Adobe PHOTOSHOP CS2 Manuel utilisateur
Printing Images from Adobe Photoshop CS2
Adobe Photoshop is a powerful image editing program, and can be used to make high quality
prints from image files. This document is divided into two main sections: Photoshop Setup, and
Opening and Printing Images.
Photoshop Setup
One of the most important and least understood aspects of Photoshop involves properly setting
up its color management options. Figure 1 below shows a recommended Color Settings setup.
Figure 1
-2-
Opening and Printing Images
Open the image that you want to print in Photoshop. If the image contains an embedded profile
that differs from your Working Space, a dialog will be displayed asking whether you want to
convert the image to your Working Space. Generally, you should use the embedded profile.
This is shown in Figure 2 below.
Figure 2
If the image you are opening does not contain an embedded profile, a dialog will be displayed
asking what you want to do. If you know what color space the image is in, assign a profile,
either the working RGB (if it’s the same as your default working space shown here as sRGB), or
select a profile from the dropbox. If you don’t know what color space the image is in, select
Leave as is (don’t color manage). This is shown in Figure 3.
Figure 3
-3-
Now that your image is open in Photoshop, you can edit it as needed. Before printing the image,
you should check the size, to ensure that it will print at the desired size. To do this, select Image
| Image Size. A dialog will appear similar to the one shown in Figure 4. Make sure that the
Constrain Proportions and Resample Image: checkboxes are checked. Set the resolution to 300
pixels/inch if printing to a Kodak ML-500 or 9810, 301 pixels/inch if printing to a Kodak 1400,
or 314 pixels/inch if printing to a Kodak 8500 printer. Set either the Height or Width dimension
to the desired size. The other dimension will automatically change to maintain the correct
proportions. Once you have resized the image to the desired size, click on the OK button.
Figure 4
If you wish to “soft proof” (monitor preview) what your print will look like, you can use the
Proof Colors feature of Photoshop. To setup this feature, select Proof Setup from the View
menu. A dialog similar to the one shown in Figure 5 will appear. Select the profile for the
printer/media that you are using in the Profile: box. Set the Intent: to Perceptual, and check the
Black Point Compensation and Preview checkboxes. You can optionally check the Paper White
checkbox for a more accurate indication of the overall print contrast. Once you have setup the
parameters in the Proof Setup dialog, click on the Save button to save the proof setup values.
After saving, the named file will now appear near the bottom of the Proof Setup dialog. You can
now click on the name to apply the selected proofing setup. Once selected, you can toggle the
Proof Colors function by pressing Ctrl-Y. When the Proof Colors feature is enabled, the named
Proof Setup will appear in parentheses next to the filename as shown in Figure 6.
-4-
Figure 5
Figure 6
Photoshop interacts with the Windows and Macintosh operating systems differently. Therefore,
Windows and Macintosh will be discussed separately.
Windows 2000/XP
When you are ready to print the image, select Print with Preview from the File menu. A dialog
similar to the one shown in Figure 7 will appear. Select Color Management from the dropdown
box below near the left side of the dialog. Set the Print: to Document (the document color space
will be shown to the right). To color manage the printed output, set the Options, Color Handling
dropdown box to Let Printer Determine Colors. This will allow Windows ICM to color manage
the image data when it is sent to the printer driver. If you wish to turn off printer color
management, set the Color Handling: dropdown box to No Color Management. If you wish to
have Photoshop apply the printer ICM profile when sending the image data to the printer driver,
set the Color Handling: dropdown box to Let Photoshop Determine Colors, and select the ICM
profile that you wish to use in the Printer Profile: dropdown box. You can now specify the
Rendering Intent via the dropdown box below the profile name. Normally, you should select
-5-
Perceptual or Colorimetric for the rendering intent depending upon your need. Photoshop
interacts with Windows and turns off Windows ICM so that the profiles are not applied twice.
You are now ready to click on the Print… button to send the image to the printer driver for
printing on the selected printer.
Figure 7
Macintosh (OS 9.x/10.2.x)
When you are ready to print the image, select Print with Preview from the File menu. A dialog
similar to the one shown in Figure 8 will appear. Select Color Management from the dropdown
box near the left side of the dialog. Set the Print: to Document (the document color space will be
shown to the right). The Macintosh drivers (both OS 9 & 10) always apply the printer ICC
profiles when an image is printed. To color manage the printed output, set the Options, Color
-6-
Handling dropdown box to Let Printer Determine Colors Note that selecting No Color
Management will give the same results (since the printer ICC profile is always applied). If you
wish to apply the printer profile in Photoshop, you must first disable the printer color
management, or the print will be doubly color managed. Since the printer driver selects the
printer profile by means of the profile’s filename, the easiest way to disable the printer color
management is to rename the profile. I would suggest adding a number at the end of the profile
name. For example, you could rename the Kodak 1400 Glossy.icm profile to be Kodak 1400
Glossy1.icm. The profiles are embedded within one of the driver files (the filename varies
depending upon the printer model). Once you have disabled the printer color management, you
can then select the ICC profile that you wish to use in the Printer Profile: dropdown box. You
can now specify the Rendering Intent via the dropdown box below the profile name. Normally,
you should select Perceptual for the rendering intent.
You are now ready to click on the Print… button to send the image to the printer driver for
printing on the selected printer.
Figure 8 (OS X)
Autres manuels pour PHOTOSHOP CS2
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Adobe Logiciel
Adobe
Adobe 65030089 - Robohelp - PC Manuel utilisateur
Adobe
Adobe ACROBAT 3D Manuel utilisateur
Adobe
Adobe PRESENTER 7 Instructions d'installation et d'utilisation
Adobe
Adobe 65048332 Manuel utilisateur
Adobe
Adobe 38040334 - Dreamweaver CS3 Manuel utilisateur
Adobe
Adobe PREMIERE PRO 4.0 Guide de référence
Adobe
Adobe 65029121 - Flash Media Streaming Server Mode d’emploi
Adobe
Adobe 38039927 - Fireworks CS3 - PC Manuel de service
Adobe
Adobe 22020738 Guide de référence rapide
Adobe
Adobe 65009333 - InCopy CS4 - PC Mode d’emploi
Adobe
Adobe ACROBAT READER 7.0 Manuel utilisateur
Adobe
Adobe AUDITION 1.5 Manuel utilisateur
Adobe
Adobe 65021048 - Premiere Pro CS4 Manuel utilisateur
Adobe
Adobe GOLIVE CS2 Manuel
Adobe
Adobe 22011302 Manuel utilisateur
Adobe
Adobe ACROBAT COM Fiche technique
Adobe
Adobe 65008009 - After Effects CS4 Mode d’emploi
Adobe
Adobe 65009333 - InCopy CS4 - PC Manuel utilisateur
Adobe
Adobe GOLIVE CS2 Manuel utilisateur
Adobe
Adobe 17510676 - InDesign CS PageMaker Edition Manuel utilisateur
Manuels Logiciel populaires d'autres marques
Canon
Canon Vixia HF21 Manuel utilisateur
Canon
Canon ZR950 Manuel utilisateur
Samsung
Samsung Auto Backup Manuel utilisateur
Polycom
Polycom Vortex EF2201 Instructions d'installation et d'utilisation
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuel utilisateur
Novell
Novell SP2 - S Mode d’emploi