Acrel ADL200 Manuel utilisateur

ADL200 – User Manual

GENERAL

This 80A direct connect DIN Rail meter is for use with single

phase supplies and measures electrical parameters including

Current (I), Voltage (V), Power (kW/KVA/KVAr), Power Factor

(PF), Frequency (Hz), Imported, Exported and Total Energy

(kWh/kVArh).

It’s MID approved, allowing it to be used for billing applications

and is highly accurate, (Class B, ±1%). With both a Pulse Output

and RS485 Modbus RTU it can be integrated with BMS or

remote monitoring systems.

SPECIFICATION

Meter Type Single Phase

Fitting Type DIN Rail

Max. Current (Amps) 80A

MID Approved Yes

Smart (GPRS modem) No

Input Type Direct Connect

Tariffs Single

Import / Export Import & Export

Module Width 2

Reference Voltage AC 220V

Consumption <4VA

Frequency 50Hz

Accuracy – Active Energy Class 1

Clock ≤0.5 s/d

Pulse Output Active Energy

Width of Pulse 80±20ms

Pulse Constant 1000imp/kWh

Interface and

Communication Protocol

Modbus RTU over RS485

Range of Modbus Addresses 1 - 254

Baud Rate 1200bps - 19200bps

Working Temperature -25

℃

- +55

℃

Relative Humidity ≤95% (No condensation)

IP Rating IP20

LCD Display 8 digit LCD backlit display

Key Programming 3 keys to view and set

parameters

MEASURED PARAMETERS

 Active Energy (kWh)

 Active Power (W)

 Apparent Energy (kVAh)

 Apparent Power (VA)

 Current (I)

 Frequency (Hz)

 Power Factor (PF)

 Reactive Energy (kVArh)

 Reactive Power (VAr)

 Voltage (V)

SETUP

Press and hold the to enter the setup menu. Enter

the password, (default is “0001”), using the

button to move the cursor and the button to

change the value, then press .

Use the and buttons to scroll through the

values and press to amend any settings.

Once complete, press and hold the button and

select ‘Yes’ to save or ‘No’ to exit without saving

changes.

Symbol

Description Range

Addr

Modbus Address 1 - 254

bAUd

Baud Rate 1200, 2400, 4800,

9600, 19200

Pari

Parity Setting None, Odd, Even

High 645 Comms protocol (N/A)

Low 645 Comms protocol (N/A)

Led

Backlight Time 0-255 minutes，

>250 lights to not turn off

App. Power Calc. P Q or U I (N/A)

Tariff Set N/A on this model

dir

Direction of

current

no-Forward, yes-Reverse

COdE

Code settings 1 - 9999

WIRING

& INSTALLATION

The ADL200 is designed to be installed on a 35mm DIN Rail

Note: Terminal screw torque – 4.0Nm max

DIMENSIONS

HOW TO USE

This unit features 3 buttons to display the measured electrical

parameters. By pressing each button, the user will cycle

through the parameters and settings.

Voltage & Current

Power

Energy

Voltage & Current

Pressing the button displays the following parameters:

Voltage (V)

Current (A)

Frequency (Hz)

Modbus Address

Baud Rate

Parity Setting

High word for 645 Protocol (N/A)

Low word for 645 Protocol (N/A)

Firmware Version

Cr (software verification code)

Full Display Test

Power

Pressing the button displays the following parameters:

Active Power (kW)

Reactive Power (kVar)

Apparent Power (kVa)

Power Factor

Energy

Pressing the button displays the following parameters:

Total (imported + exported) Active Energy (kWh)

Imported Active Energy (kWh)

Exported Active Energy (kWh)

Total Reactive Energy (kVArh)

Imported Reactive Energy (kVArh)

Exported Reactive Energy (kVArh)

MODBUS PROTOCOL

For the full Modbus Protocol please visit:

http://downloads.spwales.com/spdac200-protocol.pdf

Or use the following QR code:

Autres manuels Acrel Instrument de mesure

Acrel

Acrel ADL400 Manuel du propriétaire

Acrel

Acrel AIM-T500L Series Manuel utilisateur

Acrel

Acrel ADW310 Mode d’emploi

Acrel

Acrel ADL400 Manuel du propriétaire

Acrel

Acrel AMC Series Manuel du propriétaire

Acrel

Acrel ACR10R-D TE Series Caractéristiques techniques

Acrel

Acrel DDSY1352 Manuel utilisateur

Acrel

Acrel APM Series Manuel du propriétaire

Acrel

Acrel AID120 Manuel utilisateur

Acrel

Acrel ADL3000-E Manuel du propriétaire

Acrel

Acrel AMC Series Manuel du propriétaire

Acrel

Acrel GGF Series Manuel utilisateur

Acrel

Acrel ADL400 Manuel du propriétaire

Acrel

Acrel ARTM-Pn Manuel utilisateur

Acrel

Acrel AGF-AE-D/200 Manuel utilisateur

Acrel

Acrel APM830 Manuel du propriétaire

Acrel

Acrel AIM-T500 Manuel utilisateur

Acrel

Acrel AIM-R100 Manuel utilisateur

Acrel

Acrel ACR10R Series Manuel du propriétaire

Acrel

Acrel DJSF1352-RN Manuel du propriétaire

Acrel

Acrel AID120 Manuel utilisateur

Acrel

Acrel AMC Series Manuel du propriétaire

Acrel

Acrel AMC16-DETT Manuel d'utilisation et d'entretien

Acrel

Acrel ARTM-Pn Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur