Acer ProDock Manuel utilisateur

Acer ProDock Wireless
User Manual

Table of Contents
1. INTRODUCTION..............................................................................5
1.1 UNPACKING INFORMATION .............................................................. 5
1.2 OVERVIEW.................................................................................... 6
1.3 HARDWARE OVERVIEW ................................................................... 7
2. START USING THE DOCK ...............................................................11
3. PRODOCK WIRELESS MANAGER ...................................................16
3.1 DOCK CLIENT PREFERENCE............................................................. 18
3.2 SIGNAL STRENGTH ....................................................................... 19
3.3 802.11AD PROFILES .................................................................... 19
3.4 ABOUT ...................................................................................... 20
4. WEB GUI MANAGEMENT..............................................................21
4.1 ACCESS THE WEB GRAPHICAL USER INTERFACE (WEB GUI) ................. 21
5. WEB GUI MANAGEMENT: HOME..................................................23
6. MANAGEMENT: WI-FI ..................................................................25

7. WEB GUI MANAGEMENT: INTERNET ............................................28
7.1 WAN SETUP............................................................................... 28
7.2 LAN SETUP ................................................................................ 29
7.3 DHCP SERVER ............................................................................ 30
8. MANAGEMENT: SYSTEM ..............................................................32
8.1 ACCOUNT SETTING....................................................................... 32
8.2 ATTACHED DEVICES ...................................................................... 33
8.4 BACKUP SETTINGS........................................................................ 34
8.5 FIRMWARE UPGRADE ................................................................... 35
8.6 REBOOT ..................................................................................... 36
9. MANAGEMENT: APPLICATION ......................................................37
9.1 USB SETTING.............................................................................. 37
9.2 SAMBA ...................................................................................... 38
10. SPECIFICATIONS .......................................................................40

1
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

2
FCC Caution: Any changes or modifications not expressly approved by the
paty esposile fo opliae ould oid the use’s authoity to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can
be operated. Selection of other channels is not possible.
This device and it's antennas(s) must not be co-located or operating in
conjunction with any other antenna or transmitter except in accordance
with FCC multi-transmitter product procedures.
This device is restricted for indoor use.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator & your
body.

3
Safety Precautions
Please read this use’s aual efoe opeatig this podut. The
information contained in this document is subject to change without
notice. Features or specifications may be different depending on the
type of product model purchased.
Safe Use of This Product
Carefully follow the warnings and safety notices presented within this
manual. Please pay special attention to the following indications of
potentially hazardous situations:
Warning: Indicates a hazardous situation, which, if not avoided, could
result in serious injury.
Caution: Indicates a situation, which, if not avoided, could damage this
product or other devices.
Note: Indicates additional user information to make the user aware of
possible problems and to help the user understand, use, and maintain
the product.
This product needs only an occasional wipe with a dry cloth.
Avoid high moisture conditions and keep away from liquids and
humidity.

4
Do not install or use the product where it is exposed to direct
sunlight or heat.
Care must be taken when using the device in close proximity to
personal medical devices, such as pacemakers and hearing aids.
Do not use this product in environments with a potential explosion
hazard.
The product must be placed horizontally on a hard flat surface or
installed firmly with wall mount kits. Do not place the product
where it may be subject to physical shock or vibration or where the
product may drop, topple, slide or shake; this may cause personal
injury or damage to the product.
If lightning is expected, or the product is not going to be used for a
long period of time, unplug the power cord from the unit.
The use of electronic transmitting devices in aircraft, hospitals, and
petrol stations is forbidden. Please follow the rules and warnings in
these conditions.
The product must ONLY be used with the power supply cord and
power adapter supplied by the manufacturer.
Openings on the housing of the product are required for ventilation.
Do not block or obstruct the air flow through these openings.
Do not operate the product on a soft surface such as carpet, rug,
bed, etc.

5
1. Introduction
1.1 Unpacking Information
Thank you for purchasing this product. Before using the Acer ProDock
Wireless (the Dock), please confirm that the packaging includes the
following items and accessories:
Acer ProDock Wireless unit
Power adapter
Power cord
Quick start guide
Warranty card

6
1.2 Overview
The Dock is a WiGig IP Dock that allows a WiGig-compatible device (such
as your laptop or tablet) to connect to the Dock for using the devices
that have connected to the Dock (for example, the speakers, projector,
and keyboards in a meeting room).
By using the Acer ProDock Wireless Manager (the Manager) on your
laptop you can easily connect your laptop to the Dock and perform basic
management.
To change more advanced settings, you can use the Web GUI (Web
Graphical User Interface) of the Dock. Please see Chapter 4 Web GUI
Management for more information.

7
1.3 Hardware Overview
WPS button and LED indicator
Port/LED
Description
LED
Amber
The system is booting.
Blinking Amber
The system is on and is ready to be
connected.
Fast blinking
Amber
Ongoing firmware upgrade process
Blinking Blue
A device is connecting to the product.
Alternating
Blue/Amber
System error
Blue
A device is connected to the product.
WPS
button
To connect the Dock with a WPS-compatible device, press
this button, and then press the WPS button of the device
within 120 seconds.
WPS button
and LED indicator
Autres manuels pour ProDock
2
Table des matières
Autres manuels Acer Station d'accueil

Acer
Acer USB Type-C Dock II Manuel utilisateur

Acer
Acer ADK930 Manuel utilisateur

Acer
Acer ezDock II Manuel utilisateur

Acer
Acer USB 3.0 Dock U301 Manuel utilisateur

Acer
Acer Thunderbolt 4 Dock T701 Manuel utilisateur

Acer
Acer USB Type-C Gen1 Manuel utilisateur

Acer
Acer Universal USB 2.0 Docking Station Manuel utilisateur

Acer
Acer Universal USB 3.0 Docking Station Manuel utilisateur

Acer
Acer ProDock Manuel utilisateur

Acer
Acer ProDock Manuel utilisateur


















