Advent ADVMP78 Manuel utilisateur
1
Precautions
yBefore using the camera, please ensure that you read and understand the safety
precautions described below. Always ensure that the camera is operated correctly.
yDo not aim the camera directly into the sun or other intense light sources which could
damage your eyesight.
yDo not try to open the case of the camera or attempt to modify this camera in any way.
High-voltage internal components create the risk of electric shock when exposed.
Maintenance and repairs should be carried out only by authorized service providers.
yDo not fire the flash too close to the eyes of animals or people, especially for young
children. Eye damage may result. In particular, remain at least one meter away from
infants when using flash.
yKeep the camera away from water and other liquids. Do not use the camera with wet
hands. Never use the camera in the rain or snow. Moisture creates the danger of
electric shock.
yKeep the camera and its accessories out of the reach of children and animals to prevent
accidents or damage to the camera.
yIf you notice smoke or a strange odor coming from the camera, turn the power off
immediately. Take the camera to the nearest authorized service centre for repair. Never
attempt to repair the camera on your own.
yUse only the recommended power accessories. Use of power sources not expressly
recommended for this equipment may lead to overheating, distortion of the equipment,
fire, electrical shock or other hazards.
2
-
I
f
y
ou
see
t
hi
s
s
ym
bol
-
This symbol on the product or in the
instructions means that your electrical
and electronic equipment should be
disposed at the end of its life
separately from your household waste.
There are separate collection systems
for recycling in the EU.
For more information, please contact
the local authority or your retailer
where you purchased the product.
Care of the camera
yDo not strongly shake or bump the
camera. The camera may stop
operating normally, pictures may not be
recorded or the lens may be damaged.
ySand or dust may cause the camera
to malfunction. Make sure that sand
or dust does not get into the lens or
the terminals when using the camera
on a beach etc.
yMake sure the water does not get into
the camera when using it on a rainy day
or on a beach.
yIf water or seawater splashes on the
camera, use a dry cloth to wipe the
camera body carefully.
About the LCE monitor
yDo not press the LCD monitor with
excessive force. Uneven colours
may appear on the LCD monitor
and it may malfunction.
yCondensation may form on the LCD
monitor in places whit large
temperature differences. Wipe the
condensation with a soft, dry cloth.
yIf the camera is cold when you turn it
on, the picture on the LCD monitor
will be slightly darker than usual at
first. However, the picture will return
to normal brightness when the
internal temperature of the camera
increases
Extremely high precision
technology is employed to produce
the LCD monitor screen. However
there may be some dark or bright
spots (red, blue or green)
on the screen. This is not malfunction.
The LCD monitor screen has more
than 99.99% effective pixels whit a
mere 0.01% of the pixels inactive in
active or always lit. The spots will not
be recorded on pictures on the
built-in memory or a card.
About the Lens
yDo not press the lens with excessive
force.
yDo not leave the camera with the lens
facing the sun as it may cause the
camera to malfunction. Also, be careful
when you leave the camera outside or
near a window.
Before Use
3
About Condensation (When the lens
is fogged up)
yCondensation occurs when the
ambient temperature or humidity
changes as described below. Be
careful of condensation since it
causes lens stains, fungus and
camera mal function.
- When the camera is taken form the
cold outdoors to the warm indoors.
- When the camera is taken from
outside to inside an air-conditioned
car.
- When cool wind from an air
conditioner etc. blows directly on the
camera.
- In humid places.
yTo prevent condensation, put the
camera in a plastic bag until the
temperature of the camera is close to
the ambient temperature. If
condensation occurs, turn the camera
off and leave it for about 2 hours. The
fog will disappear naturally when the
temperature of the camera becomes
close to the ambient temperature.
When not using the camera for a
long period of time.
yStore the battery in a cool and dry place
with a relatively stable temperature.
[Recommended temperature 15ºC to
25ºC, Recommended humidity: 40% to
60%]
yAlways remove the battery and the card
from the camera.
yIf the battery is left inserted in the
camera, it will discharge even if the
camera is turned off. If the battery
continues to be left in the camera, it will
discharge excessively and may
become unusable even if charged.
yWhen storing the battery for a long
period of time, we recommend charging
it once a year. Remove the battery from
the camera and store it again after it
has completely discharged.
yWe recommend storing the camera with
a desiccant (Silica gel) when you keep
it in a closet or a cabinet.
Before Use
4
,
1. Shutter Button
2. Flash
3. Power Button
4. Speaker
5. USB/AV Terminal
6. Microphone
7. Lens
8. Self-timer Lamp
9. LCD Monitor
10. Operation Lamp
11. Zoom Button
12. Strap Ring
13. Playback Button
14. Menu Button
15. Four-way Control
yFlash Button
yMacro Button
ySET / DISP Button
16. Mode Button
17. Delete Button
18. Battery Cover
yThe memory card slot is located
beneath the battery cover, adjacent
to the battery compartment.
19. Tripod Socket
5
Inserting the Batteries
Open the battery cover.
ySlide the battery cover in the
direction indicated by the arrow.
Insert the batteries.
yInsert two AA-size batteries with
the positive (+) and negative (-)
poles matching the directions
indicated inside the battery room.
Close the battery cover.
Low Battery Indicator
A low battery indicator appears on the LCD screen when the batteries are nearly
exhausted. Batteries should be replaced promptly when the low battery indicator appears.
1
2
3
6
Inserting the Memory Card
You can use SD Card with this digital camera. The memory card slot is located beneath the
battery cover, adjacent to the battery compartment.
Open the battery cover.
ySlide the battery cover in the
direction indicated by the
arrow.
Insert the card.
yInsert the card with the label
facing up and the arrow
pointing in.
yTo remove the card, gently press on the edge of the card and release it. Pull
the card out and close the battery cover.
Close the battery cover.
yIt may cause damage to the card if removed while the camera is on.
yDo not touch the connection terminals on the back side of the card.
1
2
3
T
Ti
ip
ps
s
C
Ca
au
ut
ti
io
on
n
7
Using the LCD Monitor
The LCD monitor is used to compose images while recording, adjust settings and replay images.
The following indicators may appear on the LCD monitor while recording or playing back images.
REC mode
1 Recording mode 13 White balance
2 Flash 14 Shutter speed
3 Macro 15 Shake warning
4 Self-timer / Burst 16 Aperture value
5 Zoom indicator 17 Face tracking
6 Shots remaining 18 Exposure
7 Battery 19 Focus area
8 Storage media 20 Date stamp
9 Stabilizer 21 AEB
10 Metering 22 Sharpness
11 ISO 23 Quality
12 Histogram 24 Resolution
8
Changing the Mode
You can record images and voices in the REC mode. And using the PLAYBACK mode to
replay, delete, or edit images on the LCD monitor.
Switching between REC mode and PLAYBACK mode
In REC mode, press the PLAYBACK button
(n) to switch to the PLAY mode.
In PLAY mode, press the PLAYBACK (n) or
the MODE (o) button to switch to the REC
mode.
Selecting the REC mode
Set the camera to the REC mode
Launch the mode palette.
yPress the MODE button (o) to
show the scene mode palette.
Select a mode.
yUse the four-way control to
select a desired mode and press
the SET button to confirm the
setting.
3
1
2
9
Using the Menus
When a menu is displayed, the four-way control and the SET button are used to make the
desired settings.
REC menu
Turn the power on, and set the
camera to the REC mode.
Open the REC menu.
yPress the MENU button to
display the menu.
Select an item.
Press or to select a menu item.
Change the setting.
Press or to change the setting.
Press the MENU or the SET button to save the settings and close the menu.
3
4
5
1
2
Table des matières
Autres manuels Advent Appareil photo numérique
