ADTRAN NetVanta 1524 Manuel utilisateur

Installing the NetVanta 1524 Series Switch P/N 1200560L1

Quick Start Guide

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ©2004 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at www.adtran.com

1GETTING STARTED —ACCESSING THE GUI 4. The initial GUI screen appears.

Two configuration methods are available for your NetVanta Switch:

• Web-Based GUI (discussed in this section)

• AOS CLI (discussed on page 2)

You may access the web-based GUI from any web browser on your network by

following these steps:

1. Connect the switch to your PC using the ETH 0/0 port on the back of the

unit.

2. Set your PC to obtain an IP address automatically (or if using a fixed IP

address, set your PC to 10.10.20.2).

3. Enter the unit’s IP address in your browser address line (see example,

below). The default IP address is 10.10.20.1.

4. You will then be prompted for the username and password (the default

settings are admin and password).

Installing the NetVanta 1524 Series Switch P/N 1200560L1

Quick Start Guide

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ©2004 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at www.adtran.com

For more details on CLI access, refer to the AOS Command

Reference Guide on your ADTRAN OS System

Documentation CD (included in shipment).

2ACCESSING THE CLI

The web-based GUI lets you configure the main switch settings and provides

online guidance and explanations for each setting. However, using the AOS

command line interface (CLI) may be necessary for more advanced

configurations. Access the AOS CLI via the CONSOLE port or a Telnet session.

To establish a connection to the NetVanta 1524 Switch CONSOLE port, you

need the following items:

• VT100 terminal or PC (with VT100 terminal emulation software)

• Straight-through serial cable with a DB-9 (male) connector on one end and

the appropriate interface for your terminal or PC communication port on the

other end

1. Connect the DB-9 (male) connector of your serial cable to the CONSOLE

port on the rear panel of the switch.

2. Connect the other end of the serial cable to the terminal or PC.

3. Insert the connector of the provided power cord into the power interface on

the rear panel of the unit, and plug the cord into a standard electrical outlet.

4. Once the switch has powered up, open a VT100 terminal session using the

following settings: 9600 baud, 8 data bits, no parity bits, and 1 stop bit.

Press <Enter> to activate the ADTRAN operating system command line

interface (AOS CLI).

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels ADTRAN Changer

ADTRAN

ADTRAN NetVanta 1748F Series Manuel utilisateur

ADTRAN

ADTRAN T1-FT1 Rackmounted DSU/CSU TDU 110DC Manuel utilisateur

ADTRAN

ADTRAN HTU-C M Manuel utilisateur

ADTRAN

ADTRAN 2FXS/DPO PM Manuel du produit

ADTRAN

ADTRAN E220 HFAC HDSL2 Mode d’emploi

ADTRAN

ADTRAN NetVanta 1544 Series Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1224R PoE Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1224ST Manuel du propriétaire

ADTRAN

ADTRAN NetVanta 7000 Series Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1024 Manuel utilisateur

ADTRAN

ADTRAN Total Access 128-Port CSM Manuel utilisateur

ADTRAN

ADTRAN Total Access Octal DS1 IMA Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1224STR PWR Manuel

ADTRAN

ADTRAN Total Access 1210 Guide d'installation

ADTRAN

ADTRAN D4 OCU DP (ETR) D4-OCU Mode d’emploi

ADTRAN

ADTRAN NetVanta 1560-48-740W Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1524ST Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1224ST Manuel utilisateur

ADTRAN

ADTRAN ATLAS 550 Manuel utilisateur

ADTRAN

ADTRAN 1xN Mode d’emploi

ADTRAN

ADTRAN NetVanta 1000 Series Manuel

ADTRAN

ADTRAN NetVanta 1560-48-370W Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1224 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1550 Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur