The operator shall be responsible for any modifications to the equipment and for any connections of cables or
equipment not supplied by us and must check and, if necessary, correct these modifications and connections.
On request, Aczet will provide information on the minimum operating specifications
–Protect the DC adapter and the weighing instrument from contact with liquids.
–When cleaning your balance, make sure that no liquid enters the balance housing; use only a slightly
moistened cloth to clean the balance.
–Do not open the balance/scale housing. If the seal is broken, this will result in forfeiture of all claims under
the manufacturer’s warranty.
–If you have any problems with your balance contact your local Aczet Office, dealer or service center
1.2 Getting Started
Storage and Shipping Conditions Do not expose the balance/scale to extreme temperatures, blows, shocks,
vibration or moisture. Unpacking the Equipment
After unpacking the balance/scale, check it immediately for any visible damage as a result of rough handling
during shipment if you see any sign of damage: Contact your local Aczet Office, dealer or service center.
It is a good idea to save the box and all parts of the packaging until you have successfully installed your balance.
Only the original packaging provides the best protection for shipment. Before packing your balance, unplug all
connected cables to prevent damage.
Cautionary notes
Micro balances may not be operated in hazardous areas. Before attachment of the DC adapter, check whether
the imprinted voltage value matches the local supply voltage.
If it does not, contact your local ACZET dealers. Micro balance may only be used indoor in dry environment.
Accessories supplied
The equipment supplied includes the following:
1. Balance with control unit and Touch screen indicator
2. Touch screen Module Display with 2 nos serial ports for statistical printer and weighing indicator
3. Leveling feet
4. Operating Manual
5. DC adapter- 12vdc, 2 amp and 13Vdc, 1.5 amp
6. Base Plate S.S. (CM)
