5. Calen ar A justment
To a just the calen ar (time), operate as follows.
You can a just calen ar in the Menu mo e in the same way as LCD a justment.
Menu key
1) When the menu key is inputte ,
the following menu screen appears.
<menu> 1/2
Cursor key Meas Mode : Manu
Set key Interval : Single
I/O : O f f
OUT Ch : X
View key LCD cont : ***** Date
date y/m/d : 00/01/01 a justment
time : 00:00:00
Time a justment
【Calen ar a justment】
1) Select ate y/m/ with Cursor key , then move the cursor rightwar with key.
2) Set the year/month/ ay with key, then press Set key to save the setting.
After pressing Set key, the cursor moves to leftwar .
3) If you want to go back to the measurement mo e, press View key.
【Time a justment】
1) Select time with Cursor key , then move the cursor rightwar with key.
2) Set the hour:minute:secon with key, then press Set key to save the setting.
After pressing Set key, the cursor moves leftwar .
3) If you want to go back to the measurement mo e, press View key.
【Caution】
Be sure to enter the ate ( ate y/m/ ) in the or er of “year → month → ay.”
Input any figure of; y(year): 00 – 99, m(month): 01 – 12, an ( ay): 01– 31.
Ex.) For November 30, 2003
Correct) 03/11/30
Incorrect) 11/30/03 30 has been entere for m(month). Input any figure of
01 through 12.
Be sure to enter the time in the or er of “hour → minute → secon .”
Input any figure of; h(hour): 00 – 24, m(minute): 00 – 59, s(secon ) 00 – 59.
Ex.) For 23:58:32
Correct) 23/58/32
Incorrect) 32/58/23 32 has been entere for h(hour). Input any figure of
00 through 24.
<Entry of incorrect ate an time>
The instrument has a function for outputting ata that was measure or is being measure
to a personal computer.
During recovery of ata, if an incorrect ate an time are entere , an error message “Econver
Error” is isplaye on the screen an ata recovery cannot be carrie out.
