ADGT GLC Series Manuel utilisateur

ADGT 4G

GLC Router Series

User Guide

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

ADGT 4G GLC Router Series

User Guide (Ver. 2.0 | 2021-09-08)

The Manual is intended for persons who install, configure and maintain industrial ADGT 4G GLC Routers Series

(hereinafter referred to as routers). The manual contains information about the purpose, design, technical

parameters and operating principles of the routers.

ADGT systems s.r.o. reserves the right, without any prior notice, to make changes to the User Guide, related to

the improvements of hardware and software, as well as to eliminate typos and inaccuracies.

This document is the property of ADGT systems s.r.o.

Printing allowed for private use only.

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

Content

Chapter 1. Product Overview .................................................................................................................. 4

Field of application ................................................................................................................................................................. 4

Hardware overview................................................................................................................................................................. 5

MicroFit connector.................................................................................................................................................................. 6

RESET button............................................................................................................................................................................. 6

LED indicators ........................................................................................................................................................................... 6

Specifications ............................................................................................................................................................................ 7

Chapter 2. Getting started....................................................................................................................... 8

Installation and connection................................................................................................................................................. 8

Default settings ........................................................................................................................................................................ 8

Configuring the network adapter (Windows 10) ........................................................................................................ 9

Connecting to web interface.............................................................................................................................................11

Accessing the web interface with HTTPS (uHTTPd) .................................................................................................13

Chapter 3. Change router settings using Web interface..................................................................... 14

Configure Local Area Network (LAN) ............................................................................................................................14

Setting up a mobile connection (WAN)........................................................................................................................17

USB-modem mode (RNDIS)..............................................................................................................................................18

Static routing...........................................................................................................................................................................22

Chapter 4. Router administration ......................................................................................................... 23

SIM card manager.................................................................................................................................................................23

Ping Control.............................................................................................................................................................................25

Remote SMS Control............................................................................................................................................................26

Managing router using SSH..............................................................................................................................................29

Firmware upgrade.................................................................................................................................................................30

Reboot .......................................................................................................................................................................................31

Factory reset ............................................................................................................................................................................32

Network Diagnostics............................................................................................................................................................33

Scheduled tasks......................................................................................................................................................................34

Terminal (command line) in web interface ..................................................................................................................35

Changing Access Point Name (APN)..............................................................................................................................35

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

Chapter 1. Product Overview

Field of application

ADGT GLC is a 4G mobile router for wireless connection

of commercial and industrial facilities to the Internet. The

router is equipped with a built-in LTE modem providing

secure Internet access (up to 150 Mbps) at any point of a

cellular operator's network coverage for remote sites

including industrial facilities, vehicles, ATMs, POS

terminals, etc.

GLC has a chipset with integrated processor and LTE-

module, which provides lower power consumption, fast-

speed interaction between components and low cost of

the device.

GLC series includes the following router models:

GLC40 – 4G router LTE modem speed up to 150 Mbps

GLC40-G – 4G LTE router with GPS module for location determination and high-accuracy time

synchronization with GPS systems

Key features

•1 x Ethernet 10/100 Mbps (LAN/WAN)

•Passive PoE-In support

•2 x SIM card slots for channel redundancy

•1 x USB mini B

•2 x SMA connectors for 4G antennas

•Operating temperatures range -40…+60°C

•Watchdog timer for router reboot in case of software failures

•Open Wrt open-source operating system, providing wide range of capabilities for creating secure

VPN networks

•Networking: OpenVPN, IPsec, NAT, Firewall, SNMP, GRE, PPTP, L2TP, PPPoE, DHCP (server/client),

Collectd, etc.

•DIN rail and wall mountable

Fig. 1. GLC 4G Router.

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

Hardware overview

The router is equipped with an IP30 metal case. See table below for a description of buttons and

connectors.

Table. 1. ADGT GLC. Buttons and connectors of the router

Button/connector

Description

Front side

ETH/POE

Ethernet (LAN/WAN 10/100 Mbit/s), RJ-45

USB

USB mini-B

3-1

SIM

SIM card rejection button

3-2

SIM

SIM card tray

LED

PWR

Power LED

NET

4G/3G connection LED

ACT

4G/3G data transfer LED

GNSS

SMA(f) connector for GPS-antenna (for models with GPS)

RESET

Reboot / factory reset settings

Rear side

ANT DIV

SMA(f) connector for 4G DIV antenna

POWER

MicroFit 4-Pin 10-30VDC power connector

ANT MAIN

SMA(f) connector for 4G MAIN antenna

Router ground screw

Fig. 2. Front and rear sides of the router.

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

MicroFit connector

The router is powered via a 4-pin MicroFit connector. See Table 2 for connector pinouts description.

Table. 2. MicroFit connector pins.

RESET button

Factory reset device is used to hardware reboot the router and reset it to factory default settings.

Table. 3. Reboot or factory reset using RESET button.

Table. 4. LED descriptions.

LED indicators

There are 3 LED indicators on the router’s

front side:

•PWR — power LED.

•NET — 3G (4G) connection LED.

•ACT — 3G (4G) data transfer LED.

Table 4 describes the LED modes.

Signal

Description

Not used

Ground

External power supply

positive input.

Overvoltage and polarity

reversal protection

Function

Actions

Reboot

Press RESET button. All LEDs turns off except PWR. After 5-7 seconds, NET and ACT LEDs flash

once and the process of device registration in the 4G network begins.

Factory reset

Press and hold the RESET button for 10 seconds — NET and ACT LEDs start flashing

simultaneously. Release the button after NET and ACT LEDs stop flashing.

LED

Function

Status

Description

PWR

Power

Power on

OFF

Power off

NET

4G/3G

connection

4G/3G connection established

OFF

4G/3G network registration

failed

ACT

4G/3G data

transfer

Flashing

4G/3G data transfer in progress

Fig. 3. MicroFit connector.

Fig. 4. Reset button.

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

Specifications

The table shows the specifications of GLC model range.

Table. 5. GLC router specifications.

Parameter

Description

GLC40

GLC40-G

CELLULAR NETWORK

Frequency Range

FDD-LTE B1/B3/B5/B7/B8/B20, UMTS/HSPA+ B1/B5/B8, GSM/GPRS/EDGE B3/B8

Rate (DL/UL)

150 Mbps / 50 Mbps

GNSS Receiver

—

CPU

Chipset Platform

Qualcomm MDM9607

Application Core

ARM® Cortex-A7 (1.3GHz)

Telecom Core

QDSP6

RAM memory

40 Mb

Flash memory

40 Mb

INTERFACES AND CONNECTORS

Ethernet

1 x RJ-45 10/100Base-TX (LAN/WAN)

USB2.0

1 x USB mini B, Device mode

SIM

2 x Nano-SIM (4xFF)

4G antenna connector

2 x SMA(f)

GPS antenna connector

—

1 x SMA(f)

SOFTWARE & NETWORKING

Operating System

OpenWrt-based

Network Services

NAT, Firewall, OpenVPN, IPSec, TinyProxy, GRE, PPTP, PPPoE, DHCP

(server/client), SNMP, Collectd

Management

LuCI Web interface, SSH, Telnet

POWER

Source

DC 10 ~ 30 V (MicroFit 4-pin, Passive PoE-In)

Consumption

10 W

MECHANICAL & ENVIRONMENTAL

Dimensions (L x W x H)

70 x 67 x 36 mm

Weight

125 (±5) gr

Enclosure

Aluminum alloy (IP30)

Mounting

DIN rail, wall, table rubber feet

Operating temperature

-40...+60°C

Warranty

2 years

Relative Humidity

up to 90% at 20°C temperature

Average Service Life

10 years

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

Chapter 2. Getting started

Installation and connection

1. SIM card installation

Disable PIN code check before installing SIM cards. If PIN check is active, you can enter it in Web interface

menu Network  Interfaces  INTERNET  Edit  PIN.

Use a SIM ejection tool to eject SIM card tray, install SIM card (-s) and insert the tray into SIM card slot

until you hear a click.

2. Antennas connection

•Connect 4G antennas to ANT MAIN and ANT DIV connectors.

•If necessary, connect GPS to GNSS connector.

Check the antenna’s frequency range to ensure stable and fast connection.

3. Connecting to PC

Connect the router to a PC using ETH/POW 10-30 VDC connector.

4. Power

Connect the power to the router via a 4-pin MicroFit POWER connector (see Table 2). The power LED

PWR on the front side of the router will light up. The LEDs NET and ACT will flash on and off

simultaneously for 0.5 sec as the router performs initialization.

5. Router installation

Mount the router using the supplied brackets. The router can be placed horizontally on a flat surface,

mounted on a wall or mounted on a DIN rail depending on its modification (see the label on the case).

Default settings

GLC routers are supplied with basic factory settings. These settings can be modified without prior notice.

Table. 6. GLC factory settings.

Interface

Parameter

Description

Default network

configuration

ETH

LAN (eth0) 192.168.88.1/255.255.255.0

RMNET

WAN

LAN (ETH)

IP-address

192.168.88.1

Mask

255.255.255.0

root

Password

root

DHCP-server

active (IP-range: 192.168.88.100 - 192.168.88.250)

WAN

Connection name

rmnet_data0

Protocol

RMNET Cellular

APN

Internet

USB 2.0

Device mode as default

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

Configuring the network adapter (Windows 10)

Configuring the network adapter is described using Windows 10 as an example.

1. Insert the Ethernet cable into the ETH/POE port of the router and an available Ethernet port on the

network adapter of the PC.

2. In Windows 10, click Start  Settings  Network and Internet.

3. Enter Change adapter settings.

4. Right-click network adapter of the router and then choose Properties.

Fig. 5. Menu "Change adapter options".

Fig. 6. Ethernet adapter properties.

ADGT 4G GLC Router Series

User Guide v. 2.0 | 2021-09-08

5. In the opened window, click Properties or

double-click Internet Protocol Version 4

(TCP/ IPv4) to set IP-address and DNS

server.

6. There are 2 options for TCP/IPv4 connection:

Option 1: Choose Obtain an IP address

automatically. DHCP server is active in the

router by default, and it automatically

assigns a dynamic IP address to PC network

adapter.

Fig. 7. Internet Protocol version 4 (TCP/IPv4).

Fig. 8. Obtain an IP address automatically.

Table des matières

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur