Actelis Networks MetaLIGHT P2MP Manuel utilisateur

User Manual

MetaLIGHT P2MP

Release 4.00

Revision No. A

Document No. 520R41301E

without notice. Printed in U.S.A.

Notice

This publication is protected by International copyright law. No part of this publication may be copied or

distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer

language in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or

disclosed to third parties without the express written permission of Actelis Networks, Inc., 6150 Stevenson

Boulevard, Fremont, CA 94538.

Disclaimer of Warranties and limitation of Liabilities

Actelis Networks, Inc. (hereafter referred to as Actelis Networks, Inc. or Actelis Networks), makes no

representation or warranties with respect to the contents hereof and specifically disclaims any implied

warranties of merchantability or fitness for a particular purpose. Further, in no event, shall Actelis

Networks be liable for incidental or consequential damages in connection with or arising from the use of

the MetaLIGHT® P2MP, cards and modules, accessories kits, this manual or any related materials.

Actelis Networks reserves the right to revise this publication from time to time and to make changes in the

content hereof without obligation to notify any person of such revisions or changes.

Warranty, Sales, Service and Training Information

 Please contact your local sales representative, service representative or distributor directly for any help

needed. For additional information concerning warranty, sales, service, repair, installation,

documentation, training or distributor locations, use one of the following:

 Internet: Visit the Actelis Networks World Wide Web site at: http://www.actelis.com.

 Email: [email protected] for technical support.

 Customer support: Contact Actelis Networks Customer Support directly at:

 USA: 1 866 638 2544 or 1 510 545 1071

 Spain: 90 095 70 49

 France: (0) 800 918 450

 Russia: (0) 800 22711012

 UK: (0) 800 9179049

 Germany: (0) 800 1833504

For all other inquiries, please call +1 866 ACTELIS (+1 866 228 3547) or +1 510 545 1071.

Trademarks

Actelis, Actelis Networks, the Actelis Networks logo, MetaLIGHT, MetaLOOP, Profit from Copper, High

Speed Link, HSL, and MetaASSIST are trademarks or registered trademarks of Actelis Networks, Inc. All

other products and services mentioned herein are the trademarks, service marks, registered trademarks or

registered service marks of their respective owners.

Document Feedback

We welcome your comments and suggestions about this document. Please mail them to Technical

Publications, Actelis Networks, 6150 Stevenson Boulevard, Fremont, CA 94538 or Email:

[email protected]. Include the document number, revision number and title of this document in your

correspondence. Please include your name and phone number if you are willing to provide additional

clarification.

Document Identification

MetaLIGHT® P2MP Release 4.00 User Manual

Document No. 520R41301E

Revision - A01

Date: Aug. 2005

MetaLIGHT 1300/130 FCC Compliance

The MetaLIGHT 1300/130 complies with the limits for a Class A digital device that is marketed for use in

a commercial, industrial or business environment, exclusive of a device which is intended to be used by

the general public or is intended to be used in the home. This equipment generates, uses, and can radiate

radio-frequency energy and, if not installed and used in accordance with the User Manual, may cause

harmful interference to radio communications.

The authority to operate this equipment is conditioned by the requirement that no modifications will be

made to the equipment unless the changes or modifications are expressly approved by Actelis Networks,

Inc.

Warning: This is a Class A product. In a domestic environment, this product may cause radio

interference, in which case you may be required to take adequate measures.

Canadian Emissions Requirements

The MetaLIGHT P2MP Class A digital apparatus meets all requirements of the Canadian Interference-

Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

Notice

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This

is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that

registration was performed based on a Declaration of Conformity indicating that Industry Canada

technical specifications were met. It does not imply that Industry Canada approved the equipment.

CE Mark

This equipment was tested and conforms to the Council Directive 89/336/EEC for electromagnetic

compatibility. Conformity with this directive is based upon compliance with the following harmonized

standard ETSI EN 300 386 V1.3.1 (2001- 09).

General Safety Summary

1. Read and follow all warning notices and instructions marked on this product or included in this

manual.

2. All installation, repair or replacement procedures must be performed by qualified service personnel.

3. Before attempting to operate or repair this product, make sure product is properly grounded.

4. This product uses an external power source. Do not touch exposed connections, components or wiring

when power is present.

5. Do not operate this product with panels removed or with suspected failure or damage to electrical

components.

6. Do not operate or repair this product in wet or damp conditions or in an explosive atmosphere.

7. Keep product surfaces clean and dry.

8. Provide proper ventilation.

9. Observe all ratings and markings on the product. Use only the fuse type and rating specified for this

product. Before making connections to the product, consult the appropriate chapters of this manual for

further ratings information.

10. Many of the cables for this product are supplied by Actelis Networks. Cables that are supplied by the

customer must comply with the regulatory inspection authorities and are the responsibility of the

customer. To reduce the risk of fire, make sure all cables are UL Listed or CSA Certified.

11. This equipment must be installed according to country national electrical codes. For North America,

equipment must be installed in accordance with the US National Electrical Code, Articles 110–16,

110–17 and 110–18 and the Canadian Electrical Code, Section 12. If necessary, consult with the

appropriate regulatory agencies and inspection authorities to ensure compliance.

12. Overcurrent Protection: A readily accessible Listed branch circuit overcurrent protective device rated

10 A Slow Blow for MetaLIGHT 1300 or 5 A Slow Blow for MetaLIGHT 130 must be incorporated

in the building wiring.

13. The equipment shall be connected to a properly earthed supply system.

14. All equipment in the immediate vicinity shall be earthed the same way and shall not be earthed

elsewhere.

15. The AC/DC supply system is to be local, i.e., within the same premises as the equipment.

16. A disconnect device is not allowed in the earthed circuit between the DC supply source and the

frame/earthed circuit connection.

Prevention of Electrostatic Discharge (ESD) Damage

1. When working with electronic components, wear a commonly grounded antistatic wrist strap to

discharge the static voltage from your body in accordance with approved standards.

2. Do not use any devices capable of generating or holding a static charge in the work area where you

install or remove electronic components. Avoid handling electronic components in areas that have a

floor or benchtop surface capable of generating a static charge.

3. Do not slide electronic components over any surface. Do not touch exposed connector pins. Handle

electronic components as little as possible.

4. Transport and store electronic components in an approved static-protected bag or container.

Contents

About This Manual ................................................................................................................................... viii

1System Description 1-1

System Overview...................................................................................................................................... 1-2

Long Reach Ethernet Over Multiple Copper Pairs ........................................................................ 1-2

Point to Multi-Point (P2MP) Architecture..................................................................................... 1-2

In Accordance to EFM Standard ...................................................................................................1-2

Powered by MetaLOOP Technology............................................................................................. 1-2

Allocation Flexibility..................................................................................................................... 1-2

Loop Lengths over 18 Kft (5.5 Km).............................................................................................. 1-3

Typical Telco System Deployment ............................................................................................... 1-3

Typical Enterprise System Deployment ........................................................................................ 1-4

Management Capabilities .............................................................................................................. 1-4

Management Model....................................................................................................................... 1-5

Physical Characteristics................................................................................................................. 1-7

Features..................................................................................................................................................... 1-9

System Features............................................................................................................................. 1-9

Copper Service .............................................................................................................................. 1-9

Ethernet Service........................................................................................................................... 1-10

Service Assurance ....................................................................................................................... 1-11

Management Capabilities ............................................................................................................ 1-12

Technical Description............................................................................................................................. 1-14

System Architecture .................................................................................................................... 1-14

MetaLIGHT 1300 CO Node Modules ......................................................................................... 1-15

MetaLIGHT 130 CO Node Modules........................................................................................... 1-16

Service Dispatcher Unit (SDU) ...................................................................................................1-17

Multiport Line Unit (MLU)......................................................................................................... 1-19

MetaLIGHT 1300/130 Modules .................................................................................................. 1-20

External Interfaces and Indications......................................................................................................... 1-21

MetaLIGHT 1300 Interface Locations and Descriptions ............................................................ 1-21

MetaLIGHT 130 Interface Locations and Descriptions .............................................................. 1-25

2Installing the System 2-1

MetaLIGHT 1300 Pre-Installation Requirements and Procedures ........................................................... 2-2

MetaLIGHT 1300 Chassis Versions.............................................................................................. 2-2

Overview ....................................................................................................................................... 2-2

System Requirements .................................................................................................................... 2-4

Tools and Materials ....................................................................................................................... 2-8

Unpacking the System................................................................................................................. 2-11

System Grounding ....................................................................................................................... 2-13

MetaLIGHT 1300 System Installation.................................................................................................... 2-15

Installation Overview .................................................................................................................. 2-15

Mounting the System................................................................................................................... 2-16

Installing the SDU and MLU Plug-in Cards................................................................................ 2-21

Wiring Information and Procedures ............................................................................................ 2-23

MetaLIGHT P2MP Release 4.00 User Manual i

Contents

Cabling Information and Procedures ........................................................................................... 2-28

Powering Up the MetaLIGHT 1300 System...........................................................................................2-41

What You Need to Know ............................................................................................................ 2-41

Powering Up the MetaLIGHT 1300 ............................................................................................ 2-41

MetaLIGHT 130 Pre-Installation Requirements and Procedures ........................................................... 2-44

System Requirements .................................................................................................................. 2-44

Tools and Materials ..................................................................................................................... 2-47

Unpacking the System................................................................................................................. 2-50

System Grounding ....................................................................................................................... 2-51

MetaLIGHT 130 System Installation...................................................................................................... 2-52

Installation Overview .................................................................................................................. 2-52

Mounting the System................................................................................................................... 2-53

Assembling the DC-PFM (optional)............................................................................................ 2-58

Assembling the AC-PFM (optional)............................................................................................ 2-60

Wiring Information and Procedures ............................................................................................ 2-62

Cabling Information and Procedures ........................................................................................... 2-69

Powering Up the MetaLIGHT 130 System............................................................................................. 2-81

What You Need to Know ............................................................................................................ 2-81

Powering Up the MetaLIGHT 130 .............................................................................................. 2-81

3Configuring the System Using MetaASSIST View 3-1

Getting Started with MetaASSIST View.................................................................................................. 3-2

Introduction ................................................................................................................................... 3-2

Accessing the MetaLIGHT System ............................................................................................... 3-2

Connecting to MetaLIGHT via MetaASSIST View...................................................................... 3-4

The MetaASSIST View Workplace .............................................................................................. 3-7

Quick Configuration Procedure .............................................................................................................. 3-14

Task Overview............................................................................................................................. 3-14

Verifying CO Equipment Conditions .......................................................................................... 3-16

Configuring CPE ......................................................................................................................... 3-16

Operating the High Speed Link ...................................................................................................3-18

Enabling Ethernet Ports............................................................................................................... 3-22

Configuring Service VLAN......................................................................................................... 3-23

Configuring Connection Bandwidth............................................................................................ 3-25

Connecting Ethernet Cables ........................................................................................................ 3-26

Setting Date and Time ............................................................................................................................ 3-27

Configuring Date and Time Manually......................................................................................... 3-27

Automatic Date and Time Adjustment ........................................................................................ 3-28

Daylight Saving Time (DST) Configuration ............................................................................... 3-29

Management Parameters Configuration.................................................................................................. 3-31

Overview ..................................................................................................................................... 3-31

Craft Port Configuration.............................................................................................................. 3-32

Dialup Modem Configuration ..................................................................................................... 3-32

CPE Access Configuration .......................................................................................................... 3-33

LAN Access Configuration ......................................................................................................... 3-34

IP Connectivity Configuration..................................................................................................... 3-35

System Name Configuration .......................................................................................................3-36

SNMP Agent Configuration ........................................................................................................3-36

Office Alarm Output (GPO) Configuration................................................................................. 3-40

Environmental Alarm Configuration........................................................................................... 3-42

System Configuration Procedures........................................................................................................... 3-47

Sealing Current Configuration..................................................................................................... 3-47

ii MetaLIGHT P2MP Release 4.00 User Manual

Contents

CO Equipment Configuration......................................................................................................3-48

CPE Equipment Manual Configuration....................................................................................... 3-51

High Speed Link Configuration .................................................................................................. 3-52

Modems Assignment to the High Speed Link ............................................................................. 3-53

High Speed Link Calibration....................................................................................................... 3-54

Performance Monitoring Configuration ...................................................................................... 3-59

Ethernet Port Configuration......................................................................................................... 3-67

Ethernet Bridge Configuration .................................................................................................... 3-70

VLAN Configuration................................................................................................................... 3-72

STP Configuration....................................................................................................................... 3-77

Ethernet Traffic Classification Configuration ............................................................................. 3-82

Ethernet Service Connection Bandwidth Configuration.............................................................. 3-86

Service Suspension and Restoration............................................................................................ 3-87

Alarm Configuration ................................................................................................................... 3-88

Restarting the System .................................................................................................................. 3-90

4System Monitoring, Administration and Security 4-1

Monitoring Local CO Indications............................................................................................................. 4-2

Overview ....................................................................................................................................... 4-2

Front and Rear Panel LEDs ........................................................................................................... 4-2

Office Alarm Operations ............................................................................................................... 4-8

Monitoring the MetaLIGHT System ........................................................................................................ 4-9

Overview ....................................................................................................................................... 4-9

MetaLIGHT System View...........................................................................................................4-10

Modem Ports Status and Performance......................................................................................... 4-14

Equipment Status and Inventory..................................................................................................4-18

HSL Status Details ...................................................................................................................... 4-20

Ethernet Bridge Status, Forwarding Database and STP Monitoring ........................................... 4-25

Ethernet BW Monitoring ............................................................................................................. 4-33

L2/L3 Classification Monitoring .................................................................................................4-36

CPE Local Monitoring Details ....................................................................................................4-37

Administration ........................................................................................................................................ 4-41

Updating the System Software ....................................................................................................4-41

Configuration Backup and Restore.............................................................................................. 4-45

Log Files...................................................................................................................................... 4-50

Security................................................................................................................................................... 4-56

Changing Your Own Password ................................................................................................... 4-56

Managing User Accounts and Sessions....................................................................................... 4-57

Configuring SNMP Security Settings.......................................................................................... 4-65

SSH - Secure Shell ...................................................................................................................... 4-65

Access Control............................................................................................................................. 4-71

5Service 5-1

Troubleshooting Overview ....................................................................................................................... 5-2

Introduction ................................................................................................................................... 5-2

Recommended Test Equipment..................................................................................................... 5-2

Technical Support.......................................................................................................................... 5-2

Troubleshooting Power On Faults ............................................................................................................ 5-3

No Power Indication...................................................................................................................... 5-3

SDU does not start initialization.................................................................................................... 5-4

MetaLIGHT P2MP Release 4.00 User Manual iii

Contents

MLU does not start initialization................................................................................................... 5-4

Date and Time is Reset after Power-up ......................................................................................... 5-4

Troubleshooting LED Fault Indications ................................................................................................... 5-5

Running the Lamp Test ................................................................................................................. 5-5

Lamp Test Results and Corrective Procedures .............................................................................. 5-6

Troubleshooting Alarmed Conditions....................................................................................................... 5-8

Overview ....................................................................................................................................... 5-8

Troubleshooting Workflow ........................................................................................................... 5-8

Troubleshooting Tables ................................................................................................................. 5-9

Field Descriptions........................................................................................................................ 5-10

Node Alarms Troubleshooting .................................................................................................... 5-12

Equipment Alarms Troubleshooting............................................................................................ 5-14

Modem Ports Alarms Troubleshooting ....................................................................................... 5-30

High Speed Link Alarms Troubleshooting.................................................................................. 5-34

Service Ports Troubleshooting..................................................................................................... 5-40

Resolving Copper Installation Problems................................................................................................. 5-41

Resolving Swapped or Incorrectly Replaced Line Problems....................................................... 5-41

Troubleshooting Copper Pairs using Audible Tone Injection ..................................................... 5-44

Resolving Non-Alarmed Service Problems ............................................................................................ 5-45

Overview ..................................................................................................................................... 5-45

No Ethernet Traffic Through the System .................................................................................... 5-45

Reduced Ethernet Traffic Throughput......................................................................................... 5-47

Insufficient Quality of Traffic (Frame Drop) .............................................................................. 5-48

Service Fault Isolation ............................................................................................................................ 5-51

Ping.............................................................................................................................................. 5-51

Frame Triggering......................................................................................................................... 5-53

Service Assurance................................................................................................................................... 5-57

Ethernet Statistics ........................................................................................................................ 5-57

Using Performance Monitoring ................................................................................................... 5-60

Resolving Management Connection Problems ....................................................................................... 5-63

Configuration problems............................................................................................................... 5-63

Login problems (common for all interfaces) ............................................................................... 5-65

Resolving MetaASSIST View / MetaLIGHT Software Problems .............................................. 5-67

6System Maintenance 6-1

Replacing the SDU Plug-in Card.............................................................................................................. 6-2

Purpose .......................................................................................................................................... 6-2

Tools and Materials ....................................................................................................................... 6-2

Hot Extraction/insertion of Cards.................................................................................................. 6-2

Maintenance Time Window Requirement..................................................................................... 6-3

Removing an SDU Card................................................................................................................ 6-3

Installing a Replacement SDU card...............................................................................................6-3

Replacing the SFP Transceiver................................................................................................................. 6-5

Purpose .......................................................................................................................................... 6-5

Tools and Materials ....................................................................................................................... 6-5

Hot Extraction/Insertion of SFP Optical Transceiver.................................................................... 6-5

Removing the SFP Transceiver ..................................................................................................... 6-5

Replacing the SFP Transceiver...................................................................................................... 6-6

Replacing MLU Plug-in Card................................................................................................................... 6-7

Purpose .......................................................................................................................................... 6-7

Tools and Materials ....................................................................................................................... 6-7

Hot Extraction/Insertion of Cards.................................................................................................. 6-7

iv MetaLIGHT P2MP Release 4.00 User Manual