ADTRAN Total Access 850 Guide de l'utilisateur

64203376L1-1B

August 2004

TOTAL ACCESS 850

System Manual

1200375L1 Total Access 850 Chassis

1200373L1 T1 Bank Controller Unit (BCU)

1200373L2 T1 BCU with DSX Port

4203376L1#TDM T1 Router Control Unit (RCU) with TDM Software

4203376L1#ATM T1 RCU with ATM Software

1203376L1 3rd Generation T1 RCU

1200377L1 SDSL RCU

1200377L2 2nd Generation SDSL RCU

1203384L2 Echo Canceller with ADPCM

1175006L2 Power Supply Unit

1175043L3 AC Supply/Battery Charger

Trademarks Total Access 850 System Manual

Trademarks

Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of

their respective holders.

Total Access®is a registered trademark of ADTRAN, Inc.

To the Holder of the Manual

The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the

contents without prior notice.

In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses

even if ADTRAN has been advised thereof as a result of issue of this publication.

About this Manual

This manual provides a complete description of the Total Access 850 system and system software. The purpose of

this manual is to provide the technician, system administrator, and manager with general and specific information

related to the planning, installation, operation, and maintenance of the Total Access 850. This manual is arranged so

that needed information can be quickly and easily found.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (256) 963-8000

Printed in U.S.A.

Total Access 850 System Manual Revision History

Revision History

Conventions

Document Revision Date Description of Changes

AApril 2004 This is the first issue of this manual. The previous version of

this product was covered under document 64200376L1-1.

BAugust 2004 Update licensing and warranty agreement; correct third

generation part numbers.

Notes provide additional useful information.

Cautions signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the equipment or endangerment

to human life.

Safety Instructions Total Access 850 System Manual

Safety Instructions

When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire,

electrical shock, or personal injury:

1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool.

2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote risk of

shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not dispose of batteries

in a fire. They may explode. Check with local codes for special disposal instructions.

Save These Important Safety Instructions

Total Access 850 System Manual FCC-Required Information

FCC-Required Information

FCC regulations require that the following information be provided in this manual:

1. This equipment complies with Part 68 of the FCC rules and requirements adopted by ACTA. On the

equipment housing is a label showing the FCC registration number and ringer equivalence number (REN). If

requested, provide this information to the telephone company.

2. If this equipment causes harm to the telephone network, the telephone company may temporarily

discontinue your service. If possible, advance notification is given; otherwise, notification is given as soon

as possible. The telephone company will advise the customer of the right to file a complaint with the FCC.

3. The telephone company may make changes in its facilities, equipment, operations, or procedures that could

affect the proper operation of this equipment. Advance notification and the opportunity to maintain

uninterrupted service are given.

4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information.

The telephone company may require this equipment to be disconnected from the network until the problem

is corrected or it is certain the equipment is not malfunctioning.

5. This unit contains no user-serviceable parts.

6. An FCC compliant telephone cord with a modular plug is provided with this equipment. This equipment is

designed to be connected to the telephone network or premises wiring using an FCC compatible modular

jack, which is compliant with Part 68 and requirements adopted by ACTA.

7. The following information may be required when applying to your local telephone company for leased line

facilities.

8. The REN is used to determine the quantity of devices you may connect to your telephone line and still have

all of those devices ring when your number is called. Excessive RENs on the telephone line may result in the

devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs of all devices

should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as

determined by the total RENs, contact the local telephone company.

9. This equipment may not be used on coin service provided by the telephone company. Connection to party

lines is subject to state tariffs. Contact your state public utility commission or corporation commission for

information.

Part Number Registration Number Service Type REN/SOC FIC USOC

1200373L2

HDCUSA35154DEN

1.544 Mbps - SF

1.544 Mbps - SF and B8ZS 6.0N

04DU9-BN

04DU9-DN RJ-48C

1203376L1 1.544 Mbps - ESF

1.544 Mbps - ESF and B8ZS 04DU9-1KN

04DU9-1SN

1175407L2 HDCUSA35118CNN Analog Loop Start/Ground Start 2.9A 02LS2 RJ-21X

1175408L2 HDCUSA35102CNN

FCC-Required Information Total Access 850 System Manual

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to

radio frequencies. Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Total Access 850 System Manual Affidavit Requirements for Connection to Digital Services

Affidavit Requirements for Connection to Digital Services

• An affidavit is required to be given to the telephone company whenever digital terminal equipment without

encoded analog content and billing protection is used to transmit digital signals containing encoded analog content

which are intended for eventual conversion into voice band analog signal and transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or billing information is being transmitted or that

the output of the device meets Part 68 encoded analog content or billing protection specifications.

• End user/customer will be responsible to file an affidavit with the local exchange carrier when connecting

unprotected CPE to a 1.544 Mbps or subrate digital service.

• Until such time as subrate digital terminal equipment is registered for voice applications, the affidavit

requirements for subrate services are waived.

Affidavit Requirements for Connection to Digital Services Total Access 850 System Manual

AFFIDAVIT FOR CONNECTION OF CUSTOMER PREMISES EQUIPMENT

TO 1.544 MBPS AND/OR SUBRATE DIGITAL SERVICES

For the work to be performed in the certified territory of ___________________ (telco name)

State of ________________

County of ________________

I, _______________________ (name), ____________________________________ (business address),

____________________ (telephone number) being duly sworn, state:

( ) I have responsibility for the operation and maintenance of the terminal equipment to be connected to 1.544 Mbps

and/or ________ subrate digital services. The terminal equipment to be connected complies with Part 68 of the

FCC rules except for the encoded analog content and billing protection specifications. With respect to encoded

analog content and billing protection:

( ) I attest that all operations associated with the establishment, maintenance, and adjustment of the digital CPE with

respect to analog content and encoded billing protection information continuously complies with Part 68 of the

FCC Rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog content or billing information which

is intended to be decoded within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under the control of the customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the establishment, maintenance, and

adjustment of the encoded analog content and billing information has (have) been trained to perform these functions

by successfully having completed one of the following (check appropriate blocks):

( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode analog signals;

( ) B. A training course provided by the customer or authorized representative, using training materials and

instructions provided by the manufacturer/grantee of the equipment used to encode analog signals; or

( ) C. An independent training course (e.g., trade school or technical institution) recognized by the

manufacturer/grantee of the equipment used to encode analog signals; or

( ) D. In lieu of the preceding training requirements, the operator(s)/maintainer(s) is (are) under the control of a

supervisor trained in accordance with _________ (circle one) above.

I agree to provide ______________________ (telco’s name) with proper documentation to demonstrate compliance

with the information as provided in the preceding paragraph, if so requested.

_________________________________Signature

_________________________________Title

_________________________________ Date

Transcribed and sworn to before me

This ________ day of _______________, _______

_________________________________

Notary Public

My commission expires:

_________________________________

Total Access 850 System Manual Industry Canada Compliance Information

Industry Canada Compliance Information

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local

telecommunications company. The equipment must also be installed using an acceptable method of connection. In

some cases, the company's inside wiring associated with a single line individual service may be extended by means of

a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the

above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the

supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone

lines and internal metallic waterpipe system, if present, are connected together. This precaution may be particularly

important in rural areas.

The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a

telephone loop which is used by the device, to prevent overloading. The termination on a loop may consist of any

combination of devices subject only to the equipment that the total of the LNs of all devices does not exceed 100.

The ringer equivalence number (REN) assigned to each terminal adapter is used to determine the total number of

devices that may be connected to each circuit. The sum of the RENs from all devices in the circuit should not exceed

a total of 5.0.

Canadian Emissions Requirements

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in

the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of

Communications.

Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques de Class

A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques,” NMB-003 edictee par le ministre des

Communications.

The Industry Canada Certification label identifies certified equipment. This certification means that

the equipment meets certain telecommunications network protective, operational, and safety

requirements. The Department of Commerce does not guarantee the equipment will operate to the

user's satisfaction.

Users should not attempt to make such connections themselves, but should contact the

appropriate electric inspection authority, or an electrician, as appropriate.

Product Warranty Total Access 850 System Manual

Product Warranty

ADTRAN will repair and return this product within the warranty period if it does not meet its published

specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty.

Software Licensing Agreement

Each ADTRAN product contains a single license for ADTRAN supplied software. Pursuant to the Licensing

Agreement, you may: (a) use the software on the purchased ADTRAN device only and (b) keep a copy of the

software for backup purposes. This Agreement covers all software installed on the system as well as any software

available on the ADTRAN website. In addition, certain ADTRAN systems may contain specific conditions for

obtaining software upgrades. The full ADTRAN Software Licensing Agreement can be found at

www.adtran.com/licensing.

Product Registration

Registering your product helps ensure complete customer satisfaction. Please take time to register your products

online at www.adtran.com. Click Service and Support on the top of the page, and then click Product Registration

under Support.

Customer Service, Product Support Information, and Training

ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications

or fails while in service. Warranty information can be found at www.adtran.com/warranty.

A return material authorization (RMA) is required prior to returning equipment to ADTRAN. For service, RMA

requests, training, or more information, use the contact information given below.

Repair and Return

If you determine that a repair is needed, please contact our Customer and Product Service (CAPS) department to have

an RMA number issued. CAPS should also be contacted to obtain information regarding equipment currently in

house or possible fees associated with repair.

Identify the RMA number clearly on the package (below address), and return to the following address:

Pre-Sales Inquiries and Applications Support

Your reseller should serve as the first point of contact for support. If additional pre-sales support is needed, the

ADTRAN Support web site provides a variety of support services such as a searchable knowledge base, latest

product documentation, application briefs, case studies, and a link to submit a question to an Applications Engineer.

All of this, and more, is available at:

CaPS Department (256) 963-8722

ADTRAN Customer and Product Service

901 Explorer Blvd. (East Tower)

Huntsville, Alabama 35806

RMA # _____________

http://support.adtran.com

Autres manuels pour Total Access 850

Table des matières

Autres manuels ADTRAN Matériel réseau

ADTRAN

ADTRAN 401 1 GE Micro ONT Manuel utilisateur

ADTRAN

ADTRAN Dual Nx56/64 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 8044M Manuel utilisateur

ADTRAN

ADTRAN OC-12 Manuel utilisateur

ADTRAN

ADTRAN Total Access 351 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 6360 Manuel utilisateur

ADTRAN

ADTRAN SLC-5 U-BR1TE III Mode d’emploi

ADTRAN

ADTRAN 6540 Manuel du produit

ADTRAN

ADTRAN Total Access 3000 Manuel

ADTRAN

ADTRAN ATLAS 810 Plus Manuel utilisateur

ADTRAN

ADTRAN 850-VoDSL Manuel utilisateur

ADTRAN

ADTRAN NetVanta 2000 Series Manuel utilisateur

ADTRAN

ADTRAN 1442940G1 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1335 Series Manuel utilisateur

ADTRAN

ADTRAN NetVanta Analog Modem Dial Backup Interface... Manuel utilisateur

ADTRAN

ADTRAN 1442390G1 Manuel utilisateur

ADTRAN

ADTRAN 24-Port DSLAM Access Module IADSL Module Manuel utilisateur

ADTRAN

ADTRAN NetVanta Series Manuel utilisateur

ADTRAN

ADTRAN TSU ACE Manuel utilisateur

ADTRAN

ADTRAN T200 IDSL OCU-R Mode d’emploi

ADTRAN

ADTRAN TRACER 4106 Plan Guide de l'utilisateur

ADTRAN

ADTRAN SFP Series Manuel utilisateur

ADTRAN

ADTRAN 1202803L1 Manuel utilisateur

ADTRAN

ADTRAN ATM Mini-DSLAM Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur