ACEFAST MG3 Manuel utilisateur
D3
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –8
Čeština
9 –14
Slovenčina
15 –20
Magyar
21 –26
Deutsch
27 –32
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Functional components
Magnetic suction coil
position
Ring light
USB-C charging port
Screw cap
Air vent mount
Close
Open
Adjust the clip opening and
closing by rotating
Upper and lower support
plate
A clip that goes deep
into the air vent
A ball joint that can
be rotated at will
Not suitable
for circle air
vent
5
Package Contents
Wireless charger x 1
Air vent mount x 1
USB-C cable x 1
User Manual x 1
Specifications
Model
MG3
Input
5V 2A, 9V 2A, 12V 1.5A
Output
5W / 7.5W / 10W / 15W (max)
Weight
129g
Size
65 x 15 mm
Material
ABS+PC, zinc alloy
Accessories
USB-C charging cable x1, air vent clip x1
1. Assemble and tighten the product and the accessories through the ball joint
(compatible with other ball joint accessories with 17mm diameter), fix in the ideal
position. Connect the product with a QC3.0 car charger (optional) and the charging
cable, plug in the cigarette lighter for charging.
2. After the product is powered on, the indicator light will turn on and wait for the phone
to be placed.
When the phone is placed, the magnetic suction force automatically absorbs the phone
and align the coil. The product will start wireless charging, the indicator light is on with
breathing effect. If the phone doesn't support wireless charging or if it detects a metal
foreign object, the light flashes alternately for 5 seconds and then goes off. The
maximum charging power of this product is 15W, the charging efficiency will vary
according to the charging environment and mobile phone.
3. The best distance of wireless charging is within 3-5mm, and it cannot penetrate metal,
so it is necessary to avoid using metal or too thick (over 3mm) mobile phone case, so as
to ensure fast wireless charging of mobile phone.
4. After the phone is removed from the product, the indicator will immediately show the
standby status.
When the car engine off and the power supply stops, the indicator light goes off. The
mobile phone is
still attached to the product by magnetic force and can be taken off at any time.
6
Note:
Adjust the position of the top piece of the air vent and the rotatable clip assembly
according to the position of the air vent blade. Mount to the blade and select the lock
switch position according to the thickness of the blade. Suitable for one-key locking of
the air vent of most cars. Silicone pads for tighter clamp, better fit and to protect the car
from scratches.
Product Care
Keep away from liquids and extreme heat.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
7
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Mobile phone holder
Model / Type: Acefast-D3
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 8.3. 2022
8
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.
9
Vážený zákazníku,
Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě
přečtěte následující pokyny a uschovejte si tento návod k použití pro budoucí použití.
Zvláštní pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli
dotazy nebo připomínky, obraťte se na zákaznickou linku.
✉www.alza.cz/kontakt
✆+420 255 340 111
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
10
Funkční součásti
Poloha magnetické
sací cívky
Světlo kruhu
Nabíjecí port USB-C
Šroubovací uzávěr
Držák do větracího otvoru
Zavřít
Otevřít
Otáčením nastavte otevírání a
zavírání klipu.
Horní a dolní opěrná deska
Klip, který se zasune
hluboko do větracího
otvoru
Kulový kloub, který
lze libovolně otáčet
Nevhodné pro
kruhový
ventilátor
Table des matières
Langues :
Autres manuels ACEFAST Accessoires automobiles
