ADDC SR10-FDD Manuel utilisateur

User Guide

SR10-FDD

Version 1.0 ● 09 February 2021

Arnouse Digital Devices Corp.

1983 Marcus Ave, Suite 104

Lake Success, NY 11042

(516)673-4444

www.addc.net

Revision Notes

V1.0 Revision 1.0 was published in December 2020

Arnouse Digital Devices User Guide

SR10-FDD Version 1.0

Page 3 of 26

Arnouse Digital Devices Corp. 1983 Marcus Ave, Suite 104, Lake Success, NY 11042

(516)673-4444, www.addc.net

Trademarks

SR10-FDD and BioDigitalPC®are registered trademarks of Arnouse Digital Devices Corp. All other

trademarks or registered trademarks are the property of their respective owners.

Disclaimer

The information provided in this document is provided "as is" without warranty of any kind. ADDC

disclaims all warranties, either express or implied, including the warranties of merchantability and

fitness for a particular purpose. In no event shall ADDC be liable for any damages whatsoever

including direct, indirect, incidental, consequential, loss of business profits or special damages, even if

ADDC or its suppliers have been advised of the possibility of such damages.

Document Lifetime

ADDC may occasionally update online documentation between releases of the related hardware and

software. Consequently, if this document was not downloaded recently, it may not contain the most

up-to-date information. Please refer to www.addc.net for the most current information.

From the Web site, you may also download and refresh this document if it has been updated, as

indicated by a change in this date: 20 December 2020.

Where to get help

ADDC support, product, and licensing information can be obtained as follows.

Product information — Documentation, release notes, software updates, and information about

ADDC products, licensing, and service, are at ADDC website at:

http://wwwaddc.net

Technical support — Go to http://www.addc.net and select Support. On the Support page, you will

see several options, including one for making a service request. Note that to open a service request,

you must have a valid support agreement.

Your comments

Your suggestions will help us continue to improve the accuracy, organization, and overall quality of the

user publications. Please send your opinion of this document to:

Documentation@addc.net

If you have issues, comments, or questions about specific information or procedures, please include

the title and, if available, the part number, the revision, the page numbers, and any other details that

will help us locate the subject that you are addressing.

Arnouse Digital Devices User GuideSR10-FDD User Guide-V1.0_12-21-2020.docx

SR10-FDD Version 1.0

Table of Contents

1Introduction ............................................................................................................ 6

1.1 Purpose …...……………………………………………………………………………………… 5

1.2 Scope ……...……………………………………………………………………………………... 5

1.3 System Organization ……………………………………………………………………………. 5

2System Description ................................................................................................ 7

2.1 Key Features.......................................................................................................... 7

2.2 System Inventory.................................................................................................... 7

2.3 Environment ......................................................................................................... 10

2.4 System Operations............................................................................................... 10

3Installing, Starting and Stopping the System........................................................ 11

3.1 Installing the System ............................................................................................ 11

3.2 Installing the SR10-FDD Into a Rack.................................................................... 11

3.3 Installing System Components............................................................................. 11

3.4 Networking the System ........................................................................................ 17

4Step by Step Operating Instructions..................................................................... 19

4.1 SR10-FDD Overview............................................................................................ 19

4.2 SR10 Modules...................................................................................................... 20

5ROMWare Lite Software ...................................................................................... 22

5.1 Login .................................................................................................................... 22

5.2 Main Web GUI Screen Overview.......................................................................... 22

5.3 PC Card Power Control and Monitoring ............................................................... 22

5.4 Front Panel Touchscreen Overview ..................................................................... 22

Arnouse Digital Devices User Guide

SR10-FDD Version 1.0

Page 5 of 26

List of Figures

Figure 1- SR10-FDD System Block Diagram .................................................................. 7

Figure 2- SR10-FDD Chassis.......................................................................................... 9

Figure 3- Cable Management Arm .................................................................................. 9

Figure 4- 10Gbps SFP+ Cables ...................................................................................... 9

Figure 5- AC Power Cord ................................................................................................ 9

Figure 6- AC/DC Power Supply....................................................................................... 9

Figure 7- BioDigitalPC®................................................................................................... 9

Figure 8- SR10-FDD Rear Panel .................................................................................. 12

Figure 9- PC Card Fully Inserted and Locked ............................................................... 12

Figure 10- PC Card Track Setup................................................................................... 12

Figure 11- PC Card Track ............................................................................................. 13

Figure 12- PC Card Locking Mechanism....................................................................... 13

Figure 13- SR10 PC Card Unlocking............................................................................. 14

Figure 14- SR10 PC Card Ejection................................................................................ 14

Figure 15- PC Card ejection lever position.................................................................... 16

Figure 16- KVM PCB Stack Modules ............................................................................ 16

Figure 17- KVM PCB Power Cable ............................................................................... 16

Figure 18- SR10-FDD AC/DC Power Supply ................................................................ 16

Figure 19- SR10-FDD Switch Management Ports......................................................... 17

Figure 20- SR10-FDD Ethernet Networking Ports......................................................... 17

Figure 21- SR10-FDD Ethernet Networking Ports (Recommended Configuration)....... 18

Figure 22- SR10-FDD Front Panel................................................................................ 18

Figure 23- SR10-FDD Front Panel Controls and Indicators .......................................... 19

Figure 24- SR10-FDD Rear Panel Connections............................................................ 19

Figure 25- SR10 Block Diagram.................................................................................... 20

Figure 26- SR10-FDD Front Panel................................................................................ 21

Arnouse Digital Devices User GuideSR10-FDD User Guide-V1.0_12-21-2020.docx

SR10-FDD Version 1.0

1Introduction

1.1 Purpose

The purpose of this document is to define the functionality, operation, and maintenance of the

SR10-FDD Data Center. This document serves as the sole reference for the system

functionality at time of delivery. Any change to the Functional Specifications will require

agreement via the change control process between the user and ADDC. The SR10-FDD was

designed to provide long range (up to 24 km) remote operation via fiber optic cable KVM of up

to 10 BioDigitalPC®computers.

1.2 Scope

Summarize the purpose and contents of this guide and describe any security or privacy

considerations associated with its use.

This guide has 3 main sections, system functional specifications, operation, and maintenance.

The maintenance section requires that only qualified technicians gain access to the internal

components of the system. The system’s power management controls via the front panel touch

screen or the ROMWare GUI are PIN and password protected for security.

1.3 System Organization

Figure 1 is the block diagram for the SR10-FDD system. The system consists of the following

main components:

• SR10 Module

• AC-DC 12V Power Supply (main power source for SR10 Module and fans)

• DC-DC 12V-5V Converter (power for all KVM modules)

• ROMWARE Lite Module (provides remote power control of each individual PC Card)

• ROMWARE Lite Software (provides touch screen control and/or web GUI remote power

control)

Arnouse Digital Devices User Guide

SR10-FDD Version 1.0

Page 7 of 26

Figure 1- SR10-FDD System Block Diagram

Arnouse Digital Devices User GuideSR10-FDD User Guide-V1.0_12-21-2020.docx

SR10-FDD Version 1.0

2System Description

The SR10-FDD combines the power of the ADDC SR10 module with the Made in the USA, long

distance, fiber KVM (Keyboard, Video, Mouse) terminal for extraordinary capability. The SR10

module specifically designed to be integrated into a SR10-FDD features 10 separate and

distinct computers with USB and video delivered through fiber KVM. Each computer is

connected to a high-speed layer 2 managed switch through 3 physical 1 GbE NICs. The

embedded switch manages the individual NICs and has two 10G SFP+ trunk ports. Serial and

HTTP based switch management is included. Individual auto and remote computer power

control.

2.1 Key Features

The SR10-FDD System provides the following key features:

•10 Separate BioDigitalPC®Cards that can be easily remove and replaced for ease of

maintenance and upgradeability.

•Remote power control for each individual PC Card via a web GUI to allow remote

resetting of the PC Card.

•Each PC Card has its own KVM over fiber adapter to allow an additional remote

operation of the PC Card and its software applications.

2.2 System Inventory

The SR10-FDD system ships with the following components:

•SR10-FDD Chassis (Figure 2)

•1 each Cable Management Arm (Figure 3)

•2 each 10Gbps SFP+ Cables (Figure 4)

•1 each AC power Cord (Figure 5)

•1 each AC/DC Power Supply (Figure 6)

•BioDigitalPC®Cards (Check Invoice for Quantity) (Figure 7)

Arnouse Digital Devices User Guide

SR10-FDD Version 1.0

Page 9 of 26

Figure 2- SR10-FDD Chassis

Figure 3- Cable Management Arm

Figure 4- 10Gbps SFP+ Cables

Figure 5- AC Power Cord

Figure 6- AC/DC Power Supply

Figure 7- BioDigitalPC

Arnouse Digital Devices User GuideSR10-FDD User Guide-V1.0_12-21-2020.docx

SR10-FDD Version 1.0

2.3 Environment

The system is intended to be used in an environmentally controlled and secured facility. The

following system components are required for installation and remote-control operation.

•Rack Slides (not provided)

•Remote KVM Transceiver Unit (purchased separately)

•Fiber Optic cable (length determined by the end user)

•Laptop or PC with an Ethernet NIC for Remote Control Operation

•Laptop or PC with a Serial Communications Port for Switch Management

•Routers with 10G SFP+ Port

2.4 System Operations

The SR10-FDD can operate unattended once is properly installed and configured for remote

KVM operation. The remote users can have as much control of each PC Card as allowed by the

system administrator. Each user may be able to login and logout of the PC Card and operate

applications also as allowed by the System Administrator. However, System power controls and

switch management functions are not available to the user and must be accomplished from a

PC or laptop connected to the power and switch management ports on the rear panel of the

unit. These functions are password protected and available only to the System Administrator.

Table des matières

Autres manuels ADDC Stockage

ADDC

ADDC MDC-SR10-V2 Manuel utilisateur

ADDC

ADDC MOBYL DATA CENTER Manuel utilisateur

ADDC

ADDC SR20-FDD Manuel utilisateur

ADDC

ADDC SR-20RM Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur