AENO AR2S Manuel utilisateur

2 aeno.com/documents

EN How to connect

RU Как подключиться

BG Как да се свържете

CZ Jak se připojit

EE Kuidas ühendada

HU Hogyan kell csatlakozni

AM Ինչպես միանալ

GE როგორ დავუკავშირდეთ

KZ Қалай қосылуға болады

LT Kaip prisijungti

LV Kā izveidot savienojumu

PL Jak podłączyć się

RO Cum să vă conectați

SK Ako sa pripojiť

UA Як підключитися

UZ Қандай уланади

CN 如何连接Wi-Fi

aeno.com/documents 3

EN

…………………………………………………………………………………………………………………………………………

6

RU

…………………………………………………………………………………………………………………………………………

1

3

BG

…………………………………………………………………………………………………………………………………………

2

0

CZ

…………………………………………………………………………………………………………………………………………

2

7

EE

…………………………………………………………………………………………………………………………………………

3

4

HU

…………………………………………………………………………………………………………………………………………

4

0

AM

…………………………………………………………………………………………………………………………………………

4

7

GE

…………………………………………………………………………………………………………………………………………

5

3

KZ

……………………………………………………………………………………………………………………………………………

6

1

LT

……………………………………………………………………………………………………………………………………………

68

LV

………………………………………………

……………………………………………………………………………………………

7

5

PL

…………………………………………………………………………………………………………………………………………

8

2

RO

………………………………………………………………………………………………………………………………………

9

0

SK

……………………………………………………………………………………………………………………………………………

97

UA

…………………………………………………………………………………………………………………………………………

10

4

UZ

…………………………………………………………………………………………………………………………………………

1

2

CN

…………………………………………………………………………………………………………………………………………

1

19

4 aeno.com/documents

a)

aeno.com/documents 5

b) c)

6 aeno.com/documents

EN The AENO Air Purifier is a household appliance designed to clean

indoor air from allergens, pollen, fungal spores, dust particles, smoke,

animal hair, and unpleasant odors.

Specifications

Input voltage: 100–240V~, 50/60Hz. Rated power: 48W. Air flow rate:

350m3/h. Coverage: 42 m2. Indoor air purification time: 2-3 hours. Noise level:

Up to 66dB (at a distance of 1m). Dimensions (L × W × H): 590mm × 100mm

× 395mm. Built-in UV LED. Wi-Fi module. RF remote control. Remote

control range: 10.5m.

Package Contents

Air purifier, HEPA filter, remote control, mounting screw (3 pcs.), power cord,

support, wall bracket, plugs (2 pcs.), plastic inserts (4 pcs.), self-tapping

screws (4 pcs.), quick start guide, warranty card.

Limitations and Warnings

ATTENTION! The device is equipped with a built-in UV LED. It is not allowed

to disassemble the device and turn it on when disassembled, because it

may be very harmful for eyes.

Make sure the purifier is unplugged before removing the front panel. Do

not immerse the purifier in water or any other liquid. Do not use aggressive

and flammable chlorine- or alcohol-containing agents to clean the purifier.

Water is not allowed to enter the body of the purifier. Use the device as

described in this Quick Start Guide and the complete User Manual only.

Failure to follow the instructions may result in fire and other hazardous

situations, as well as injuries. Do not use the device if it is damaged or

cracked. Do not install the device outdoors or near sources of water,

including humidifiers. Do not expose the device to direct sunlight, moisture

or vibration. Do not drop, throw, disassemble the device, or try to repair it

on your own. Do not lay the power cable near radiators, stoves, or heaters.

Do not use cleaning agents or detergents to clean the device. Do not

aeno.com/documents 7

dispose of the device with unsorted urban waste, because this will be

harmful for the environment. For more information on proper disposal,

please contact your local waste collection and disposal company. Keep

children away from the device. There is a risk of serious injury and electric

shock. This device is intended for use by adults only.

Warnings, precautions, and instructions contained herein may not contain

every possible hazardous situation. Please use common sense when

operating the device.

Components of the Air Purifier (See Figure a)

❶ – Air inlet, ❷ – Removable front panel, ❸ – HEPA filter, ❹ – Plastic plugs,

❺ – Purified air outlet, ❻ – Casing, ❼ – Mounting screws, ❽ – Support, ❾ –

Wall mounting bracket.

Initial Setup (See Figure a)

Before operation, you should remove the packaging from the HEPA filter.

To do this, first make sure that the air purifier is unplugged. Then, carefully

remove the front panel ❷ and pull the HEPA filter ❸ out using the fabric

strips. Remove the filter packaging, and insert the HEPA filter ❸ back into the

device body. Close the front panel ❷.

There are two options to install the purifier as follows:

 On the support: Insert the plugs ❹ in the open ends of the support ❽.

Attach the support with the three mounting screws ❼ to the purifier casing

❻.

 On the wall: Attach the wall bracket ❾ to the wall as desired (at a height of

at least 170cm from the floor). Screw the three mounting screws ❼ into the

back of the purifier casing ❻. Insert the heads of the mounting screws ❼

on the back of the purifier into the grooves of the wall bracket ❾ attached

to the wall.

8 aeno.com/documents

Button Panel Control (See Figure b)

The room air quality indicator/timer display shows either the room air

quality or the time period during which the purifier is switched on. The

indicator indicates that ultraviolet air purification process is ongoing. The

speed button allows you to change the fan speed of the purifier every

time you press it (The fan speed will be displayed by the air speed

indicator ). If the speed button is pressed and held for more than 10 seconds

while the device is in a standby mode, the timer set for the service life of the

HEPA filter will start from zero. The “Start/Stop” button is used to switch

the purifier on and off. The Sleep Mode button is used to switch the purifier

into the Sleep Mode at a minimum fan speed where all indicators go out

except for the Sleep Mode button. To exit this mode, press the button again.

The Automatic Mode button is used to start one of the three available

modes of operation of the purifier based on the room air quality. The Wi-Fi

button is used to activate the Wi-Fi Module of the purifier to control it

remotely from a smartphone. For more information, see the AENO app

connection process described in the User manual available at

aeno.com/documents. The indicator changes its colour depending on

the level of air pollution by organic compounds (glues, paints, varnishes,

solvents, etc.). The timer button is used to switch the air quality indicator

to the timer mode. By additional clicks on this button, you may set the timer

for the purifier operation: from 1 to 24 hours. The Child Lock button will

be activated, if pressed and clicked for 3 seconds. As a result, all buttons

become unavailable for control. To enable the buttons, you need to press

and hold this button for 3 seconds again. The ioniser button is used to

switch on the ionizer which helps to remove unpleasant odors. The filter

aeno.com/documents 9

reset button indicates the time to replace the HEPA filter. Press and hold

this button for 3 seconds to stop flashing.

Controlling the air purifier using the remote control (See Figure c)

The following buttons are available on the remote control: Switching on/off

, Sleeping Mode , Timer , Automatic Mode , Fan Speed .

Troubleshooting

1. The purifier does not turn on. Possible causes and solutions: Make sure that

the purifier is plugged into the mains socket, and that there is no power

supply failure, as well as that the circuit breaker is on, and that the fuses are

intact, and that the filter change LED is blinking red.

2. Dust is poorly removed. Possible causes and solutions: Make sure that the

filter surface is not clogged and that there are no obstructions preventing

air intake or discharge.

3. The device makes a loud noise. Possible causes and solutions: Make sure

that nothing is stuck in the fan, and that the purifier is not tilted. If the noise

is still too loud, try to reduce the fan speed using the fun speed button. Also,

use Sleep Mode to operate the purifier at night.

4. Unpleasant odor coming out from the purifier. If the device emits a plastic

smell during the first few hours of operation, this is deemed to be normal.

However, the device may also emit an unpleasant odor when the filter is

clogged. In this case, the filter must be cleaned or replaced. If you smell

burning, unplug the purifier immediately. Then, contact our Support Dept

or the Seller of the device for assistance.

5. The filter change LED is blinking after the filter was replaced or cleaned.

Possible causes and solutions: Press and hold the filter button for at least 3

seconds. The filter replacement timer will restart and the indicator will turn

off.

10 aeno.com/documents

ATTENTION! If your problem persists, please contact your local supplier or

the service center for support. Please do not disassemble the device or try

to repair it on your own.

Connection to the AENO mobile app

ATTENTION! Please make sure that your phone is connected to a 2.4 GHz Wi-Fi

network as 5 GHz networks are not supported by the device.

 Connect the device to a power supply and turn it on.

 Download the AENO mobile app from Google Play or the App Store and

create a new account, or log in to your user account.

 On the main screen of the app, tap "+" or "Add device" (if there are no added

devices in the app). Select "Air purifier" in the window that opens.

Note: If the system prompts you to turn on any features on your smartphone,

follow the recommendations in the prompts.

 Enter your Wi-Fi network name and password if the fields have not been

filled in automatically. Tap "Next". Make sure that the EZ mode is selected in

the upper right corner.

 As a general rule, the device's Wi-Fi button starts blinking when you turn on

the device for the first time. On the "Tips to Connect Devices" screen, check

the "Make sure that the LED indicator is blinking" box and tap "Next".

 Wait for the "Device successfully added" message to appear *.

 If the connection to the device does not occur, press and hold the Wi-Fi

button for about 3 seconds until the device beeps. Repeat the connection

process as described above.

Note: It is recommended to stay as close as possible to the device and, if

possible, to the router at the moment of connection to ensure a stable Wi-Fi

signal.

After that, you will be able to control your device from the app. To learn about

remote control scenarios, see the full manual at aeno.com/documents.

AENO AR2S Manuel utilisateur

Manuels Purificateur d'air populaires d'autres marques