“ (12.5mm)
Flush
6
WIRING DIAGRAM - INPUTS/OUTPUTS
GPS antenna
INTERFACE ICONS
FEATURES
• Large touchscreen LCD (1024 x 600)
• Works with Apple CarPlay (wireless or wired)
• Supports Android Auto (wireless or wired)
• Built-in Bluetooth (A2DP, AVRCP, HFP, PBAP)
• AM / FM Tuner with RDS & presets (18FM/12AM)
• Reverse camera input (AHD 720P compatible)
• Rear A/V input
• 4V / 6CH RCA Preout
• MP3 / AAC / FLAC / MPEG 1,2,4 Media formats
• Subwoofer level control
• Time alignment capabilities
• Dual USB Front/Rear (2.1A/1.5A)
• 8 Band graphic EQ
• 8 EQ Presets
• 40W x 4 Max built-in amplifier
• Shallow 1-DIN chassis mounting design
• Steering wheel control ready
• External microphone included
• Hema Maps Ready, Aerpro AMHXD3
Integrated Navigation Module required
(sold separately) © Hema Maps 2022. Copyright
7
1. Voice Activation Button
2. SOURCE/HOME
3. Power/Volume/Mute
4. Previous Button
5. Next Button
6. RESET / USB Media/Charge port
4 5 61211 3
RADIO MODE
To enter Radio Mode, touch “Radio” icon on the Main Menu
Seek down
Home screen/back button
Radio frequency
Seek up
AF and TA settings
Display On/Off
FM Band button
AM Band button
Auto Store button
EQ Mode button
Keypad button
or
or
4 5
7
6
8
12
10
12
11
3
9
11
Auto Tuning
Press the seek icon ( ) on the TFT Monitor screen to increase / decrease the
tuning frequency one step at 0.05MHz increments for FM and 9KHz increments for AM.
Press and hold the seek icon ( ) on the TFT Monitor screen to seek the available
channel by increasing or decreasing the tuning frequency.
FM and AM
Touch the “FM1” or “AM1” on the screen to change among the following bands: FM1,
FM2, FM3 or AM1 and AM2.
Preset Stations
Six(6) stored stations for the current band appear on the screen, touch the preset directly
for use or press the number buttons located on the head unit.
Storing a Station
1. Select a station. (Example: FM1 103.6MHz)
2. Touch and Hold the desired preset number for 3 seconds to store the Radio station.
Recalling a Stored Station
1. Select a Band (If needed).
2. Touch the preset button on which the corresponding radio station is stored or press the
number button on the Radio panel.
8
Preset station list
MEDIA PLAYING MODE
1
6
2
3
4
5
9
This operation allows you to play various compatible formats.
/
10
8
7
11
12
13
14
Touch the icon to return to previous track or press and hold the icon to fast rewind
Touch the icon to play or pause the track
Touch the icon to go to next track or press and hold the icon to fast forward
Touch the end of the progress bar line and drag it left or right to the desired track time
Touch the icon to repeat a folder or track
Touch the icon to activate / deactivate the track in random mode
Touch the icon to show the track list
Touch the icon to display the equalizer settings
Playing track ID3 info (needs media file support)
Touch to go back to previous folder
Touch for music list
Touch for video list
Touch for keypad for quick search
File List
9
Autres manuels pour AM9XFW
1
Table des matières
