Adam Wall Mount Bracket Manuel utilisateur

Wall Mount Bracket

for speaker models

A3X, A5, A5X, ARTist 3 Operation Manual / Bedienungsanleitung

English / deutsch

2

Please read the following safety instructions before installing the Wall mount

speaker bracket. Keep the instructions for further reference. Please heed the

warnings and follow the instructions.

This product is meant for use with ADAM monitors A3X, A5, A5X, ARTist 3 only.

Do not install the wall mount bracket outdoors. It has not been made to stand

weather conditions or rooms with high humidity levels (bathrooms, sauna etc.).

Please make sure to use all screws that you are going to ﬁnd in the package for

installation.

Install the wall mount bracket only at proper walls with adequate anchors.

Fragile walls are not suitable. Please also beware of power supply lines and

water conduits. If you are uncertain about your wall construction or what may lie

behind it, consult a trained installer.

Inspect bolted assemblies regularly and tighten screws if necessary.

Please note that for secure installation a helping second person is needed in

order to avoid accidents and speaker damage.

Safety Instructions

3

Wall Mount Bracket Manual / english

Safety Instructions .............................................2

1. Introduction .......................................................4

2. Overview of parts ...............................................5

3. Installation .........................................................6-7

3.1 Assembling the speaker bracket ........................6

3.2 Attaching the speaker bracket to the wall ..........6

3.3 Attaching the loudspeaker to the wall mount.....7

4. Maintenance ......................................................7

Table of contents

4

1. Introduction

Dear customer,

Thank you for choosing the ADAM Audio wall mount bracket.

This wall mount bracket is suitable for the ADAM monitors A3X, A5, A5X and

the Multimedia speaker ARTist 3.

The manual in front of you is intended to guide you through the installation steps.

We request that you read these sections carefully to ensure easy set up and prevent

potential problems.

If you have any questions about this or any of our products, please don’t hesitate to

contact us – we will be happy to assist you.

For detailed information concerning ADAM’s technologies and products, complete

reviews, and a list of worldwide ADAM users and studios, please visit our website:

www.adam-audio.com

You are invited to share your experience with our products by joining us on Facebook

and also, if you don’t want to miss out on the latest info on ADAM Professional

Audio, come and follow us on Twitter!

We hope very much that you enjoy your new listening experience with your wall-

mounted ADAM loudspeakers and wish you many delightful hours with them.

The ADAM Audio Team

5

Wall Mount Bracket Manual / english

2. Overview of parts

Please check the delivery content to ensure you have all of the following components:

• 1x wallplate with side arm (preassembled)

• 1x speaker holding plate (T-shaped)

• 1x adapter plate

• 2 socket screws M6 + washers

• 1x Allen wrench

• 2x screw wrenches

content in extra pouch:

• 2 longer socket screws (those will be needed to

screw the monitor onto the wall mount)

❍

6

3.1 Assembling the speaker bracket

a) Turn the preassembled wall mount in your

hands so that you can see the screw heads of

the side arm facing up.

b) Attach the T-shaped plate (with the ‘T’ facing

up) onto the smaller plate of the wall mount

by using the two shorter socket screws and

washers.

*A3X owners: Please read the ﬁrst note at the bottom of this page.

3.2 Attaching the speaker bracket to the wall

Required tools: drill, level, pencil

Required material: 2 wall anchors or molly bolts (as appropriate), 2 dowels (not

included)

a) Find a location on the wall where you wish to mount the wall plate, ensuring that

it is vertical. Mark the drill holes with a pencil.

b) Drill the holes for the wall plugs, insert them and attach the wall plate to the wall.

Please note:

*Due to limited space on the rear panel of the A3X models you have to attach

the T-shaped plate with the ‘T’ facing down onto the smaller plate of the wall

mount to be able to connect the mains cable to the A3X speaker.

Please check the walls before installation to ensure that you choose

appropriate bolts or anchors in diameter.

3. Installation

7

Wall Mount Bracket Manual / english

3.3 Attaching the loudspeaker to the wall mount

Please consider having a helper during the installation process. This can avoid

injuries and speaker damage.

a) Bring the arm that is going to hold the speaker in

a horizontal position by screwing down the socket

screw on top of the side arm using the included

Allen wrench.

b) Turn the speaker holding plate with attached

T-plate aside so that you will be able to mount the

speaker easily.

c) Place the adapter plate between the T-Plate and the two

screw holes on the rear of the speaker before you screw

the monitor onto the wall mount (using the two longer

socket screws). A second person should raise the speaker

while you are doing this.

d) Turn the monitor into the desired position. Adjust the angle of the side arm again

if necessary. Tighten all screws ﬁnally.

4. Maintenance

Please be careful during maintenance work and watch out for possible injuries.

Inspect bolted assemblies regularly to ensure they remain tight.

Use a damp cloth on a mild, nonabrasive detergent to clean the wall mount bracket.

3. Installation

Notes/Notizen

............................................................................................................

...........................................................................................................

............................................................................................................

Bedienungsanleitung

deutsch

Wandhalterung

für die Monitore

A3X, A5, A5X, ARTist 3

10

Bitte beachten Sie die folgenden Sicherheitshinweise, bevor Sie die

Wandhalterung montieren. Bitte heben Sie diese Anleitung auf. Bitte beachten

Sie die Warnungen und folgen Sie allen Anweisungen.

Bitte verwenden Sie den Wandhalter nur für die angegebenen ADAM-

Lautsprechermodelle A3X, A5, A5X und ARTist 3.

Verwenden Sie den Wandhalter ausschließlich für die Innenmontage in trockenen

Räumen, er ist nicht für Außen- bzw. Feuchträume geeignet.

Benutzen Sie unbedingt alle mitgelieferten Schrauben für die Wandbefestigung.

Montieren Sie die Wandhalterung nur an geeigneten Wänden. Ungeeignet sind

schwache Wände, oder Wände, hinter denen Strom- und Wasserleitungen verlegt

sind. Im Zweifelsfall ziehen Sie bitte einen qualiﬁzierten Fachmann zu Rate.

Prüfen Sie in regelmäßigen Abständen Festigkeit und Zustand der Bauteile und

der Verschraubungen. Ziehen Sie gegebenfalls lockere Schraubverbindungen

nach.

Zur Montage sind zwei Personen erforderlich, um ein Abrutschen des

Lautsprechers sowie Unfälle zu vermeiden. Beachten Sie bitte ausserdem, dass

die Verstellmöglichkeiten der Wandhalterung Einklemmgefahren bergen.

Sicherheitshinweise

Adam Wall Mount Bracket Manuel utilisateur

Manuels Support et étagère populaires d'autres marques