ADB P.DG A4001N Manuel utilisateur

P.DG A4001N

User Manual

mation. No part of thisdocument may becopied,reprinted or reproduced in any material form or electronically, whether wholly

or in part, and no information contained herein may be usedor disclosed to third parties unless under aprevious written agree-

ment withADBBroadbandS.p.Asetting forth relevant termsandconditions.

Trademarks:

All termsused in this document that are known to be trademarksorservicemarks havebeen noted assuch.ADBcannot attest

to the accuracy of this information.Other product and corporate namesused in this document that may be trademarks or ser-

vicemarksof othercompaniesareusedonly forexplanation and to the owner’s benefit, without intent to infringe.Useofa term

in thisdocument shouldnot be regardedasaffecting thevalidity of any trademarkorservice mark.

This publication is subject to change without notice.ADB reserves the right to make changes to equipment designand system

components as well as system documentation and literature as progress in engineering, manufacturing methods, or other cir-

cumstancesmay warrant.

This publication isintended solely for informationaland instructionalpurposes.Refer to theaboveas to its possible uses.It con-

stitutes neither a contract with the user hereof nor a warranty or guarantee with regard to any of the ADB products described

herein norshall it beconstrued to grant a license or any other rights under any proprietary rights to information or material in-

cluded herein.ADBherebyexpressly disclaimsany warranty or guarantee,whether expressor implied, with regard to itemsde-

scribed herein. Any contract, license, or warranty between ADB and the user hereof is created solely by separate legal docu-

ments.

Home Station ADSL ADB P.DG A4001N

CONTENTS

Welcome 1

About this Guide 1

Naming Convention 1

Conventions 1

Procedures 3

How to change Access Password 3

How to open ports 4

How to Upgrade the Firmware 6

How to how to configure the ADSL line addessing >> static with RFC1483 7

How to how to configure the ADSL line addessing >> dinamic with PPPoE 12

How to configure the LAN access 17

Welcome 1

Welcome

ABOUT THIS GUIDE This guide describes the most relevant user procedures for the Home Station ADSL

ADB P.DG A4001N. This guide is intended for use by those responsible for support-

ing the installation and setup of network equipment; consequently, it assumes a

basic working knowledge of LANs (LocalArea Networks) and Internet Routers.

NAMING CONVENTION Throughout this guide, the P.DG A4001N

Category 5 Ethernet Cables are referred to as Ethernet Cables throughout this guide.

CONVENTIONS Table 1 andTable 2 listconventions that areused throughout this guide.

TABLE 1. Notice Icons

Icon

Notice Type

Description

Information note

Information that describes important features or instruc-

tions.

Caution

Information that alerts you to potential loss of data or po-

tentialdamagetoan application,system,ordevice.

HomeStation ADSL ADB P.DG A4001N

©(2011) ADB BroadbandS.p.A. AllRights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

2 Welcome

TABLE 1. Notice Icons

Icon

Notice Type

Description

Warning

Informationthat alertsyou topotential personalinjury.

TABLE 2. Text Conventions

Convention

Description

thing, and then press Return or Enter. Do not press Return or Enter

whenan instructionsimplysays

Keyboardkeynames

If you must press two or more keys simultaneously, the key names

are linkedwitha plussign (+).Example:

PressCtrl+Alt+Del

Wordsinitalics

Italicsare usedto:

Emphasizeapoint.

Denotea newtermat the placewhereitis definedinthetext.

Identify menu names, menu commands, and software button

Help menu, select Contents. Click

©(2011) ADB Broadband S.p.A. All RightsReserved. Proprietary Use Pursuant to Cover PageInstructions.

Procedures 3

Procedures

This chapter is dedicated to the main how-to procedures description. For a more

complete device description and operative guidelines, please refer to the product

Administrator Manual.

HOW TO CHANGE ACCESS

PASSWORD Pleasefollowbelow procedure s

Open your web browser and connect to http://192.168.1.1/main.html



Select from the left menu the it -



For the selected account, insert in the related input box the curre

to confirm your changes.

Home Station ADSL ADB P.DG A4001N

4 Procedures

FIGURE 1. Access Password Change panel

HOW TO OPEN PORTS Some applications require that specific ports in the Router's firewall be opened for

access by the remote parties. Port Trigger dynamically opens up the 'Open Ports' in

the firewall when an application on the LAN initiates a TCP/UDP connection to a re-

mote party using the 'Triggering Ports'. The Router allows the remote party from

the WAN side to establish new connections back to the application on the LAN side

using the 'Open Ports'. A maximum 32 entries canbe configured.

Pleasefollow belowstepstolearn howtoopenportsinthefirewall:

Open your web browser and connect to http://192.168.1.1/main.html



-

In the shown panel (see

port

A new panel (see Figure 3) will be shown: you can configure the port set-

tings from this screen by selecting an existing application or creating your

own (Customapplication)



In the table, insert the Trigger port range, Trigger protocol, Open port range

Home Station ADSL ADB P.DG A4001N

Procedures 5



FIGURE 2. Port Triggering panel

FIGURE 3. Port Triggering panel #2

Home Station ADSL ADB P.DG A4001N

6 Procedures

HOW TO UPGRADE THE

FIRMWARE Pleasefollowbelow stepstolearnhow toupdatethedevicefirmware:

Obtain an updated software image filefrom your ISP

Open your web browser and connect to http://192.168.1.1/main.html

Insertthe a

-p-

Enter the path to the image file location in the

box or click the"Browse" button tolocate the image file

Click the "Update Software" button once to upload the new image file.

The update process takes about 2 minutes to complete, and your Router

will reboot.

FIGURE 4. Firmware Upgrade panel

Home Station ADSL ADB P.DG A4001N

Procedures 7

HOW TO HOW TO

CONFIGURE THE ADSL LINE

ADDESSING >> STATIC WITH

RFC1483 To configure a static ADSL line addressing it is necessary to configure the ATM and

WANinterface according tobelow steps:

Open your web browser and connect to http://192.168.1.1/main.html



-

Please verify to have the following settings:

oVPI= 8

oVCI= 35

oDSL Latency = Path0(Path1 deselected)

oDSL Linktype =IPoA

oEncapsulation Mode = LLC/SNAP-ROUTING

oService Category= CBR

oPeak CellRate = 452

oEnable IP QoS NOT checked

FIGURE 5. ATM Interface Configuration

Autres manuels pour P.DG A4001N

Table des matières

Autres manuels ADB Routeur réseau

ADB

ADB P.DG A4001N Manuel utilisateur

ADB

ADB A2100N Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité