Accusys ExaSAN A12S2-PS Manuel utilisateur

ExaSAN A12S2-PS

User Guide

Support Host Bus Adapter:

PCIe 2.0: Z1M-G2

Support Host Convertor:

Thunderbolt2.0 to PCIe2.0: C1M-G2

Support Switch System:

PCIe 2.0: SW08-Q4, SW16, SWF16

Accusys Storage Ltd.,

Version: V1.8

Revision Sheet

User Guide Page i

Revision Sheet

Release

No.

Date

Revision Description

V1.0

07/30/2011

Initial release on CD.

V1.1

08/13/2012

Modify some wording and contents

V1.2

09/13/2012

Add a half-high bracket picture in the packing list and

modify the wording on the section 1.3.2

V1.3

12/19/2012

Modify page1-14, item 6 PCIe port expansion.

Modify page 4-3(erase clear log explanation and add

DAS and SAN log file path)

V1.4

02/04/2013

Modify page1-8, add the power convertor to the

packing list and accessory list

Modify page1-12, the LED status of HDD tray when the

HDD is expanded or migrated into an existed array.

Modify page 3-3, the figure for installing HBA onto a

PCIe x 16 slot.

V1.5

02/26/2013

Delete page 1-4, 1-7 5m copper cable

V1.6

01/03/2014

Add safety caution section on last page of the User

Guide

V1.7

09/22/2014

Modify item 3.3.4.2 Installing RAIDGuardX Installationdriver

on Linux and

V1.8

14/10/2014

Add C1M-G2,

Add chapter plan you SAN

Replace ACS-62300 by Z1M-G2

User Guide Page ii

PREFACE

Notice

The product features and specifications described in this guide are subject to change

without notice.

The manufacturer shall not be liable for any damage, or the loss of information resulting

from the performance or use of the information contained herein.

About This Guide

Congratulations on your purchase of the ExaSAN (pronounced X-sa-SAN) A12S2-PS, a

revolutionary high bandwidth streaming rack mounted storage system, specifically

designed for all high-end post production storage. It delivers stability, exceptional

performance, and scalable capacity at a very affordable ownership cost and requires

only a low maintenance budget.

This guide contains instructions for installing and using the ExaSAN A12S2-PS system and

RAID (Redundant Array of Independent Disks) technologies and RAIDGuard X

(ExaSAN’s RAID management software).

If you are new to RAID and RAIDGuard X, this guide will help you become familiar with

these technologies, and assist you in setting up and using RAID on the A12S2-PS. If you

are already familiar with these technologies, use this guide as a reference for

implementing your ExaSAN A12S2-PS RAID solution to achieve maximum performance

and reliability.

For details of hardware installation, setup, configuration and considerations, see

Chapter 1, “Introducing ExaSAN PCIe2.0 Storage System”

Chapter 2, “Preparing to Install ExaSAN A12S2-PS”

Chapter 3, “Installing ExaSAN A12S2-PS”

Chapter 4, “Using RAIDGuard X”

Chapter 5, RAID Overview

Guide to Conventions

Important information that users should be aware of is indicated with the following icons:

Caution

This icon indicates the existence of a potential hazard that could

result in personal injury, damage to your equipment or loss of

data if the safety instruction is not observed.

User Guide Page iii

Note

This icon indicates useful tips on getting the most from your

Accusys RAID system.

Trademarks

Accusys and the names of Accusys products and logos referenced herein are

trademarks and/or service marks or registered trademarks and/or service marks of

Accusys, Inc.

Xsan, Mac, Mac OS, and Macintosh are either registered trademarks or trademarks of

Apple. Other product and company names mentioned herein may be trademarks

and/or service marks of their respective owners.

All contents of this manual are copyrighted by Accusys, Inc.

The information contained herein is the exclusive property of Accusys, Inc. and shall not

be copied, transferred, photocopied, translated on paper, film, electronic media, or

computer-readable form, or otherwise reproduced in any way, without the express

written permission of Accusys Inc.

