ADEMCO VIA-30PSE Manuel utilisateur

For a detailed review of the entire system, please view the Ademco Via –30PSE system manual.

Arm and Disarm

Arm:

To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].

To arm in AWAY mode when you are leaving the premises, enter your [security code] + [AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX].

Disarm:

To disarm, enter your [security code] + [OFF].

Battery

The Ademco Via 30PSE operates on a UB 1270 battery.

Quick Guide: Ademco Via-30PSE

Loss of AC power and use of backup battery power is indicated by NO AC. or AC LOSS.

A low battery condition is indicated by BAT or SYSTEM LO BAT

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number].

To unbypass a zone, disarm the system.

Change Time and Date

To change date and time settings, enter your [security code] + [#] + [6] + [3].

Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.

Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.

Press [1] for PM or [2] for AM.

Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.

To exit, press [*] when the cursor is on the last digit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, enter your [security code] + [CHIME].

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the alarm

event history.

Security Codes

Your system allows for additional users, however only the Master user can assign user codes to users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three seconds

for the keypad to verify.

Trouble Conditions

Trouble conditions are issues that require your attention and are indicated on your panel’s display by the

word CHECK + zone number and accompanied by beeping from the touchpad.

To silence Trouble Conditions beeping, check that the zone’s protected areas are closed and secure.

For wireless sensors, check that no environmental changes have blocked the wireless sensor.

If the problem is corrected, enter your [security code] + [OFF] sequence twice.

For a list of Trouble Conditions other than CHECK, please see your Ademco Via –30PSE system manual.

Autres manuels pour VIA-30PSE

Table des matières

Autres manuels ADEMCO Système de sécurité

ADEMCO

ADEMCO VIA-30PSE Manuel utilisateur

ADEMCO

ADEMCO 4160-12 C-COM Manuel utilisateur

ADEMCO

ADEMCO VISTA-32FB Instructions de montage

ADEMCO

ADEMCO Security System VISTA-15 Instructions de montage

ADEMCO

ADEMCO 4130XM Manuel utilisateur

ADEMCO

ADEMCO LYNX Manuel utilisateur

ADEMCO

ADEMCO Security System VISTA-10SE Mode d'emploi

ADEMCO

ADEMCO VISTA-20SE Manuel du propriétaire

ADEMCO

ADEMCO 4110 Manuel utilisateur

ADEMCO

ADEMCO Vista 4140XMPT Manuel utilisateur

ADEMCO

ADEMCO 5120XM Manuel utilisateur

ADEMCO

ADEMCO VISTA-32FB Manuel utilisateur

ADEMCO

ADEMCO 4180 Manuel utilisateur

ADEMCO

ADEMCO Vista-10P Instructions de montage

ADEMCO

ADEMCO Vista AT Manuel utilisateur

ADEMCO

ADEMCO 4140XMPT2 Manuel utilisateur

ADEMCO

ADEMCO LYNXR Manuel du propriétaire

ADEMCO

ADEMCO VISTA-20SE Manuel utilisateur

ADEMCO

ADEMCO Defender II Manuel utilisateur

ADEMCO

ADEMCO RapidEye plus Instructions de montage

ADEMCO

ADEMCO VISTA-128B Manuel utilisateur

ADEMCO

ADEMCO VISTA-32FB Mode d'emploi

ADEMCO

ADEMCO N7227V5 Manuel utilisateur

ADEMCO

ADEMCO LYNXR-EN Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur