ADTRAN NetVanta Analog Modem Dial Backup Interface... Manuel utilisateur

NETVANTA ANALOG MODEM DIAL BACKUP INTERFACE MODULE (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

• ITU V.90 Compliant

• Async

INSTALLATION INSTRUCTIONS

1. Remove power from the base unit.

2. If the Network Interface Module (NIM) is already in the

NetVanta chassis, release the pins at both edges of the

NIM faceplate and slide the module out of the chassis.

3. Carefully align the P1 connector on the NIM with the J1

connector on the analog modem DIM. Using only

fingertip pressure so that neither circuit board bends or

flexes, ensure that the connectors are firmly seated.

Secure the analog modem DIM to the NIM using the

screws and standoff posts supplied.

12 VDC

POWER

CONSOLE

LAN

SLOT 1 NET/D BU

WAN-DDS DBU

4. Slide the NIM with the analog modem DIM attached

into the NetVanta option slot until the NIM is firmly

seated against the back of the chassis.

5. Secure the pins at both edges of the NIM.

6. Connect the cables to the associated device(s).

7. Complete installation of the base unit.

8. Restore power to the base unit.

ANALOG MODEM DBU (RJ-48C) CONNECTION PINOUT

Pin Name Description

1-3 — Unused

4 R Network-Ring

5 T Network-Tip

6-8 — Unused

INSTALLATION INSTRUCTIONS (CONTINUED)

NETVANTA ANALOG MODEM DIAL BACKUP INTERFACE MODULE (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

alias <text>

Comment line to provide the text name assigned by the SNMP network management system.

caller-id override always <number>

Forces a replacement of the incoming caller ID number with the number given. The received

caller ID, if any, is discarded, and the given override number is used to connect the incoming

call to a circuit of the same number. Use no caller-id override (default) to disable any caller

ID overrides.

caller-id override if-no-CID <number>

Allows a replacement of the received caller ID number, but only if there is no caller ID

available on the incoming call. The received caller ID, if available, is used to connect the call.

However, if no caller ID is received, the given override number is used to connect the

incoming call to a circuit of the same number.

description <text>

Comment line to provide an identifier for this interface (for example, circuit ID, contact

information, etc.).

dialin

Enables the modem for remote console dialin disabling the use of the modem for dial-backup.

shutdown

Turns off the unit. The no version of this command turns the interface on and allows it to pass

data.

ANALOG MODEM DIAL BACKUP DIM COMMANDS

Table des matières

Autres manuels ADTRAN Matériel réseau

ADTRAN

ADTRAN DSU IV ESP Manuel utilisateur

ADTRAN

ADTRAN NetVanta 838 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1531 Series Manuel

ADTRAN

ADTRAN JOBAID T200 IDSL Manuel utilisateur

ADTRAN

ADTRAN NetVanta 2300 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 2000 Series Manuel utilisateur

ADTRAN

ADTRAN ISU 512 Manuel utilisateur

ADTRAN

ADTRAN ISU 512 Manuel utilisateur

ADTRAN

ADTRAN ISU 512E Manuel utilisateur

ADTRAN

ADTRAN T1 CSU ACE Manuel utilisateur

ADTRAN

ADTRAN Express 3100 Manuel utilisateur

ADTRAN

ADTRAN Total Access 1100F Manuel utilisateur

ADTRAN

ADTRAN DS3 NIU3 Manuel utilisateur

ADTRAN

ADTRAN Total Access DSLAM Octal SHDSL Manuel utilisateur

ADTRAN

ADTRAN TRACER 4106 Plan Guide de l'utilisateur

ADTRAN

ADTRAN Total Access 372 Manuel du produit

ADTRAN

ADTRAN DDS T200 Mode d’emploi

ADTRAN

ADTRAN NetVanta 1700801G1 Manuel utilisateur

ADTRAN

ADTRAN 1490 TX Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1335 Series Manuel utilisateur

ADTRAN

ADTRAN 1200221L1 Manuel utilisateur

ADTRAN

ADTRAN Total Access 1500 Total Reach DDS-DP Manuel du produit

ADTRAN

ADTRAN SFP Manuel utilisateur

ADTRAN

ADTRAN E1 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur