OPC8017 OPC8024 / OPD8017 OPD8024 10
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.1.6 Data, figures and modifications
All data, text and figures were prepared to the best of our knowledge. They do not represent any
assurance for the properties themselves. Despite taking utmost care, no liability can be assumed for
accuracy, completeness and actuality of the information. Subject to changes.
2.1.7 Trademarks
It is noted that any software and/or hardware trademarks and any company brand names mentioned
in this documentation are all subject to the general trademark protection rights.
StoraXe® and Big-LinX® are registered trademarks of ADS-TEC.
All other used third-party trademarks are hereby acknowledged.
In the case of trademark infringement, ADS-TEC reserves the right to exercise all rights.
2.1.8 Copyright
This instruction manual is protected by copyright. For the authorised user, simple usage rights are
granted within the scope of the intent of the contract. Any modified use or exploitation of the provided
content, particularly duplication, modification or publishing in whatever form is permitted only with the
prior consent of ADS-TEC.
In the case of copyright infringement, ADS-TEC reserves the right to exercise all rights.
2.1.9 Standards
The manufacturer hereby declares that the product described in this instruction manual complies with
all relevant stipulations of the following European directives:
•2011/65/EU, RoHs Directive
•2014/30/EU, EMC Directive
•2014/53/EU, RED Directive
•2014/35/EU, Low Voltage Directive
The product is a class B device.
Note: For full compliance with the EMC legislation, all components and cables used for device
connection must also be compliant with these requirements. It is therefore necessary to employ BUS
and LAN cables with shielded connectors and these must be installed as per the instructions
contained in the instruction manual.
