ACS ACR1251U-A Manuel utilisateur

Subject to change without prior notice

[email protected]

www.acs.com.hk

Prepared by: Reviewed by: Approved by:

Document Name:

ACR1251U-A User Manual.doc

ACR1251U-A

UserManual

V1.00.00

Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 2 of 13

[email protected]

www.acs.com.hk

Version History

Date By Changes Version

2012-1-3

Vincent Zhong

Lampard Ou

Kit Au

First Release 1.00.00



Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 3 of 13

[email protected]

www.acs.com.hk

Table of Contents

1.0. Introduction ...............................................................................................................4

2.0. Features .....................................................................................................................5

3.0. Architecture...............................................................................................................6

4.0. Connection with computer.......................................................................................7

4.1. plug the ACR1251U-A to a computer USB port, and the red light will be flashing................7

4.2. the driver will be auto install after plugging the reader. You should see the red box below .8

4.3. When you put a contactless card on the reader, the green LED will be on. .........................8

4.4. The card ID can be checked by some card tool software, e.g. APDU.exe, the card ID is

shown in the red box below.....................................................................................................................9

Appendix A. Parameter sheet.........................................................................................10

Appendix B. Firmware Upgrade Procedure...................................................................12

Method 1: Upgrade by “FW” Key....................................................................................................12

Method 2: Upgrade by APDU command........................................................................................12

Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 4 of 13

[email protected]

www.acs.com.hk

1.0.Introduction

The ACR1251U is a dual-interface reader (IFD and PCD) that supports contact (SAM) and

contactless (PICC) smart cards.

Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 5 of 13

[email protected]

www.acs.com.hk

2.0.Features

One standard SIM Size Connector.

ISO 7816 Parts 1-4 Compliant for Contact Smart Card Interface.

ISO 14443 Parts 1-4 Compliant for Contactless Smart Card Interface.

A built-in antenna for PICC contactless access applications.

The ACR1251U supports the following Tag Types:

oMIFARE Classic. E.g. MIFARE 1K, 4K, MINI and Ultralight.

oISO14443-4 Type A and B.

oFELICA、TOPAZ.

T=CL emulation for MIFare 1K/4K PICCs. Multi-Blocks Transfer Mode is provided

for efficient PICC access.

High Speed (424 kbps) Communication for PICCs. #Maximum 848 kbps.

User-Controllable Peripherals. E.g. LED, Buzzer.

Microsoft CCID Compliant for SAM interfaces.

PCSC Compliant for Contact Interfaces.

USB V2.0 Interface. (12M bps)

Device Firmware Upgradeable through the USB Interface.

Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 6 of 13

[email protected]

www.acs.com.hk

3.0.Architecture

AT90SCR is for main processor for communication with PC, and control the contactless chip,

communication with SAM card and peripherals. PN512 act as a contactless chip to perform the

communication between contactless tags and AT90SCR

For communication architecture, the protocol between ACR1251U and PC is using CCID protocol.

The communication between SAM is PCSC Compliant

ACR1251U

PCSC SAM

Interface

PSCS Layer

ISO7816 Part 1-4 SAM

(Optional) T=CL & T=1

Emulation

ISO14443

Part1-4

PICC Interface

SAM (Socket) PICC (Built-in

Antenna)

USB

Interface

(CCID)

Physical

Interface

ACR1251

Proprietary API

Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 7 of 13

[email protected]

www.acs.com.hk

4.0.Connection with computer

4.1. plug the ACR1251U-A to a computer USB port, and the red

light will be flashing

Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 8 of 13

[email protected]

www.acs.com.hk

4.2. the driver will be auto install after plugging the reader. You

should see the red box below

4.3. When you put a contactless card on the reader, the green LED

will be on.

Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 9 of 13

[email protected]

www.acs.com.hk

4.4. The card ID can be checked by some card tool software, e.g.

APDU.exe, the card ID is shown in the red box below

Document Title Here

ACR1251U-A2CNCA500

Design Specification

Version 1.00.00

Page 10 of 13

[email protected]

www.acs.com.hk

Appendix A. Parameter sheet

Device

ACR1251U Smart Card Reader/Writer

Power supply

Supply voltage................................ Regulated 5V DC

Supply current................................ <200mA (without smart card)

Universal Serial Bus Interface

Type............................................... USB, four lines: +5V, GND, D+ and D-

Connector ...................................... supplied together with the reader

Speed............................................. Full Speed Device, 12 Mbps

Contact Smart Card Interface

Standard ........................................ ISO 7816 1/2/3, T=0 and T=1

Supply current................................ max. 50mA

Smart card voltage......................... 5V / 3V / 1.8V

Smart card read / write speed........ 9600 – 344kbps

Short circuit protection .................. +5V / GND on all pins

CLK frequency ............................... 4.8 MHz

Card connector............................... SIM Connector

Contactless Smart Card Interface

Standard...............................................ISO 14443 A & B Parts 1-4, ISO18092

Protocol................................................ISO14443 T=CL for ISO14443-4 compliant cards and T=CL Emulation for MIFARE

1K/4K, ISO 18092 FelCa and NFC tag

Smart card read / write speed................106 kbps, 212 kbps, 424 kbps and 848 kbps

Operating Frequency for Contactless Cards Access

Operating Frequency.............................13.56 MHz

Antenna

Antenna Size..........................................65mm x 60mm

Operating distance.................................up to 50 mm (Depend on Card Type)

Built-in peripherals

Monotone buzzer

Dual-Color LED

Case

Dimensions .................................... 98 mm (L) x 65 mm (W) x 12.8 mm (H)

Color .............................................. White Blue

Operating Conditions

Temperature .................................. 0 - 50C

Humidity......................................... 10% - 80%

Cable Connector

Length....................................................1.5m (USB)

Table des matières

Autres manuels ACS Lecteur de cartes

ACS

ACS ACR122 Series Guide de l'utilisateur

ACS

ACS ACR89U-A1 Manuel utilisateur

ACS

ACS ACR89U-A2 Manuel utilisateur

ACS

ACS ACR38 Smart Manuel utilisateur

ACS

ACS ACR1281U-C1 Dualboost 2 Manuel utilisateur

ACS

ACS ACR1283L Manuel utilisateur

ACS

ACS AET62 Manuel utilisateur

ACS

ACS ACR3901U-S1 Manuel utilisateur

ACS

ACS ACR38U-I1 Manuel utilisateur

ACS

ACS ACR39x Manuel utilisateur

ACS

ACS ACR30U Instructions de montage

ACS

ACS ACR122 Series Manuel utilisateur

ACS

ACS ACR122U Manuel utilisateur

ACS

ACS ACR30 Manuel utilisateur

ACS

ACS ACR122U Manuel utilisateur

ACS

ACS MIIX 3-1030 Manuel utilisateur

ACS

ACS ACR128 Manuel utilisateur

ACS

ACS ACR30 Manuel utilisateur

ACS

ACS ACR3901T-W1 Manuel utilisateur

ACS

ACS ACR3901T-W Manuel utilisateur

ACS

ACS ACR38 Smart Manuel utilisateur

ACS

ACS ACR100I Manuel utilisateur

ACS

ACS ACR1255U-J1 Manuel utilisateur

ACS

ACS APG8201 PINhandy 1 Manuel utilisateur

Manuels Lecteur de cartes populaires d'autres marques

Lindy

Lindy 43185 Manuel utilisateur

Lindy

Lindy 43185 Manuel utilisateur

ViziT

ViziT RD-4F Manuel utilisateur

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuel utilisateur

AVID ID

AVID ID AVID1043 Manuel utilisateur

Conrad

Conrad PCMCIA Manuel utilisateur

Rosslare

Rosslare DR-6255 Manuel utilisateur

Lindy

Lindy 51541 Manuel utilisateur

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuel utilisateur

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuel utilisateur

Secukey

Secukey S2-MF Manuel utilisateur

Elecom

Elecom MR-SMC07 series Manuel utilisateur

Alien

Alien ALR-9800 Manuel utilisateur

Datamars

Datamars R-IN1300 MID Manuel utilisateur

Alarm Lock

Alarm Lock AL-PRE2 Manuel utilisateur

xpr

xpr B100PROX-AH Guide de l'utilisateur

SimpleTech

SimpleTech FlashLink Manuel utilisateur

Rolls

Rolls HR74 Manuel utilisateur