Advantech PCI-1762 Manuel utilisateur

User Manual

PCI-1762

16-ch Relay & 8-ch Isolated

Digital Input PCI Card

PCI-1762 User Manual ii

The documentation and the software included with this product are copyrighted 2011

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2003176200 Edition 1

Printed in Taiwan May 2011

iii PCI-1762 User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Warnings, Cautions and Notes

Document Feedback

To assist us in making improvements to this manual, we would welcome comments

and constructive criticism. Please send all such - in writing to: support@advan-

tech.com

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data. e.g.

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

Note! Notes provide optional additional information.

PCI-1762 User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

15. The power cord or plug is damaged.

16. Liquid has penetrated into the equipment.

17. The equipment has been exposed to moisture.

18. The equipment does not work well, or you cannot get it to work according to the

user's manual.

19. The equipment has been dropped and damaged.

20. The equipment has obvious signs of breakage.

21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

v PCI-17621762 User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.1.1 PCI-1762 16-ch Isolated Digital Input and 16-ch Relay Output Card

1.2 Features .................................................................................................... 2

1.3 Applications............................................................................................... 3

1.4 Installation Guide ...................................................................................... 3

Figure 1.1 Installation Flow Chart ................................................ 4

1.5 Software Overview .................................................................................... 4

1.6 Accessories............................................................................................... 5

Chapter 2 Installation............................................7

2.1 Unpacking ................................................................................................. 8

2.2 Switch and Jumper Settings...................................................................... 8

Figure 2.1 Card Connector, Jumper and Switch Locations ......... 8

Table 2.1: Summary of Jumper Settings ..................................... 9

Table 2.2: Summary of jumper settings for relay......................... 9

2.3 I/O Connectors ........................................................................................ 10

Figure 2.2 I/O connector pin assignments for the PCI-1762...... 10

2.4 Driver Installation .................................................................................... 11

Figure 2.3 Advantech Automation Software Setup.................... 11

Figure 2.4 Driver Setup Options ............................................... 12

2.5 Hardware Installation .............................................................................. 12

Figure 2.5 Device Name on the Device Manager...................... 13

2.6 Device Setup & Configuration ................................................................. 14

Figure 2.6 Device Manager Dialog Box ..................................... 14

Figure 2.7 Device Setting Dialog Box ........................................ 15

Chapter 3 Signal Connections ..........................17

3.1 Overview ................................................................................................. 18

3.2 Isolated Digital Input Connections........................................................... 18

Figure 3.1 Isolated Digital Input Connections ............................ 18

3.3 Relay Connections .................................................................................. 19

Figure 3.2 Relay Output Connection ......................................... 19

Appendix A Specifications ....................................21

A.1 Specifications .......................................................................................... 22

Table A.1: Isolated Digital Input ................................................. 22

Table A.2: Relay Output............................................................. 22

Table A.3: General Specifications.............................................. 22

Appendix B Block Diagram ...................................23

B.1 Block Diagram......................................................................................... 24

Appendix C Register Structure and Format......25

PCI-1762 User Manual vi

C.1 Overview ................................................................................................. 26

C.2 I/O Port Address Map ............................................................................. 26

Table C.1: Register Functions ................................................... 26

C.3 C.3 Relay I/O Registers - BASE+0H and BASE+1H ............................. 27

Table C.2: Register for Relay Output Status.............................. 27

Table C.3: Register for Relay Output......................................... 27

C.4 Isolated Digital Input Registers - BASE+2H and BASE+3H ................... 27

C.5 Board ID - BASE+4H .............................................................................. 28

Table C.4: Register for Board ID................................................ 28

C.6 Interrupt Status Register - BASE+6H and BASE+7H ............................. 28

Table C.5: Register for Interrupt Status ..................................... 28

C.7 Interrupt Control Register - BASE+6H and BASE+7H............................ 29

Table C.6: Register for Interrupt Control.................................... 29

Appendix D Flow Chart ......................................... 31

D.1 Flow Chart............................................................................................... 32

Chapter 1

1Overview

PCI-1762 User Manual 2

1.1 Introduction

Thank you for buying the Advantech PCI-1762 DAS card. The Advantech PCI-1762

DAS card is a 16-ch relay actuator and 16-ch isolated digital input card for the PCI

bus.

Its sixteen on-board SPDT relays are ideal for applications such as device ON/OFF

control or small power switched. For easy monitoring, each relay is equipped with

one red LED to show its ON/OFF status.

The PCI-1762’s sixteen optically-isolated digital input channels are ideal for digital

input in noisy environments or with floating potentials.

1.1.1 PCI-1762 16-ch Isolated Digital Input and 16-ch Relay Output

Card

The following sections of this chapter will provide further information about features

of the DAS cards, a Quick Start for installation, together with some brief information

on software and accessories for the PCI-1762 card.

