Advent ADVDLX9 Manuel utilisateur
ADVDLX9
9" OVERHEAD LED BACKLIT
LCD MONITOR WITH
DVD PLAYER
R
INSTALLATION
GUIDE
TABLE OF CONTENTS
IMPORTANT NOTICES ...................................................................................................................................................................................................................2
GENERAL SYSTEM CONFIGURATIONS IR TRANSMIT AND RECEIVE MODES M1 OR M2 .............................................................................................3
MATERIALS INCLUDED IN THIS PACKAGE................................................................................................................................................................................4
INSTALLING THE UNIT IN A VEHICLE.........................................................................................................................................................................................5
INSTALLING THE SNAPON SHROUD AND SCREEN COVER .................................................................................................................................................6
INSTALLING THE TRIM RING........................................................................................................................................................................................................7
GENERAL VEHICLE INSTALLATION APPROACH ......................................................................................................................................................................9
VEHICLE PREPARATION............................................................................................................................................................................................................. 10
CONNECTING THE DOME LIGHTS ........................................................................................................................................................................................... 11
INSTALLING THE MOUNTING BRACKET................................................................................................................................................................................. 13
INSTALLING THE ADVDLX9 VIDEO SYSTEM.......................................................................................................................................................................... 14
INSTALLING THE SCREW CAPS AND USB COVER ................................................................................................................................................................ 16
TROUBLESHOOTING .................................................................................................................................................................................................................. 17
APPENDIX A REMOVING THE TRIM RING, SNAPON SHROUD AND SCREEN COVER ............................................................................................... 18
APPENDIX B INSTALLING THE OPTIONAL THICK TRIM RING ........................................................................................................................................ 19
NOTES............................................................................................................................................................................................................................................ 20
1
IMPORTANT NOTICES
2
Installation of overhead products requires careful planning and
preparation. Be extremely careful when working on a vehicle with
side curtain air bags. Do not route wires near any portion of the side
curtain air bag assemblies. This includes anchor points in A, B, C or D
pillars of the vehicle. Routing wires in these areas or running wires by
the side curtain air bags can prevent the side curtain air bag from fully
deploying which can result in personal injury to vehicle occupants. If
you have any question regarding routing in a vehicle, please contact
Audiovox Technical support at 1-800-225-6074.
An LCD panel and/or video monitor may be installed in a motor vehicle
and visible to the driver only if the LCD panel or video monitor is used
for vehicle information, system control, rear or side observation or
navigation. If the LCD panel or video monitor is used for television
reception, video or DVD play, the LCD panel or video monitor must be
installed so that these features will only function when the vehicle is in
“park” or when the vehicle’s parking brake is applied.
An LCD panel and/or video monitor used for television reception,
video or DVD play that operates when the vehicle is in gear or when
the parking brake is not applied must be installed to the rear of the
driver seat where it will not be visible, directly or indirectly, to the
operator of the motor vehicle.
WARNINGS
• Do not use any solvents or cleaning materials when cleaning the
video monitor.
• Do not use any abrasive cleaners, they may scratch the screen.
• Use only lightly dampened lint free cloth to wipe the screen if it is
dirty.
• Lock the LCD screen in fully closed position when not in use.
• Before putting on headphones, always adjust the volume setting to
OFF or lowest position.
• Remember to leave the dome light switch in the o or auto position
when the vehicle is unattended, as the dome lights, if left on, can
drain the vehicle battery.
• Do not put pressure on the screen.
• Caution children to avoid touching or scratching the screen, as it
may become dirty or damaged.
Safety Precautions
For safety reasons, when changing video media, it is recommended
that the vehicle is not in motion, and that you do not allow children to
unfasten seat-belts to change video media or make any adjustments
to the system. System adjustments can be accomplished using the
remote control, while seat-belts remain fastened. Enjoy your ADVENT
entertainment system but remember that the safety of all passengers
remains the number one priority.
The ADVDLX9 incorporates three new features:
1)A wireless FM Modulator
2)Snap on Covers with matching Trim Rings (Black, Shale and
Pewter). Select the color that matches the interior trim.
3)Switchable M1/M2 modes (See page 3)
Please be advised that the wireless FM modulator will perform well in
most applications. However, in certain applications the quality of the
wireless signal may be less than optimal, resulting in static or strong
local station bleed through.
Licensed under one or more of the following patents, Patent Numbers
5,775,762, 5,927,784, and 6,678,892.
When connecting power and ground in a mobile video installation,
insure that the ACC wire is fused at the point where it is connected
to the vehicle’s ACC wiring. Failure to do so can result in damage
to the vehicle if a short circuit develops between the vehicle
connection point and the mobile video product.
