13. Battery Lock Button
Use to lock/unlock the battery pack
14. Earphone/ Data Cable Jack
Connects an earphone; or connects a data cable for PC software
programming.
15. Li-ion Battery Pack
Supply the power to the transceiver.
Keypa Description
Key What You Operate
1 SQL In VFO/MR/CH mode, press [F]+[1] key to adjust the
squelch level.
2 LOW In VFO/MR mode, press [F]+[2] key to switch between
the high/low power output level.
3 SCAN In VFO/MR/CH mode, press [F]+[3] key to activate
scanning of frequencies and memory channels.
4 STEP In VFO mode, press [F]+[4] key to select the channel
step size as follows:
- 5.00, 6.25, 10.00, 12.50, 25.00 KHz.
5 REV In MR mode, press [F]+[5] key to switch reverse function
O /OFF. If you want to switch this function O , you have
to set offset frequency in VFO mode and save the
settings as memory channel.
6 RSQT In VFO/MR mode, press [F] + [6] key to set receiving
with CTCSS/DCS.
7 VGL In VFO/MR/CH mode, press [F]+[7] key to adjust VOX
level.
8 ASY In VFO mode, press [F]+[8] key to set offset direction &
frequency.
9 TSQT 1) In VFO/MR model, press [F]+[9] key to set transmitting
with CTCSS/DCS.
2) In MR/CH model, press [9]+Power On to show/no
show memory channel name.
0 LCK In MR mode, press [F]+[0] key to lock/unlock memory
channel when scan.
* V/M 1)In VFO/MR mode, press [V/M] key to change the
transceiver working mode between VFO and MR mode.
2)In VFO mode, press [F]+[V/M] key to save memory
channel.
3)Press [V/M]+Power On to change the transceiver
working mode between VFO and CH mode.
# VOX In VFO/MR mode, press [F]+[# VOX] key to switch VOX
function O /OFF.