1.2 Features

16 relay output channels and 16 isolated digital input channels

LED indicators to show activated relays

Jumper selectable Form A/Form B-type relay output channel

Output status read-back

Keep relay output values when hot system reset

High-voltage isolation on input channels (2,500 VDC)

High ESD protection (2,000 VDC)

High over-voltage protection (70 VDC)

Wide input range (10 ~ 50 VDC)

Interrupt handling capability

High-density DB-62 connector

Board ID

The Advantech PCI-1762 offers the following main features:

Robust Protection

The PCI-1762 digital input channels feature a robust isolation protection for industrial, lab and

machinery automation applications. It durably withstands voltage up to 2,500 VDC, preventing

your host system from any incidental harms. If connected to an external input source with

surge-protection, the PCI-1762 can offer up to a maximum of 2,000 VDC ESD (Electrostatic

Discharge) protection. Even with an input voltage rising up to 70 VDC, the PCI-1762 can still

manage to work properly albeit only for short period of time.

Wide Input Range

The PCI-1762 has a wide range of input voltage from 10 to 50 VDC, and it is suitable for most

industrial applications with 12 VDC, 24 VDC and 48 VDC input voltage.

Board ID

The PCI-1762 has a built-in DIP switch that helps define each card’s ID when multi-

ple PCI-1762 cards have been installed on the same PC chassis. The board ID set-

ting function is very useful when users build their system with multiple PCI-1762

3 PCI-1762 User Manual

Chapter 1 Overview

cards. With the correct Board ID settings, the user can easily identify and access

each card during hardware configuration and software programming.

Reset Protection Fulfills Requirement for Industrial Applications

When the system has undergone a hot reset (i.e. without turning off the system

power), the PCI-1762 can either retain outputs values of each channel, or return to its

default configuration as open status, depending on its on-board jumper setting. This

function protects the system from wrong operations during unexpected system

resets.

Plug-and-Play Function

The PCI-1762 is a Plug-and-Play device, which fully complies with PCI Specification

Rev 2.2. During card installation, there is no need to set jumpers or DIP switches.

Instead, all bus-related configurations such as base I/O address and interrupt are

automatically done by the Plug-and-Play function.

1.3 Applications

Industrial On/Off control

Switch status sensing

Digital I/O control

Industrial and lab automation

SMT/PCB machinery

Semi-conductor machinery

PC-based Industrial Machinery

Testing & Measurement

Laboratory & Education

External relay driving

1.4 Installation Guide

Before you install your PCI-1762 card, please make sure you have the following nec-

essary components:

PCI-1762 card

PCI-1762 User's Manual

Driver software - Advantech DLL drivers (included in the companion CD-ROM)

Wiring cable - PCL-10162 (optional)

Wiring board - ADAM-3962 (optional)

PC or workstation with a PCI-bus slot (running Windows XP/Vista/7)

Application software - ActiveDAQ Pro or other 3rd-party software

After you get the necessary components and maybe some of the accessories for

enhanced operation of your Multifunction card, you can then begin the Installation

procedures.

PCI-1762 User Manual 4

Figure 1.1 Installation Flow Chart

1.5 Software Overview

Advantech offers a rich set of DLL drivers, third-party driver support and application

software to help fully exploit the functions of your PCI-1762 card:

DLL driver (on the companion CD-ROM)

LabVIEW driver

Advantech ActiveDAQ Pro

Programming choices for DA&C cards: You may use Advantech application software

such as Advantech DLL driver. On the other hand, advanced users are allowed

another option for register-level programming, although not recommended due to its

laborious and time-consuming nature.

DLL Driver

The Advantech DLL Drivers software is included on the companion CD-ROM at no

extra charge. It also comes with all the Advantech DA&C cards. Advantech's DLL

driver features a complete I/O function library to help boost your application perfor-

mance. The Advantech DLL driver for Windows XP/Vista/7 works seamlessly with

development tools such as Visual C++, Visual Basic and Visual Studio .Net

Use driver utility to configure hardware

Install Hardware and Turn on PC Power

Install Driver from CD-ROM, then power-off PC

Use test utility to test hardware

Read examples and driver manual

Start to write your own application

Table des matières

Autres manuels Advantech Carte PCI

Advantech

Advantech UNO-P166 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1737U Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1240 Manuel utilisateur

Advantech

Advantech PCIE-1744 Manuel utilisateur

Advantech

Advantech ECU-P1761 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1713U Manuel utilisateur

Advantech

Advantech PCI-1723 Manuel utilisateur

Advantech

Advantech PCI-1713 Manuel utilisateur

Advantech

Advantech PCI-1742U Manuel utilisateur

Advantech

Advantech DSPC-8682 Manuel utilisateur

Advantech

Advantech DVP-7635HE Manuel utilisateur

Advantech

Advantech PCA-5612 Manuel d'installation et d'exploitation

Advantech

Advantech PCIE-1884 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1761 Manuel utilisateur

Advantech

Advantech PCIE-1763AH Manuel utilisateur

Advantech

Advantech PCLD-8811 Manuel d'installation et d'exploitation

Advantech

Advantech DSPC-8661-PCXE Manuel utilisateur

Advantech

Advantech DVP-7020A Manuel utilisateur

Advantech

Advantech PCIE-1753 Manuel utilisateur

Advantech

Advantech PCI-1757UP Manuel utilisateur

Advantech

Advantech PCA-6008G2 Manuel utilisateur

Advantech

Advantech PCI-1761 Manuel utilisateur

Advantech

Advantech PCI-1710U Manuel utilisateur

Advantech

Advantech PCI-1733 Manuel d'installation et d'exploitation

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur