AEROCOMPACT COMPACTFLAT SN 2 Manuel utilisateur

USER MANUAL

COMPACTFLAT

SN 2 Mounting Gauge

VERSION: 01

LANGUAGE: ENGLISH | ORIGINAL LANGUAGE: GERMAN

IMPORTANT! READ CAREFULLY BEFORE USE!

CompactFLAT SN 2 Mounting Gauge 2

LEGAL NOTICE

The user manual is protected by copyright. This manual may not be copied, reproduced, microfilmed, translated, or con-

verted for storage and processing in computer systems, in whole or in part, without the written permission of

AEROCOMPACT®.

MANUFACTURER

AEROCOMPACT® Holding

Sonnenstraße 10

A 6822 Satteins | Austria

office@aerocompact.com

www.aerocompact.com

UPDATE

This manual is subject to change without notice. This does not represent any obligation on the part of the manufacturer.

CREATION DATE

02/2023

CompactFLAT SN 2 Mounting Gauge 3

TOC

Set up mounting gauge 4

Use mounting gauge to align the feet 4

Use mounting gauge to align base rails 5

Apply mounting gauge 6

Positioning the feet - SN 2 (5° or 10°) 6

Positioning the feet - SN 2 Plus 7

Positioning the base rail 8

CompactFLAT SN 2 Mounting Gauge 4

SET UP MOUNTING GAUGE

The mounting gauge can be used to align the base rails as well as the feet.

To insert the spacers, remove the end caps on one side. After inserting the spacers, reattach the end caps accordingly.

Use mounting gauge to align the feet

Insert the spacer (1) into the guide rail (2) and move it to the desired position. Then tighten with the locking screw (3).

CompactFLAT SN 2 Mounting Gauge 5

Use mounting gauge to align base rails

Insert the spacer (1) into the guide rail (2) and move it to the desired position. Then tighten with the locking screw (3).

CompactFLAT SN 2 Mounting Gauge 6

APPLY MOUNTING GAUGE

Positioning the feet - SN 2 (5° or 10°)

Mount the first three feet (1-3) according to the mounting instructions.

The correct spacing dimensions of the feet must be taken from the planning documents.

Place the mounting gauge according to the illustration and fix the spacer (distance A = 50 mm).

The adjusted mounting gauge can now be repositioned, applying the spacer from foot (1) to foot (3).

Position new feet and mount them afterwards.

The mounting gauge is now set for the SN 2 system and can be used as a gauge for the project.

CompactFLAT SN 2 Mounting Gauge 7

Positioning the feet - SN 2 Plus

Mount the first three feet (1-3) according to the mounting instructions.

The correct spacing dimensions of the feet must be taken from the planning documents.

Place the mounting gauge according to the illustration and fix the spacer (distance A = 50 mm).

The adjusted mounting gauge can now be repositioned, turning the mounting gauge 180° and placing it on the opposite

side, leaving the two spacers (2) and (3) between the two rear feet (see illustration).

Depending on the type of clamp, the relevant spacer (1) must be selected:

Short-side clamping: B = 31 mm

Long-side clamping: B = 23 mm

Position the front feet on both sides of the spacer (1) and fix them in place.

The mounting gauge is now set for the SN 2 Plus System and can be used as a gauge for the project.

CompactFLAT SN 2 Mounting Gauge 8

Positioning the base rail

Determine the distances between the base rails.

The correct spacing dimensions of the base rails must be taken from the planning documents.

Place the mounting gauge according to the illustration and fix the spacer.

The adjusted mounting gauge can now be repositioned, with the spacer of base rail (1) being placed at base rail (3).

Apply the mounting gauge along the base rails several times so that the base rails are aligned parallel.

Place the two new base rails.

The mounting gauge is now set and can be used as a gauge for the project.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels AEROCOMPACT Support et étagère

AEROCOMPACT

AEROCOMPACT CompactPITCH XW Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur