Advanced Instruments 3300 Manuel utilisateur
The Advanced® Micro-Osmometer
Model 3300
User’s Guide
3305 Rev9 012303
Copyright
This user’s guide is copyrighted by Advanced Instruments, Inc. with all
rights reserved. Under copyright laws, this guide may not be reproduced
in any form, in whole or part, without the prior written consent of
Advanced Instruments.
© 2002 Advanced Instruments, Inc.
Trademarks claimed in this document are the property of Advanced
Instruments, Inc.
Advanced Instruments has reviewed this guide thoroughly. All material
contained within is believed reliable, but the accuracy and completeness
are not guaranteed or warranted, and are not intended to be representations
or warranties concerning the product described.
Hot-Line®Service
If you have any questions or problems regarding the proper operation of
your instrument, please contact our Hot-Line Service department:
•800-225-4034 (toll-free within the USA and Canada)
•+US 781-320-9000 (elsewhere)
•781-320-0811 (fax)
ii
Advanced®Osmometer Model 3300 User’s Guide
Table of Contents
Parts & Accessories v
Calibrators & Standards vii
Safe Use ix
Symbol conventions ix
General cautions x
Foreword: Theory and Technique xiii
Chapter 1 — Installation & Setup 1
Step 1 — Find a location for your instrument 1
Step 2 — Unpack your instrument 1
Step 3 — Obtain additional items 2
Step 4 — Power up your instrument 2
Step 5 — Set your date and time 3
Step 6 — Check your initial calibration 3
Step 7 — Proceed to instrument operation 4
Chapter 2 — Instrument Operation 5
Hazardous material cautions 5
Function of major components 5
Sample handling 10
Standards & controls 10
Sample test procedure 11
Sample test errors 12
Recall results 13
Repeatability tips 13
Statistics 14
Changing operating settings 15
iii
Using a barcode scanner with the Model 3300 17
Using a printer with your the Model 3300 18
Using the Model 3300’s RS-232 port 18
Instrument software update 19
Chapter 3 — Calibration 21
Calibration procedure 21
Calibration notes 22
Chapter 4 — Troubleshooting & Service 25
Service & maintainance cautions 25
Obtaining service 27
Troubleshooting checks 28
Internal diagnostics 28
Fuse replacement 33
Chamber cleaning 34
Sample plunger replacement and calibration 34
Appendices
Appendix A: Troubleshooting Table 37
Appendix B: Product Specifications 43
Appendix C: Regulatory Notices 45
Appendix D: Warranty and warranty duties 47
Appendix E: Supplemental RS-232 information 51
Appendix F: Service log 53
Index 55
iv
Advanced®Osmometer Model 3300 User’s Guide
Parts & Accessories
v
To order parts and accessories, contact the Advanced Instruments
Customer Service Department:
•800-225-4034 (toll-free within the USA and Canada)
•+US 781-320-9000 (elsewhere)
•781-320-3669 (fax)
PART DESCRIPTION
20-µL Sampler
Replacement Sample Probe
Micro-Sample Test Kit (500 tests)
Sampler Plunger Wires (2)
Thermal Printer with Interface Cable, Operation Manual,
Thermal Paper Roll, and Printer Power Supply*
*Note: Contact customer service to order the appropriate
power supply.
Printer Paper (5 rolls)
User’s Guide
Service Manual
Serial Cable
Software Upgrade**
Barcode Scanner
PART NO.
3M0825
330700A
3MA800
3M0828
330555
3D3835
3305
3305SM
RS232-Cable
330990
330016
** Note: 330990 upgrade kit comes with a 3 meter serial cable #330053.
vi
Notes:
vii
Calibrators & Standards
To order calibrators and standards, contact the Advanced Instruments
Customer Service Department:
•800-225-4034 (toll-free within the contiguous 48 states)
•+US 781-320-9000 (elsewhere)
•781-320-3669 (fax)
DESCRIPTION
ClinitrolTM Reference Solution (10 2-mL ampules)
Protinol®3-Level Protein Control Kit (9 3-mL bottles, 3 of
each level)
5-Value Osmolality Linearity Set (10 2-mL ampules, 2 of
each value)
50 mOsm/kg Calibration Standard (10 2-mL ampules)
850 mOsm/kg Calibration Standard (10 2-mL ampules)
PART NO.
3MA029
3MA028
3LA028
3MA005
3MA085
viii
Notes:
Safe Use
To reduce the risk of bodily injury, electric shock, fire, and
damage to your instrument, please read and observe the pre-
cautions in this User’s Guide.
• If the product is used in a manner not in accordance with
the equipment design, operating instructions or manufac-
turer's recommendations, the operation of the product may
be impaired to the extent that a safety hazard is created.
• Do not attempt to perform electrical work if you are not
fully qualified. This manual is not a substitute for electrical
training.
Symbol conventions
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important oper-
ating and maintenance (servicing) instructions in the litera-
ture accompanying this product.
The lightning flash with arrowhead symbol within an equi-
lateral triangle is intended to alert the user to the presence
of uninsulated dangerous voltage within the product's
enclosure that may be of sufficient magnitude to constitute
risk of electric shock to persons.
The static symbol within an equilateral triangle is intended
to alert the user to the presence of internal components that
could be damaged by static electricity.
This static symbol is intended to alert the user to the pres-
ence of a specific component that could be damaged by
static electricity.
ix
This symbol indicates the presence of alternating current (AC).
This symbol indicates the presence of a fuse.
This symbol indicates the presence of protective earth ground.
General cautions
• This product should be operated only with the type of power source
indicated on the product’s electrical ratings label. Refer to the instal-
lation instructions included with the product.
• If the power cord provided is replaced for any reason or if an alter-
nate cord is used, the cord must be approved for use in the local
country. The power cord must be approved for the product’s listed
operating voltage and be rated at least 20% greater than the ampere
ratings marked on the product’s electrical ratings label. The cord
end that connects to the product must have an IEC 60320 connector.
• Plug the product into an approved grounded electrical outlet.
• Do not disable the power cord’s grounding plug.
• If an extension cord or power strip is used, make sure that the cord
or strip is rated for the product, and that the total ampere ratings of
all products plugged into the extension cord or strip do not exceed
80% of the cord’s or strip’s rating limit.
• Route power cords so that they will not be walked on, tripped on, or
pinched by items placed upon or against them. Pay particular atten-
tion to the plug, electrical outlet, and the point where the cord exits
the product.
• Do not pull on cords and cables. When unplugging cords or cables,
grasp the corresponding connector.
x
Advanced®Osmometer Model 3300 User’s Guide
Autres manuels pour 3300
1
Table des matières
Autres manuels Advanced Instruments Instrument de mesure
Advanced Instruments
Advanced Instruments GPR-1200 Manuel utilisateur
Advanced Instruments
Advanced Instruments GPR-IN190 Manuel utilisateur
Advanced Instruments
Advanced Instruments GPR-1800 AIS LD Manuel utilisateur
Advanced Instruments
Advanced Instruments 4C3 Manuel utilisateur
Advanced Instruments
Advanced Instruments OsmoTECH PRO Guide de configuration
Advanced Instruments
Advanced Instruments GPR-2500 Manuel utilisateur
Advanced Instruments
Advanced Instruments OsmoTECH PRO Manuel utilisateur
Advanced Instruments
Advanced Instruments A2O Manuel utilisateur
Advanced Instruments
Advanced Instruments OsmoPRO Manuel utilisateur
Advanced Instruments
Advanced Instruments 3320 Manuel utilisateur
Advanced Instruments
Advanced Instruments OsmoTECH Guide de configuration
Advanced Instruments
Advanced Instruments OsmoPRO Manuel utilisateur
Advanced Instruments
Advanced Instruments 3250 Manuel utilisateur
Advanced Instruments
Advanced Instruments 3250 Manuel utilisateur
Advanced Instruments
Advanced Instruments AE Series Manuel utilisateur
Advanced Instruments
Advanced Instruments 3300 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur