ADLINK Technology CSA-7400 Manuel utilisateur
Leading EDGE COMPUTING
CSA-7400
4U Rackmount Network Appliance
with Dual Intel® Xeon® Processor CPU Sleds &
Intel® Ethernet Multi-Host Controller Switch Sleds
User’s Manual
Manual Revision: 1.1
Revision Date: October 23, 2018
Part No.: 50-1Z240-2010
2
CSA-7400
Preface
Copyright 2018 ADLINK Technology, Inc.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or other
means in any form without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior notice in order to improve
reliability, design, and function and does not represent a commitment on the part of the
manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the European
Union's Restriction of Hazardous Substances (RoHS) directive and
Waste Electrical and Electronic Equipment (WEEE) directive.
Environmental protection is a top priority for ADLINK. We have enforced
measures to ensure that our products, manufacturing processes,
components, and raw materials have as little impact on the environment
as possible. When products are at their end of life, our customers are
encouraged to dispose of them in accordance with the product disposal and/or recovery
programs prescribed by their nation or company.
Battery Labels (for products with battery)
ᑜ㔚ᳰ⺧࿁ᡴ
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including acrylamide,
arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-
Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials,
which are known to the State of California to cause cancer, and acrylamide, benzene,
cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl
materials, which are known to the State of California to cause birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
Trademarks
Product names mentioned herein are used for identification purposes only and may be
trademarks and/or registered trademarks of their respective companies.
3
CSA-7400
Revision History
Revision Release Date Description of Change(s)
1.0 2018-03-22 Initial release
1.1 2018-10-23 Move CPU and switch sled content to separate
manuals; add rackmount warnings
4
CSA-7400
Table of Contents
Preface .................................................................................................................................. 2
Table of Contents.................................................................................................................. 4
1Overview .......................................................................................................................... 5
1.1 Introduction ............................................................................................................................. 5
1.2 CSA-7400 System Architecture .............................................................................................. 6
1.3 CSA-7400 Mechanical Overview ............................................................................................ 8
1.3.1 Front Panel.........................................................................................................................................8
1.3.2 Rear Panel .........................................................................................................................................8
1.4 CSA-7400 Mechanical Dimensions ........................................................................................ 9
1.5 Package Contents................................................................................................................. 10
2Specifications .................................................................................................................11
2.1 Chassis Module List...............................................................................................................11
2.2 Fan Modules ..........................................................................................................................11
2.3 PSU Modules.........................................................................................................................11
2.4 Environmental....................................................................................................................... 12
3Assembling and powering up CSA-7400..................................................................... 13
3.1 Inserting and Removing the CPU Sled ................................................................................. 13
3.2 Inserting and Removing the Switch Sled .............................................................................. 17
3.3 Routing the VGA Cable on switch sled ................................................................................ 19
3.4 Connecting Power Cords to the CSA-7400 .......................................................................... 20
3.5 Powering Up the CSA-7400.................................................................................................. 20
4Maintenance................................................................................................................... 21
4.1 Hot-Swapping the CPU Sled................................................................................................. 21
4.2 Hot-Swapping the Switch Sled.............................................................................................. 21
4.3 Removing and Replacing a Fan Module............................................................................... 22
4.4 Removing and Replacing a PSU .......................................................................................... 23
5Remote Management via CMM..................................................................................... 24
5.1 IPMI Topology ....................................................................................................................... 25
5.2 Configuring the CMM IP Address.......................................................................................... 26
5.3 Using IPMItool....................................................................................................................... 31
5.4 Using the Web UI.................................................................................................................. 32
5.5 Updating the CMM Firmware................................................................................................ 39
Safety Instructions ............................................................................................................. 42
Consignes de Sécurité Importantes ................................................................................. 44
Getting Service ................................................................................................................... 46
5
CSA-7400
1 Overview
1.1 Introduction
The ADLINK CSA-7400 is a high-performance high-density computing platform supporting
four dual Intel® Xeon® Processor E5 CPU sleds or dual Intel® Xeon® Scalable Processor
CPU sleds, interconnected by dual redundant switch sleds. The CSA-7400 can ensure
uninterrupted service delivery through hot-swappable CPU and switch sleds. It is ideally
suited for building next generation high-performance firewalls and virtualized telecom
elements.
The main features of the CSA-7400 are summarized as follows:
xSupports four single-system dual Xeon® Processor E5 CPU sleds (MCN-2600T) or
dual Intel® Xeon® Scalable Processor CPU sleds (MCN-2610T)
xDual redundant switch sleds provide up to 2x 50G data plane links to each CPU sled,
and 360G (MXN-3610) or 400G (MXN-4100) uplinks
xIndependent 1G control plane links that connect four CPU sleds, two switch
management CPUs (implemented by COM Express modules) and two Chassis
Management Modules (CMM)
xSupports IPMI 2.0 specification, provides web-based intelligent system management,
and supports SOL on compute nodes
xFour redundant hot-swappable power supply units provide active power management
on compute nodes and support flexible power limit polices
xIntegrates ADLINK PacketManager software to provide common Layer 2 and Layer 3
switch stacks, RPC interface, CLI.
xOptionally integrates Wind River® Titanium Server or OPNFV software to provide
carrier grade NFV service
6
CSA-7400
1.2 System Architecture
7
CSA-7400
CSA-7400 includes four CPU sleds (MCN-2600T or MCN-2610T) and two switch sleds
(MXN-3610 or MXN-4100). Each CPU sled has two PCIe x8 Gen3 interfaces (providing up to
2x50G Ethernet bandwidth) that are routed to two switch sleds, respectively.
Each switch sled is connected to four CPU sleds via four PCIe x8 Gen3 interfaces, and they
provide a maximum of 36x10G or 4x100G Ethernet ports for external communication. Of the
36x10G Ethernet ports, 20x10G are provided on the MXN-3610 front panel directly, and the
other 16x10G Ethernet ports are provided via a NIM-1610 switch IO card. Alternatively, the
NIM-1610 can be replaced with a NIM-0440 providing 4x40G Ethernet ports.
In addition, there is a Microsemi® VSC7512 GbE switch on the MXN-3610/MXN-4100 switch
sleds to provide an independent 1G control plane between the four compute switch sleds, as
well as two switch management COMe modules and two CMMs.
8
CSA-7400
1.3 Mechanical Overview
1.3.1 Front Panel
NIM-1610/NIM-0440
MXN-3610/MXN-4100
MCN-2600T/MCN-2610T
1.3.2 Rear Panel
9
CSA-7400
1.4 Mechanical Dimensions
482.60
437.80
599
31.06 21
174.30
Dimensions in mm
10
CSA-7400
1.5 Package Contents
Before opening, please check the shipping carton for any damage. If the shipping carton and
contents are damaged, notify the dealer for a replacement. Retain the shipping carton and
packing material for inspection by the dealer. Obtain authorization before returning any
product to ADLINK.
Check that the following items are included in the package. If there are any missing items,
contact your dealer:
xCSA-7400 Rackmount Network Appliance
xPackage check list
xUSB console cable
xVGA cable for switch sled
Autres manuels pour CSA-7400
1
Table des matières
Autres manuels ADLINK Technology Matériel réseau
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
