Advanced Wireless Communications Awr2108 Manuel utilisateur

IndustrialRadio

THANK YOU!

We are grateful for your purchase of Advanced

Wireless Communications product. We be-

lieve this easy–to-use radio will provide you

with dependable and reliable communications.

This Advanced Wireless Communications por-

table two-way radio is a precision device. Treat

it with care, and you will enjoy years of reli-

able operation.

* MODELS COVERED IN THIS MANUAL

AWR2108: UHF 450-470MHz

Owner’s Manual

WARNING

This radio has been tested and complies with the FCC

RF Exposure Limits for Occupational use and work-

related operations, where the operator must have

knowledge to control RF Exposure Conditions. When

transmitting, hold the radio in a vertical position at a

distance of 2.5 cm from the mouth and at least 1.5 cm

from the head and body. Do not transmit more than

50% of the duty cycle. Transmitting for more than

50% of the duty cycle can cause the FCC RF Exposure

Limits to be exceeded. Use onlyAdvanced Wireless

Communications authorized accessories.

Owner’s Manual

FCC License Information

Your Advanced Wireless Communications radio operates on com-

munications frequencies which are subject to FCC(Federal Commu-

nications Commission) Rules & Regulations. FCC Rules require that

all operators using Private Land Mobile radio frequencies obtain a

radio license before operating their equipment. Application for

license must be made on FCC form 601, and schedules D, E, and G.

FAX: Forms can be obtained by fax from the FCC Fax-On-Demand

system. Call 1-202-418-0177 from your fax machine and request

document number 000600 for the form, schedules, and instructions.

MAIL: Forms can be ordered by telephone, and will be sent to you

by first class mail. Call the FCC Forms Hotline at 1-800-418-

FORM (1-800-418-3676).

INTERNET: Form 601 and instructions can be downloaded from

the FCC Forms website at:

http://www.fcc.gov/Forms/Form601/601.html

Before filling out your Form 601 application Technical Data section,

you must decide which frequency (or frequencies) you will operate

on. Refer to the frequency chart on page 26.

Questions? Call the FCC for license application questions at

1-888-CALL-FCC (1-888-225-5322).

If you have any questions, callAdvanced Wireless Communications:

1-800-469-5400

IndustrialRadio

Notices to The User

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy.

Changes or modifications to this equipment may cause harmful

interference unless the modifications are expressly approved in

the instruction manual. The user could lose the authority to

operate this equipment if an unauthorized change or modifica-

tion is made.

Owner’s Manual

INFORMATION TOTHE DIGITALDEVICE

USER REQUIRED BY THE FCC

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a residen-

tial installation. This equipment generates, uses and can

generate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harm-

ful interference to radio communications. However, there is

no guarantee that the interference will not occur in a par-

ticular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer for technical assistance.

IndustrialRadio

SAFETYINFORMATION:

Your wireless portable two-way radio has been designed using

a low power transmitter.

When the PTT switch is pressed, the radio generates radio

frequency (RF) electromagnetic energy (EME). This radio is

designed to comply with the FCC Report and Order

FCC 96-326 (August, 1996).

CAUTION

• Do not transmit for more than 50% of the total operating

time. Transmitting for over 50% of the operating time may

exceed the FCC RF exposure compliance requirements.

Transmission occurs while you are pressing the PTT switch

and is confirmed by the LED that lights red whil etransmit-

ting.

• To transmit, speak into the microphone in your normal voice

while holding the radio upright and keep the antenna at least

2 inches (5 cm) from your head and body.

• When using a headset, ensure that the antenna is at least 2

inches (5 cm) away from your body whenever you are

transmitting.

• Use onlyAdvanced Wireless Communications genuine

accessories. Unauthorized modifications, or attachments may

damage the transceiver and violate FCC rules and regulations.

Owner’s Manual

User Safety Information

PLEASE READ THIS IMPORTANT INFORMATION

BEFORE USING YOUR Advanced Wireless Communications

PORTABLE TWO-WAY RADIO.

•Onlyqualifiedtechniciansareallowedtomaintainthisproduct.

•To avoid electromagnetic interference, turn off your radio in

places where posted notices instruct you to do so. Hospitals

or health care facilities may be using equipment that is

sensitive to external RF energy. When travelling on aircraft,

turn off your radio when the airline crew instructs you to do

so.

•When in vehicles equipped with an air bag, do not place a

portable radio in the airbag deployment area.

•Turn off your radio prior to entering any area with a

potentially explosive atmosphere. Do not remove, install, or

charge batteries in such areas.

•To avoid possible interference with blasting operations, turn

off your radio when you are near electrical blasting caps.

•Do not use any portable radio that has a damaged antenna. If

a damaged antenna comes into contact with your skin, a

minor burn may result.

•Do not expose the radio to direct sunlight for long periods of

time. Do not place the radio in direct contact with any heating

source.

IndustrialRadio

CONTENTS

Product Inspection........................................................................ 1

Battery Charging Information................................................. 2

Accessory Information ................................................................ 3

Battery........................................................................................ 3

Antenna...................................................................................... 3

Belt Clip...................................................................................... 4

Getting Started.............................................................................. 5

LCD Display ................................................................................... 8

Basic Operations .......................................................................... 9

Features ......................................................................................... 10

Monitor .................................................................................... 10

Channel Scan............................................................................ 10

Priority Channel Scan............................................................. 11

Scan Revert Channel ............................................................... 11

Selectable CTCSS/CDCSS ........................................................ 11

Selectable Squelch Level ......................................................... 13

High/Low Power ...................................................................... 13

Key Lock.................................................................................. 13

Time Out Timer(TOT) .......................................................... 14

Battery Save............................................................................. 14

Low Battery Alert ................................................................... 15

Busy Channel Lockout............................................................ 15

Backlight .................................................................................. 15

Troubleshooting Guide ............................................................. 16

Optional Accessories ................................................................. 16

Care and Cleaning .................................................................... 17

CTCSS/CDCSS Table ................................................................ 18

Frequency Chart ......................................................................... 20

Owner’s Manual

ProductInspection

Thank you for your purchase of Advanced Wireless Communi-

cations portable two-way radio model: AWR2108. Before use,

please inspect the product as follows.

First check the shipping carton for any signs of damage. If any

damage has occurred, please contact your dealer immediately.

Confirm the supplied product against the packing slip to assure

accuracy.

AvailableAccessories

Part number Item Qty.(pcs)

Antenna* 1

Adapter 1

Li-TON Battery 1

Belt Clip 1

Owner’s Manual 1

Charger cup 1

*Notes: Antenna mark: white.

Autres manuels pour awr2108

Table des matières

Autres manuels Advanced Wireless Communications Émetteur-récepteur