ACS ACR128U Manuel utilisateur

Advanced Card Systems Ltd.

Website: www.acs.com.hk

Email: info@acs.com.hk

User Manual

V2.0 interface and the speed up to 12Mbps. This device Firmware Upgradeable through

USB V2.0 Interface. (12Mbps)

The ACR128U is a Contact and Contacless Smart Card Reader and Writer

Page 2 of 5

Universal Terminal UT1

Version 0.03 Oct 2008

1.0

INTRODUCTION

developed on the 13.56MHz Contactless Technology. This device is a dual-interface

reader (IFD and PCD) that supports both contact (ICC) and contactless (PICC) smart

cards. It is designed to support ISO 7816 Parts 1-4 and ISO14443 Type A and B Cards,

Hybrid Cards and Combi Cards but not FeliCa tags.

High-speed (424 kbps) communication for PICCs (Maximum 848 kbps). Energy saving

modes for turning off the antenna field whenever the PICC is inactive, or no PICC is

found. It prevents the PICC from exposing to the field all the time. I t can support USB

the RS232 Interface with a special cable can more easily.

2.0

FEATURES

• One standard ICC landing type card acceptor.

• One SAM socket is provided for highly secure applications.

• A built-in antenna for PICC contactless access applications.

• ISO 7816 Parts 1-4 Compliant for Contact Smart Card Interface.

• ISO 14443 Parts 1-4 Compliant for Contactless Smart Card Interface.

• T=CL emulation for MIFare 1K/4K PICCs. Multi-Blocks Transfer Mode is provided for

efficient PICC access.

• High Speed (424 kbps) Communication for PICCs. #Maximum 848 kbps.

• Intelligent Support for Hybrid Cards and Combi Cards.

• Energy saving modes for turning off the antenna field whenever the PICC is inactive, or

no PICC is found. It prevents the PICC from exposing to the field all the time.

• User-Controllable Peripherals. E.g. LED, Buzzer.

• CCID Compliant.

• PCSC Compliant for Contact, Contactless and SAM Interfaces.

•

• Device Firmware Upgradeable through the RS232 Interface with a special cable.

ACR128U Contact and Contactless Smart Card Reader and Writer

Advanced Card Systems Ltd.

Website: www.acs.com.hk

Email: info@acs.com.hk

3.0

Typical Applications

• Network access control

• Micro-payment

• Public Transportation Terminals

• Automatic Fare Collection

• Physical access control

• Customer Loyalty

• Time attendance

• Contactless public phones

• Vending machines

• ICAO E-Passport

4.0

Installation Procedure

Plug the ACR128U USB cable into the USB port. When the reader connects to the PC,

then the user must be install the driver to start up the reader.

5.0

Hardware Interfaces

5.1 Bi-Color LED Indicator

The LEDs are used for showing the state of the contact and contactless interfaces.

Reader States Red LED

PICC Indicator

Green LED

ICC Indicator

1. No PICC Found A single pulse per

~ 10 seconds

2. PICC is present but not activated Toggling ~ 0.3 Hz

3. PICC is present and activated ON

4. PICC is operating Blinking

5. ICC is present and activated ON

6. ICC is absent or not activated OFF

7. ICC is operating Blinking

activated). E.g. 424kbps High Speed Mode

Advanced Card Systems Ltd.

Website: www.acs.com.hk

Email: info@acs.com.hk

5.2 Buzzer

A monotone buzzer is used to show the “Card Insertion” and “Card Removal” events

Events Buzzer

1. Card Insertion Event (ICC or PICC) Beep

2. Card Removal Event (ICC or PICC) Beep

3. Combi Card (support both ICC and PICC

interfaces) is inserted in the contact card

acceptor

2 Beeps

4. PICC is activated 1 beep per second

(Default = Disabled)

5. PICC is activated (PPS Mode is 2 beeps per second

(Default = Disabled)

5.3 SAM Interface

• One SAM socket is provided.

5.4 Built-in Antenna

• 3 turns symmetric loop antenna. Center tapped.

• The estimated size = 65mm x 60mm.

• The loop inductance should be around ~ 1.6uH to 2.5uH

• Operating Distance for different Tags ~ up to 50mm (depend on the Tag)

12Mbps

and MFRC531 chips.

This device complies with part 15 of the FCC Rules.

Page 5 of 5

Universal Terminal UT1

Version 0.03 Oct 2008

6.0

Implementation

The ACR128U is built based on the

TDK73S1121F

FCC Warning:

Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

TDK73S1121F

Controller

Built-In

Antenna

Host

Controller

USB

Interface

Contactless

Tag

Contactless Interface

Carrier = 13.56MHz

Serial Interface

115200 Kbps

ACR128U System Block Diagram

SAM

(optional)

- Bi-Color LED

- Buzzer

Contactl

Tag

ACR128U Contact and Contactless Smart Card Reader and Writer

12MHz

MFRC531

Parallel

uController

Interface Crystal:

Crystal: 13.56MHz

Table des matières

Autres manuels ACS Lecteur de cartes

Manuels Lecteur de cartes populaires d'autres marques

Lindy

Lindy 43185 Manuel utilisateur

Lindy

Lindy 43185 Manuel utilisateur

ViziT

ViziT RD-4F Manuel utilisateur

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuel utilisateur

AVID ID

AVID ID AVID1043 Manuel utilisateur

Conrad

Conrad PCMCIA Manuel utilisateur

Rosslare

Rosslare DR-6255 Manuel utilisateur

Lindy

Lindy 51541 Manuel utilisateur

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuel utilisateur

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuel utilisateur

Secukey

Secukey S2-MF Manuel utilisateur

Elecom

Elecom MR-SMC07 series Manuel utilisateur

Alien

Alien ALR-9800 Manuel utilisateur

Datamars

Datamars R-IN1300 MID Manuel utilisateur

Alarm Lock

Alarm Lock AL-PRE2 Manuel utilisateur

xpr

xpr B100PROX-AH Guide de l'utilisateur

SimpleTech

SimpleTech FlashLink Manuel utilisateur

Rolls

Rolls HR74 Manuel utilisateur