*** Important Notices***
When installing this overhead monitor there should be no
obstructions such as extra cabling, power chokes or any other
objects placed between this overhead and supplied mounting
bracket. Failure to comply may cause damage to the overhead
monitor and will void the warranty.
3
The following is intended to provide some of the system congurations that are possible with the ADVDLX9 Overhead LED Backlit LCD Monitor
with DVD Player:
The ADVDLX9 has an option that allows the user to select from two IR transmit and receive codes (M1 or M2). This feature can be used when using
two ADVDLX9s in the same installation or if the vehicle has an RSA (Rear Seat Audio) that uses an“A”channel headset. The ADVDLX9 comes factory
set to M1. When in the M1 mode the unit will respond to remote commands when M1 is selected on the remote and will transmit audio on the A
channel. When in the M2 mode the unit will respond to remote commands when M2 is selected on the remote and will transmit audio on the B
channel.
NOTE: M1 will appear on the screen for 4~5 seconds.
Selecting a Monitor Code (M1 or M2)
1. Power ON the unit and wait until M1 on the OSD appears. M1 will appear on the screen for 4~5 seconds.
2. To change the monitor code, press the System Menu button.
3. Use the por qcursor buttons to select the Monitor Mode menu option. Press OK to conrm the setting.
4. Use the por qcursor buttons to select the desired monitor mode (M1 or M2), then press OK to conrm the setting.
5. Press the System Menu button on the remote to exit the System Menu mode.
The two overheads can be connected together using the RCA cables.
• Plug the AV OUT of the M1 unit into the AV IN of the M2.
• Plug the AV IN of the M1 unit into the AV OUT of the M2.
GENERAL SYSTEM CONFIGURATIONS
FMM OFF
M2
DVD
IRT OFF
FMM 88.3MHz
M1
AUX/GAME
IRT ON
SYSTEM MENU
OSD LANGUAGE
DEFAULT DVD ON/OFF
SCREEN MODE
FM MODULATOR
MONITOR MODE
WARNING
SETTING THE MONITOR TO THE M2 MODE WILL
REQUIRE USING 2-CHANNEL HEADPHONES.
USE THE DOWN KEY ON THE REMOTE CONTROL
TO SELECT M2 AND PRESS OK TO SET THE
MONITOR TO M2 MODE
TO REMAIN IN THE M1 MODE PRESS OK
M1
M2
4
MATERIALS INCLUDED IN THIS PACKAGE
1. 9” TFT LCD Overhead Monitor With DVD Player - (1 pc)
2. Hardware Package (P/N 150-1661) - (1 pkg)
M3 x 8mm Phillips Screws (P/N 100-2427) - (5 pcs)
#4 x 5/16” Phillips Self Tapping Screw (P/N 100-2316) - (1 pc)
#4 x 7/16” Phillips Self Tapping Screws (P/N 100-2426) - (3 pcs)
#8 x 3/8” Self Drilling Screws (P/N 100-2397) - (4 pcs)
M5 x 10mm Phillips Screws (P/N 100-2394) - (4 pcs)
M5 x 20mm Phillips Screws (P/N 100-2581) - (4 pcs)
M5 x 40mm Phillips Screws (P/N 100-2582) - (4 pcs)
CAUTION: The 10mm, 20mm and 40mm screws in the hardware kit are
provided to facilitate installation. Use extreme caution when using these
screws to avoid damage to vehicle roof or other components, wiring, etc.
3. Remote Control w/ Battery (P/N 136-5326) - (1 pc)
4. Universal Mounting Bracket (P/N 108-3921) - (1 pc)
5. 6 Pin Power/Dome Light Harness (P/N 112-4270) - (1 pc)
6. AUX Pigtail (P/N 112B3227) - (1 pc)
7. 5 Pin AV input Harness (Blue Connector - P/N 112-4259) - (1 pc)
8. 5 Pin AV output Harness (White Connector - P/N 112-4260) - (1 pc)
9. Pry Tool (P/N 100-2424) - (1 pc)
10. USB Cover (P/N 102-4599) - (1pc)
11. Screw Cap - Shale (P/N 102-4253) - (2 pcs)
- Pewter (P/N 102-4254) - (2 pcs)
- Black (P/N 172-0197) - (2 pcs)
12. Trim Ring - Shale (P/N 102-4231) - (1 pc)
- Pewter (P/N 102-4232) - (1 pc)
- Black (P/N 172-0180) - (1 pc)
13. Snap On Cover (Screen Back) - Shale (P/N 102-4233) - (1 pc)
- Pewter (P/N 102-4234) - (1 pc)
- Black (P/N 102-4617) - (1 pc)
14. Snap On Cover (Shroud) - Shale (P/N 172-0183) - (1 pc)
- Pewter (P/N 172-0184) - (1 pc)
- Black (P/N 172-0196) - (1 pc)
15. Wireless Headphones w/ Batteries (P/N 136-5301) - (2 pcs)
16. Installation Guide & Owner’s Manual (Not Shown) - (1 of each)
123
4
6
7 &
5
9
10
8
11
13
14
12
15
3.2. 4.1. 5. 6.
INSTALLING THE UNIT IN A VEHICLE
Tools Required
Installing the Snap On Covers
The ADVDLX9 is supplied with black, shale and pewter plastics to allow a custom installation. Choose the desired cover and install as follows.
1. #2 Phillips Screwdriver
2. #1 Phillips Screwdriver
3. Utility or Razor Knife
4. Wire Strippers
5. Upholstery hook tool (for removal of panels as necessary)
6. Electrical Tape
7. Masking Tape
8. Multimeter to verify 12 volt DC and continuity (Do not use a test
light or logic probe)
9. Marker pen – to mark headliner, to mark trim ring if used
10. Misc. Electrical Connectors (to connect to vehicle power source,
requirements will vary from vehicle to vehicle)
11. DVD Movie (to verify system operation after installation)
Preparation
Place the unit on a soft surface to avoid damaging the plastic.
5
Housing Snap On Cover
(Shroud)
1 Black, 1 Pewter, and
1 Shale
Snap On Cover
(Screen Back Cabinet)
1 Black, 1 Pewter, and
1 Shale
Pry Tool Screw Cap
(L & R)
2 Black, 2 Pewter,
and 2 Shale
USB Cover
6
Installing the Shroud
1. Remove the tape backing from the front and rear areas at the
bottom of the shroud.
2. Hook the shroud over the dome light (areas “A” as shown).
3. Carefully align the two catches (1) with the openings on the DVD
player (2) and slide the Shroud down until the Shroud snaps into
the catches on either side.
4. Apply pressure to the front and rear of the shroud in the area of
the double sided tape to ensure that the tape adheres.
Installing the Screen Cover
(B) (B)
1. Open the LCD screen.
2. Hook the two tabs “B” (as shown) on the bottom edge of the
screen.
3. Carefully snap the opposite side over the hinge.
NOTE: If the wrong color Shroud and Screen Cover is installed, refer to
Appendix A of this manual for instructions to change the Shroud and
Screen Cover color.
INSTALLING THE SNAPON SHROUD AND SCREEN COVER
NOTE: Work on a soft surface to avoid damaging the plastic.
(A)
Tape Backing
(Front and Rear)
(A)
1
2
1
2
7
Installing the Trim Ring
1. Turn the DVD Player over on a surface with protective covering to prevent scratches.
2. Using a screwdriver, remove the three screws located in the “A” locations shown in the gure above. These screws can be discarded as new
screws are supplied in the hardware kit.
3. Place the trim ring onto the DVD Player.
The trim ring is attached to the video monitor using the perimeter screw bosses. It is important that the screws used in this installation are not over
tightened, and that the video monitor and trim ring are mounted in such a way that the assembly does not distort (or bend) when the mounting
screws are tightened.
There are two Trim Ring options for mounting the ADVDLX9, one is to use the supplied Trim Ring for all vehicles with at headliner mounting areas
(no contour) or a thick Trim Ring (not supplied) that can be cut to t the contour of a headliner that is not at (see Appendix B of this manual)
NOTE: The trim rings supplied with this unit are not designed to be trimmed.
INSTALLING THE TRIM RING
(A)
(A)
(A)
9
9
4. Locate the #4 x 5/16”self-tapping screw in the hardware kit.
5. Using a screwdriver, install the #4 x 5/16” self-tapping screw into the location marked “B” shown in the gure below.
6. Locate the three (3) #4 x 7/16” self-tapping screws in the hardware kit.
7. Using a screwdriver, install the three (3) #4 x 7/16”self-tapping screws into the locations marked“C” shown in the gure below.
8. Locate the ve (5) M3 x 8mm screws in the hardware kit.
9. Using a screwdriver, install the ve (5) M3 x 8mm screws into the locations marked “D” shown in the gure above.
NOTE: Use caution tightening screws as the threads may strip in the DVD Player.
8
INSTALLING THE TRIM RING
Trim Ring DVD
PLAYER
TRIM
RING
ON DVD
PLAYER
(B)
(C)
(C)
(C)
(D)
(D)
(D)
(D) (D)
TRIM RING SCREW SET
(B) #4 X 5/16” SELF TAPPING SCREW
(QTY 1)
(C) #4 X 7/16” SELF TAPPING SCREW
(QTY 3)
(D) M3 X 8mm SCREW
(QTY 5)
(B) (C) (D)
9
9
Table des matières
Autres manuels Advent Lecteur DVD portable
