AceProAV AcePro-CE88-1 Manuel utilisateur

AcePro-CE88-1

HDMI 2.0 HDBaseT Extender with RS-232 & IR/PoC

Quick Installation Guide

www.avlab.com.tw

[email protected]

Transmitter Receiver

Made in Taiwan

AP4-0097B

-1-

TABLE OF CONTENTS

INTRODUCTION................................................................................................................ 2

FEATURES ........................................................................................................................ 2

PACKAGE CONTENTS...................................................................................................... 3

SPECIFICATIONS.............................................................................................................. 4

PANEL DESCRIPTIONS.................................................................................................... 5

CONNECTION DIAGRAM.................................................................................................. 6

IR PASS-THROUGH.......................................................................................................... 7

HDMI PIN DEFINITION ...................................................................................................... 8

HARDWARE INSTALLATION............................................................................................. 8

NOTICE.............................................................................................................................. 9

WARRANTY..................................................................................................................... 10

-2-

INTRODUCTION

The AcePro-CE88-1 HDMI 2.0 HDBaseT Extender with RS-232 & IR/PoC boosts up your

video/audio transmission distance to 60m (198ft) in HDTV 1080p with 36-bit color depth and 35m

(114ft) at 4K-HDR. AcePro-CE88-1 has new generation technology which makes sure the HDBaseT

extender can support HDMI2.0a and HDCP2.2. AcePro-CE88-1 also supports the most advanced

3D video format compliant with HDMI specification and therefore guarantees the highest 3D video

compatibility on the market. With only one cost-effective Cat.5/5e/6 cable, users can readily extend

HDTV sources from DVD players, Blu-ray Disc player, PS4, PC, and any other kinds of sources

compliant with TMDS to distant display monitors including HDMI or DVI enabled TV sets or LCD PC

monitors. With the advanced design for the latest HDMI technology, deep color video, DTS-HD or

Dolby TrueHD audio, and HDCP supports and compatibility are all further insured. AcePro-CE88-1

is also equipped with bi-directional IR pass-through path and RS-232 serial port control. These

bonus features allow users to boost RS-232 and IR control distance up to 60m (198ft) through only

single Cat.5/5e/6 cable with HDMI signals. In addition, AcePro-CE88-1 also supports PoC (Power

over Cable) which can power both units from either TX or RX with power supply.

The AcePro-CE88-1 includes two units: transmitting unit AcePro-CE88-1-TX and receiving unit

AcePro-CE88-1-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR

control packets and carry the signals via one cost effective Cat.5/5e/6 cable. The receiving unit is

responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control

signals. AcePro-CE88-1 offers the most convenient solution for digital signage with long distance

A/V transmission path.

FEATURES

HDMI 2.0a compliant

Supports 4K2K@60 4:4:4 8bits

Supports HDR1, which is 4K2K@60 4:2:0 10bits2

Extends HDMI signal up to 60m (198ft) from the HDMI source at Full HD 1080p 36-bit, 35m

(114ft) at 4K2K@60 444 (4K-HDR Technology)

Supports PoC (Power over Cable) which can power both units from TX or RX side with power

supply

HDCP 2.2/1.43& EDID Bypass

CEC support

Auto equalization

Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission

DTS-HD Master Audio and Dolby TrueHD high bit rate audio support

Supports full frequency IR signal from 20KHz to 60KHz

Bi-directional IR path-through

Full Duplex RS-232 control up to 115,200 bps through connector

Wall mounting housing design for easy and robust installation

Video latency less than 20 us.

-3-

PACKAGE CONTENTS

1x HDMI 2.0 HDBaseT Extender (AcePro-CE88-1 [TX & RX])

1x IR blaster

1x IR receiver

1x DC 12V 2A in-line with C7 power cord

2x 3-pin Terminal Block Connector

4x Screw

1x User Manual

The length depends on the characteristics and quality of the cables. Higher resolutions and

longer transmission distances require low skew cables (<25ns/100m) for best performance.

Unshielded CAT6 with metal RJ45 connectors is recommended.



1. HDR = High Dynamic Range.

2. The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4

8bits is 594MHz.

3. HDCP 2.2 & HDCP 2.3 are equivalent to end users

-4-

SPECIFICATIONS

Model Name

AcePro-CE88-1

Technical

Role of usage

Transmitter [TX]

Receiver [RX]

HDMI compliance

HDMI 2.0a

HDCP compliance

HDCP 2.2 & 1.4

Video bandwidth

Single-link 594MHz [18Gbps]*

Video support

HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)

HDMI over UTP

1080p@60 60m (198ft) [CAT5e]

Audio support

Surround sound [up to 7.1ch) or stereo digital audio

Equalization

Auto

Input TMDS signal

1.2 Volts [peak-to-peak]

Input DDC signal

5 Volts [peak-to-peak, TTL]

ESD protection

[1] Human body model ± 15kV [air-gap discharge] & ± 8kV [contact discharge]

PCB stack-up

6-layer board [impedance control differential 100 ; single 50 ]

IR pass-thru

Bi-directional

RS-232 support

Yes

PoC support

Yes

Input

1x HDMI / 1x 3.5mm

1x RJ-45 / 1x 3.5mm

Output

1x RJ-45 / 1x 3.5mm

1x HDMI / 1x 3.5mm

In / Out

1x RS-232

HDMI source control

Controllable via IR pass-through from RX to TX with IR extenders

HDMI connector

Type A [19-pin female]

Min DIN connector

DIN-9

RJ-45 connector

WE/SS 8P8C(Reverse Mode)

Rotary control switch

None

3.5mm connector

IR receiver / IR blaster

Mechanical

Housing

Metal enclosure

Dimensions

113 x 94 x 30mm [4.4" x3.7" x1.2"]

Weight

151g[6.3 oz]

154g[6.3 oz]

Fixedness

Wall-mounting case with screws

Power supply

12V DC

Power consumption

3 Watt [max]

7 Watt [max]

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

Due to the higher power consumption on the receiving unit, we strongly suggest you plugging

power adapter from the transmitting unit to avoid system at higher temperature level.

*Not support 533MHz

-5-

PANEL DESCRIPTIONS

Transmitting unit ►AcePro-CE88-1-TX

1. Slide Switch: for F/W update ([Left] Normal Mode; [Right] F/W update Mode)

RS-232(terminal block format):

The order of RS-232 pin are TX, RX, GND

(from the left side to the right)

3. HDMI IN: Connects to a HDMI source with HDMI male-male cable

4. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver

5. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster

6. Latch-locking power jack: Connect to 12V DC power supply

7. Power LED: Power indicator LED

8. Link LED: Link indicator LED

RJ45:

Plug in a Cat-5/5e/6 cable that needs to be linked to the receiving unit AcePro-CE88-1-RX

Receiving unit ►AcePro-CE88-1-RX

1. Slide Switch: for F/W update ([Left] Normal Mode; [Right] F/W update Mode)

RS-232(terminal block format):

The order of RS-232 pin are TX, RX, GND

(from the left side to the right)

3. HDMI OUT: Connects to a HDMI display with HDMI male-male cable

4. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver

5. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster

6. Latch-locking power jack: Connect to 12V DC power supply

7. Power LED: Power indicator LED

8. Link LED: Link indicator LED

9. RJ45:

Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit AcePro-CE88-1-TX

-6-

CONNECTION DIAGRAM

-7-

IR PASS-THROUGH

[IR Extenders]

IR Blaster

IR Receiver

[IR Sockets]

IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the

other end to control the devices corresponding to the IR signals.

IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of the

corresponding devices.

[Definition of IR Earphone Jack]

IR Blaster

IR Receiver



You can buy any IR extension cables in the market that are compatible to the definition of the

IR sockets for the extender if necessary for replacement use. However, IR cables longer than

2m (6-ft) may not work.

Incorrect placement of IR Blaster and Receiver may result in the failure of the

IR extenders. Please check carefully before plugging in the IR extender to the

respective IR sockets. Warranty will not cover the damage.

CAUTION!

-8-

HDMI PIN DEFINITION

Type A (Receptacle) HDMI

HARDWARE INSTALLATION

1. Connect a HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit AcePro-

CE88-1-TX.

2. Connect a HDMI or DVI display (such as a LCD TV) to the receiving unit AcePro-CE88-1-RX.

3. Connect IR Blaster/Receiver to both TX and RX units.

4. Connect a Cat-5/5e/6 cable between the transmitting and receiving units.

5. Make sure this Cat-5/5e/6 cable is tightly connected.

6. Plug in 12V DC power supply unit to the power jack of the receiving unit AcePro-CE88-1-RX or

the transmitting unit AcePro-CE88-1-TX.

Pin 1

TMDS Data2+

Pin 11

TMDS Clock Shield

Pin 2

TMDS Data2 Shield

Pin 12

TMDS Clock

Pin 3

TMDS Data2

Pin 13

CEC

Pin 4

TMDS Data1+

Pin 14

Reserved (N.C. on device)

Pin 5

TMDS Data1 Shield

Pin 15

SCL

Pin 6

TMDS Data1

Pin 16

SDA

Pin 7

TMDS Data0+

Pin 17

DDC/CEC Ground

Pin 8

TMDS Data0 Shield

Pin 18

+5V Power

Pin 9

TMDS Data0

Pin 19

Hot Plug Detect

Pin 10

TMDS Clock+

-9-

NOTICE

1. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz

UTP cable and ASTRODESIGN Video Signal Generator VG-859C & VG-870B.

2. Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please

check carefully before plugging in the IR extender to the respective IR sockets. Warranty will not

cover the damage.

3. The transmission length is largely affected by the type of Cat-5/5e/6 cables, the type of HDMI

sources, and the type of HDMI display. The testing result shows solid UTP cables (usually in the

form of 300m [1,000ft] bulk cables) can transmit a lot longer signals than stranded UTP cables

(usually in the form of fixed length patch cords). Shielded STP cables are better suited than

unshielded UTP cables. A solid UTP Cat-5e cable shows longer transmission range than

stranded STP Cat-6 cable. For long extension applications, solid UTP/STP cables are the only

viable choice.

4. EIA/TIA-568-B termination (T568B) for Cat-5/5e/6 cables is recommended for better

performance.

5. To reduce the interference among the unshielded twisted pairs of wires in Cat-5/5e/6 cable, one

can use shielded STP cables to improve EMI problems, which is worsen in long transmission.

6. Because the quality of the CAT5/6 cables has the major effect on how long the transmission limit

can achieve and how good is the received picture quality, the actual transmission range is subject

-5/5e/6 cables. For desired resolutions greater than 1080i or 1280x1024,

a Cat-6 cable is recommended.

7. If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input

#1] generally can produce better transmission performance among all HDMI inputs.

Table des matières

Autres manuels AceProAV Extenseur

AceProAV

AceProAV CE501 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur