Actuator Systems ReliTouch RT-201 Manuel utilisateur
PREFACE
Thank you for purchasing ReliTouch®RT-201 biometric
lock.
Please read the documentation carefully before installation
& use. The manual details all installation procedures.
Manufacturer and/or Distributors of the ReliTouch®RT-201
will not be responsible for any damages caused by incorrect
installation or mishandling of the lock. Any such damages
will void manufacturer’s warranty. Further information on
the warranty terms and conditions can be found on page 85
of this manual.
http://www.advancedactuators.com
ReliTouch® User Manual
2
Table of Contents
Table of Contents........................................................................................2
ReliTouch®RT-201 Installation Guide.....................................................4
Section 1 Parts...........................................................................................4
Section 2 Required Tools .........................................................................5
Section 3 Pre-installation .........................................................................6
3.1 Mark and bore holes on the door.................................................. 6
3.2 Setting/Installing the latch and strike plate ................................... 8
3.3 Removing handles and re-installing for Right/Left handed
configuration ......................................................................................10
Section 4 Installation..............................................................................12
4.1 Impact Alarm Information ............................................................12
4.2 Installing the Outside Unit............................................................13
4.3 Installing the fixing plate .............................................................. 17
4.4 Installing the Inside Unit...............................................................18
Section 5 Power Options ........................................................................22
5.1 AA Batteries ..................................................................................22
5.2 Hardwiring the ReliTouch®RT-201................................................ 23
ReliTouch®RT-201 Operations Manual ................................................24
***SECURITY WARNING*** ..............................................................24
Definitions of Indication Beeps: ..............................................................24
Definitions of LED....................................................................................25
Section 1 Lock Setup ..............................................................................26
1.1 Programming buttons on the inside unit .....................................26
1.2 Setting the Date and Time for the ReliTouch®RT-201..................28
1.3 Setting Fingerprint Sensitivity for the ReliTouch®RT-201 ............33
1.4 Setting the Matching Mode..........................................................34
1.5 Setting the Lock Mode..................................................................36
1.6 Setting up the Lock ID...................................................................38
1.7 Deleting ALL Fingerprints in the ReliTouch®RT-201 .....................39
1.8 Deleting ALL PIN Codes in the ReliTouch®RT-201 ........................40
1.9 Setting up Timed Access for the ReliTouch®RT-201.....................41
www.BuilderDepot.com
http://www.advancedactuators.com
ReliTouch® User Manual
3
1.10 Choosing “ANY TIME” as the Access mode for the ReliTouch®RT-
201 ......................................................................................................43
1.11 Choosing “INVALID” as the Access mode for the ReliTouch®RT-
201®.....................................................................................................44
1.12 Choosing and setting up “ACC-TIME” as the Timed Access mode
for the ReliTouch®RT-201...................................................................45
Section 2 Administrator and User Setup..............................................53
2.1 Creating, Editing & Deleting User Access .....................................55
Section 3 Unlocking the ReliTouch®RT-201 .......................................77
3.1 Unlocking the ReliTouch®RT-201 in 1:N Mode with an enrolled
fingerprint........................................................................................... 77
3.2 Unlocking the ReliTouch®RT-201 in 1:N Mode with a registered
PIN Code .............................................................................................79
3.3 Unlocking the ReliTouch®RT-201 in 1:1 Mode with an enrolled
fingerprint........................................................................................... 80
3.4 Unlocking the ReliTouch®RT-201 in 1:1 Mode with a registered
PIN Code .............................................................................................82
3.5 Unlocking the ReliTouch®RT-201 with the override keys ............83
Support and Warranty Information:......................................................85
USER ENROLLMENT TABLE:............................................................87
www.BuilderDepot.com
http://www.advancedactuators.com
ReliTouch® User Manual
4
ReliTouch®RT-201 Installation Guide
Section 1 Parts
Please familiarize yourself with all the parts in the packaging box of
ReliTouch®RT-201. If any part is missed or damaged, contact your
dealer immediately.
Outdoor Unit
Indoor Unit
Universal Handles
Strike Plate & Box
Rubber Gaskets
Fixing Plate
Over-ride Keys
Tubular Latch
( 2 3/8” & 2 3/4”
adjustable)
Spindle (or tailpiece)
www.BuilderDepot.com
http://www.advancedactuators.com
ReliTouch® User Manual
5
Spindle Springs
Pre-labeled screws
Installation Template
Section 2 Required Tools
①One Electric or battery operated Drill
②One 3/8” Diameter Drill Bit
③A pair of scissors
④One Philips head screw driver
⑤One long, thin shafted Phillips Head Screwdriver
www.BuilderDepot.com
http://www.advancedactuators.com
ReliTouch® User Manual
6
Section 3 Pre-installation
3.1 Mark and bore holes on the door
3.11 Use the following steps to properly mark holes on door for
drilling:
1) Remove existing handle set.
2) Cut out the two, 3/8” holes on the Installation Template that
correspond to your existing backset (2 3/8” or 2 ¾”).
www.BuilderDepot.com
http://www.advancedactuators.com
ReliTouch® User Manual
7
3) Rest the installation template on the front of the door, on top of the
existing 2 1/8” hole, making sure that it is aligned properly for the
door’s existing 2 3/8” or 2 ¾” backset.
4) Mark the two, 3/8” holes that you cut out of the installation
template on the door (with a magic marker).
www.BuilderDepot.com
http://www.advancedactuators.com
ReliTouch® User Manual
8
5) Bore the two, 3/8” holes into the door (using a 3/8” drill bit),
making sure that the holes fully penetrate through the door.
3.2 Setting/Installing the latch and strike plate
1) The latch that is included with the ReliTouch®RT-201 is
adjustable for doors that have 2 3/8” or 2 ¾” backsets. Adjust the
backset by sliding the spindle hole under the correct setting for
your door.
www.BuilderDepot.com
http://www.advancedactuators.com
ReliTouch® User Manual
9
2) Insert the latch into the hole in the edge of the door and screw into
place, making sure that the center of the latch’s spindle hole is in
the center of the drilled 2 1/8” hole.
3) Screw the included strike plate into the door jamb.
www.BuilderDepot.com
http://www.advancedactuators.com
ReliTouch® User Manual
10
3.3 Removing handles and re-installing for Right/Left handed
configuration
1) The ReliTouch®RT-201 is a non-handed lock, meaning that it can
be installed on either a right handed or left handed door.
2) Use the following steps to install the handles:
2a) Insert outside units’ handle onto the lock based on your
right/left handed configuration.
2b) Turn the outside unit over and insert a long, thin Phillips
head screwdriver into the spindle hole.
www.BuilderDepot.com
Table des matières
Autres manuels Actuator Systems Serrure de porte