Document version 1.0

Date Published: November, 2011

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

User Guide Page iv

ExaSAN A12S2-PS User Guide

TABLE OF CONTENTS

Page #

Notice ............................................................................................................................................................ii

About This Guide ........................................................................................................................................ii

Guide to Conventions ...............................................................................................................................ii

Trademarks .................................................................................................................................................iii

1. Introducing ExaSAN PCIe 2.0 Storage System .....................................................................1-1

1.1 System Overview.................................................................................................................1-1

1.1.1 What is the ExaSAN Solution .......................................................................................................1-1

1.1.2 What is the ExaSAN A12S2-PS Solution .....................................................................................1-2

1.1.3 ExaSAN A12S2-PS Components and Accessories.................................................................1-3

1.1.3.1 ExaSAN PCIe RAID Disk System.........................................................................................1-3

1.1.3.2 Hard Disk Drive (HDD) for the RAID System ...................................................................1-3

1.1.3.3 ExaSAN QSFP Host Bus Adapter (Z1M-G2).....................................................................1-3

1.1.3.4 QSFP (Quad Small Form-factor Pluggable) PCIe Copper or Optical Cables .....1-4

1.1.3.5 Power Cord & Power convertors .....................................................................................1-5

1.1.3.6 Rail and Rail Extender .........................................................................................................1-5

1.1.4 Key Features....................................................................................................................................1-5

1.2 Unpacking the System.......................................................................................................1-7

1.2.1 What Is In Your Order ....................................................................................................................1-7

1.2.2 Checking the Equipment You’ll Need.....................................................................................1-7

1.2.3 Unpacking .......................................................................................................................................1-7

1.3 What’s in the Box .................................................................................................................1-8

1.3.1 The ExaSAN RAID ...........................................................................................................................1-8

1.3.2 ExaSAN Accessories ......................................................................................................................1-9

1.3.3 Disk Tray package .........................................................................................................................1-9

1.4 SAS JBOD Expansion...........................................................................................................1-9

1.5 Your A12S2-PS at a Glance ..............................................................................................1-9

1.5.1 ExaSAN A12S2-PS ...........................................................................................................................1-9

1.5.1.1 A12S2-PS Front Panel ...........................................................................................................1-9

1.5.1.2 Beeper Codes .....................................................................................................................1-11

1.5.1.3 Disk Mapping.......................................................................................................................1-12

1.5.1.4 Disk Tray.................................................................................................................................1-12

1.5.1.5 A12S2-PS Rear Panel..........................................................................................................1-13

1.5.1.6 A12S2-PS SAS JBOD Rear Panel ......................................................................................1-15

1.5.1.7 How to Connect Multiple JBOD .....................................................................................1-17

1.5.2 ExaSAN QSFP Host Bus Adapter (HBA)...................................................................................1-18

2. Preparing to Install ExaSAN A12S2-PS ....................................................................................2-1

2.1 Precaution for Handling the System...............................................................................2-1

2.2 Choosing the Location for the System...........................................................................2-1

2.3 Electrical Power ...................................................................................................................2-1

User Guide Page v

2.4 Operating Environment......................................................................................................2-2

2.5 Security...................................................................................................................................2-2

3. Installing the ExaSAN A12S2-PS................................................................................................3-1

3.1 Installing the System ...........................................................................................................3-1

3.1.1 Installing Disk Drives .......................................................................................................................3-1

3.1.2 Installing the HBA Card ................................................................................................................3-2

3.1.3 Connecting the HBA to the A12S2-PS System........................................................................3-4

3.1.4 Installing the rail on A12S2-PS System .......................................................................................3-5

3.2 Powering the System On and Off....................................................................................3-7

3.2.1 Powering On ...................................................................................................................................3-7

3.2.2 Powering Off ...................................................................................................................................3-7

3.3 Install driver and GUI............................................................................................................3-8

3.3.1 Installing ExaSAN driver and GUI RAIDGuardX .............................................................................3-8

3.3.1.1 Installing driver and GUI on MAC and Windows ....................................................................3-8

3.3.1.2 Installing driver and GUI on Linux...........................................................................................3-9

3.3.2 Confirm the ExaSAN RAID system driver on OS............................................................................3-13

3.3.2.1 Confirming the ExaSAN RAID system driver on Mac...........................................................3-13

3.3.2.2 Confirming the ExaSAN RAID system driver in Windows....................................................3-14

3.3.3 Confirm LEDs on HBA....................................................................................................................3-14

3.4 Create Array.........................................................................................................................3-15

3.4.1 Check on new Volume in Disk Utility of MacOS ............................................................................3-15

3.4.2 Check on new volume in Disk Management of Windows................................................................3-15

3.4.3 Check on new volume by fdisk command on Linux.........................................................................3-15

4. Using RAIDGuardX GUI ...............................................................................................................4-1

4.1 RAIDGuardX Overview ......................................................................................................4-1

4.1.1 RAIDGuardX at a Glance ...........................................................................................................4-2

4.1.1.1 Menu Bar ................................................................................................................................4-2

4.1.1.2 RAIDGuard X main console ..............................................................................................4-3

4.1.2 Adding Controller ..........................................................................................................................4-4

(1) DAS –add controller locally...........................................................................................................4-4

(2) SAN –add controller remotely ......................................................................................................4-5

4.1.3 Planning your RAID........................................................................................................................4-5

4.1.4 Creating an Array..........................................................................................................................4-7

4.1.5 Email Notification.........................................................................................................................4-11

4.1.6 Preference.....................................................................................................................................4-12

4.1.6.1 Disk Lag Proof Mode .........................................................................................................4-12

4.1.6.2 NCQ .......................................................................................................................................4-13

4.1.6.3 SMART Mode .......................................................................................................................4-13

4.1.6.4 Beeper...................................................................................................................................4-14

4.1.6.5 Equalization Mode.............................................................................................................4-14

4.1.6.6 Cache ...................................................................................................................................4-15

4.1.6.7 MISC.......................................................................................................................................4-16

4.1.7 Option.............................................................................................................................................4-17

4.1.7.1 Slicing.....................................................................................................................................4-17

4.1.7.2 LUN Map ...............................................................................................................................4-20

4.1.7.3 Expansion .............................................................................................................................4-21

4.1.7.4 Migrations.............................................................................................................................4-23

4.1.7.5 Snapshot...............................................................................................................................4-25

User Guide Page vi

4.1.7.6 Health Center......................................................................................................................4-28

4.1.7.7 Unlock Drives .......................................................................................................................4-29

4.1.8 Updating the ExaSAN RAID system Firmware ......................................................................4-31

4.1.8.1 Preparing the Firmware Update Files............................................................................4-31

4.1.8.2 Installing the Firmware Update Files..............................................................................4-31

5. RAID Overview ..............................................................................................................................5-1

5.1 How RAID Works...................................................................................................................5-1

5.2 Data Storage Methods .......................................................................................................5-1

5.2.1 Data Striping ...................................................................................................................................5-1

5.2.2 Data Mirroring.................................................................................................................................5-1

5.2.3 Data Parity.......................................................................................................................................5-2

5.3 RAID Levels............................................................................................................................5-2

5.3.1 RAID 0: Striping................................................................................................................................5-2

5.3.2 RAID 1: Mirroring .............................................................................................................................5-2

5.3.3 RAID 5: Independent data disks with distributed parity......................................................5-2

5.3.4 RAID 6: Independent data disks with two Independent parity schemes ......................5-2

5.3.5 RAID 0+1: Striped set with Mirroring ..........................................................................................5-3

1. Introduction

User Guide

1. Introducing ExaSAN PCIe 2.0 Storage System

1. Introduction

User Guide Page 1-1

1. Introducing ExaSAN PCIe 2.0 Storage System

1.1 System Overview

Your new ExaSAN (pronounced “X-sa-SAN”) PCIe 2.0 Storage System is a rack mounted

storage that can be used as a DAS (Direct-Attached Storage) or SAN (Storage Area

Network) for the post production and broadcasting industries that require high

bandwidth. Furthermore, the A12S2-PS supports the latest PCIe 2.0 standard providing a

20Gb bandwidth.

1.1.1 What is the ExaSAN Solution

Developed by Accusys, Inc., a worldwide leader in RAID (Redundant Array of

Independent Disks) storage systems, ExaSAN is a system solution built for simple, cost-

effective deployment and storage management. Employing PCIe (PCI Express)

technology, the PCIe 2.0 Storage System uses QSFP cabling technology to natively

transmit at low latency PCI Express Gen 2 protocol. Each channel under PCIe 2.0 can

transmit at 500MB/s, giving PCIe 2.0 x4 storage systems a 20Gb bandwidth and PCIe

2.0x8 a 40 Gb bandwidth. The ExaSAN total solution, including its complete line up of

rack mount system, tower systems, PCIe switch systems and accessories, puts the

benefits of shared, scalable, and high-performance storage within easy reach of

organizations with limited IT resources and budgets.

Post production work such as non-linear editing (NLE) requires especially high

bandwidth storage to support the volume of data being processed, and ExaSAN

storage solution is designed to meet such demands. The high bandwidth enabled by

ExaSAN technology allows the client to achieve the maximum efficiency with minimum

cost, while its enhanced functionality provides continuous and smooth data transfer to

prevent frame drop or lagging of projected content. ExaSAN is a complete solution that

includes the PCIe RAID system, cable and HBA card.

Figure 1 below depicts the ExaSAN A12S2-PS system solution architecture. Note that it

can be expanded from one RAID system to three systems (daisy-chaining from 1x RAID

controller).

1. Introduction

User Guide Page 1-2

Figure 1

Whether it’s collaborative video editing in a post-production workgroup, or a shared

research project in a university, the ExaSAN solution offers a range of performance

levels and storage capacities that scale to meet the needs of small-to-medium-sized

organizations. Equally important is its integrated design, centralized administration and

monitoring, and a suite of built-in management tools; which eliminate the need for a

staff of experts to install and maintain a SAN for the workgroups.

Figure 2 below depicts a standard ExaSAN system solution architecture.

Figure 2

1.1.2 What is the ExaSAN A12S2-PS Solution

The ExaSAN A12S2-PS is a 2U12Bay disk array system designed for all high-end post

production storage usage, with the latest interface technology PCIe 2.0 and innovative

green design, supports RAID level 0, 1, 5, 6, 0+1, high speed 6Gb SAS drives, and high

capacity SATA II drives. The Single port RAID controller of A12S2-PS combined with 12

drives can provide 20Gb bandwidth with its unique Performance Optimization feature.

Your ExaSAN A12S2-PS system consists of the standard components listed below in this

section. Note that items 1 through 5 are Accusys-supplied equipment as part of the

Table des matières

Autres manuels Accusys Serveur de stockage réseau

Accusys

Accusys ExaSAN A12S2-SJ 6Gb SAS JBOD Manuel utilisateur

Manuels Serveur de stockage réseau populaires d'autres marques

HP NetStorage 6000 Manuel utilisateur

Seagate

Seagate U10 ST320423A Manuel utilisateur

Synology

Synology RackStation RS816 Manuel

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manuel utilisateur

Avid Technology

Avid Technology VideoRAID ST Guide de sécurité

Western Digital

Western Digital My Cloud Home Duo Manuel utilisateur

PrimeArray

PrimeArray 4xxx Manuel utilisateur

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manuel utilisateur

Planex

Planex MZK-NAS01SG Manuel utilisateur

Intel

Intel SS4000-E - Entry Storage System NAS Server Manuel utilisateur

Synology

Synology RS2212+ Manuel utilisateur

Allnet

Allnet ALL69000 Manuel utilisateur

Adaptec

Adaptec 5325301580 Manuel utilisateur

Motorola

Motorola EXORdisk II Manuel utilisateur

Sony

Sony XDAAI1PK Manuel utilisateur

Cisco

Cisco Linksys NAS200 Instructions d'utilisation d'origine

Sans Digital

Sans Digital MR4UT6G Manuel utilisateur

AIC

AIC FB128-LX Manuel utilisateur