Accu-Scope 3075 SERIES Manuel utilisateur



MANUAL



73 Mall Drive, Commack, NY 11725 • 631-864-1000 (P) • 631-543-8900 (F)

www.accu-scope.com • [email protected]

3075

STEREO

MICROSCOPE SERIES

3075 STEREO MICROSCOPE



ACCU-SCOPE® 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 2

CONTENTS

SAFETY NOTES ..................................................................................................................3

CARE AND MAINTENANCE................................................................................................3

INTRODUCTION..................................................................................................................4

UNPACKING AND COMPONENTS.....................................................................................4

COMPONENTS DIAGRAM...............................................................................................4-5

OTHER AVAILABLE CONFIGURATIONS/STANDS............................................................6

ASSEMBLY ..........................................................................................................................7

ADJUSMENT AND OPERATION

FOR MICROSCOPES PURCHASED WITH ILLUMINATED STANDS...........................8

ADJUSTING BINOCULAR VIEWING HEAD...................................................................9

FOCUS ADJUSTMENT.................................................................................................10

MOUNTING & REMOVING THE MICROMETER .........................................................11

USING AN AUXILIARY LENS.......................................................................................11

ADJUSTING TRINOCULAR VIEWING HEAD ..............................................................12

OPTICAL DATA..................................................................................................................13

TROUBLESHOOTING........................................................................................................14

MAINTENANCE..................................................................................................................15

SERVICE............................................................................................................................15

WARRANTY.......................................................................................................................15

3075 STEREO MICROSCOPE



ACCU-SCOPE

73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 3

SAFETY NOTES

1. Open the shipping carton carefully to prevent any accessory, i.e. auxiliary objectives or eyepieces,

from dropping and being damaged.

2. Keep the instrument out of direct sunlight, high temperature or humidity, and dusty environments.

3. If any specimen solutions or other liquids splash onto the stage, objective or any other component,

disconnect the power cord immediately and wipe up the spillage. Otherwise, the instrument may be

damaged.

4. LAMP REPLACEMENT -- CAUTION: the glass envelope of the lamp may be extremely

hot. DO NOT attempt to change the lamp before it is completely cooled or without

wearing adequate skin protection.

5. All electrical connectors (power cord) should be inserted into an electrical surge protector to prevent

damage due to voltage fluctuations.

6. FUSE REPLACEMENT -- For safety when replacing the fuse (ONLY replace with the

same size, type and rating of original fuse), be sure the main switch is in the off position,

disconnect the power cord from outlet, and replace the fuse. Reconnect the power cord

and turn unit on.

7. Confirm that the input voltage indicated on your microscope corresponds to your line voltage. The

use of a different input voltage other than indicated will cause severe damage to the microscope.

NOTE: Always plug the stereomicroscope power cord into a suitable grounded electrical outlet. A

grounded 3-wire cord is provided.

CARE AND MAINTENANCE

1. Do not attempt to disassemble any component including the eyepieces, objectives or focusing

assembly.

2. Keep the instrument clean; remove dirt and debris regularly. Accumulated dirt on metal surfaces

should be cleaned with a damp cloth. More persistent dirt should be removed using a mild soap

solution. Do not use organic solvents for cleansing.

3. The outer surface of the optics should be inspected and cleaned periodically using an air stream from

an air bulb. If dirt remains on the optical surface, use a soft, lint free cloth or cotton swab dampened

with a lens cleaning solution (available at camera stores). All optical lenses should be swabbed using

a circular motion. A small amount of absorbent cotton wound on the end of a tapered stick makes a

useful tool for cleaning recessed optical surfaces. Avoid using an excessive amount of solvents as

this may cause problems with optical coatings or cemented optics or the flowing solvent may pick up

grease making cleaning more difficult.

4. Store the instrument in a cool, dry environment. Cover the microscope with the dust cover when not

in use.

5. ACCU-SCOPE

microscopes are precision instruments which require periodic servicing to maintain

proper performance and to compensate for normal wear. A regular schedule of preventative

maintenance by qualified personnel is highly recommended. Your authorized ACCU-SCOPE

distributor can arrange for this service.

3075 STEREO MICROSCOPE



ACCU-SCOPE® 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 4

INTRODUCTION

Congratulations on the purchase of your new ACCU-SCOPE®microscope. ACCU-SCOPE®microscopes

are engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if

used and maintained properly. ACCU-SCOPE®microscopes are carefully assembled, inspected and

tested by our staff of trained technicians in our New York distribution facility. Careful quality control

procedures ensure each microscope is of the highest quality prior to shipment.

UNPACKING AND COMPONENTS

Your microscope arrived packed in a molded shipping carton. Do not discard the carton: the shipping

carton should be retained for reshipment of your microscope if needed. Avoid placing the microscope in

dusty surroundings or in high temperature or humid areas as mold and mildew can form. Carefully

remove the microscope from the shipping carton and place the microscope on a flat, vibration-free

surface.

COMPONENTS DIAGRAM

BinocularHead

Stand

Eyepieces

FocusingKnob

Lock‐screw

StageClips

StagePlate



NOTE: Stand ordered may not be as pictured above.

3075 STEREO MICROSCOPE



ACCU-SCOPE® 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 5

COMPONENTS DIAGRAM (continued)

Lock‐screw



TrinocularHead

C‐mountadapter



LightPath

SelectorLever

3075 STEREO MICROSCOPE



ACCU-SCOPE® 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 6

OTHER AVAILABLE CONFIGURATIONS

    

Binocular on E-LED Stand Binocular on LED Stand Trinocular on Pole Stand

 

Binocular on Boom Stand Binocular on Ball Bearing Boom Stand



BinocularonArticulating(FlexArm)Stand

3075 STEREO MICROSCOPE



ACCU-SCOPE® 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 7

ASSEMBLY

The diagram below shows how to assemble the various modules. The numbers indicate the order of

assembly.

When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching

any parts or touching glass surfaces.

*Camera

C‐mountAdapter

45

Eyepiece

LockScrew

MicroscopeBody

LockScrew3

Stand

StageClip

StagePlate

*Mount the C-mount adapter to camera first, then mount the camera to the microscope

3075 STEREO MICROSCOPE



ACCU-SCOPE® 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 8



ADJUSTMENT

AND OPERATION



For Microscopes Purchased

With Illuminated Stands

VOLTAGE CHECK

Confirm that the input voltage indicated on the

rear label of the microscope corresponds to your

line voltage. The use of a different input voltage

than indicated will cause severe damage to your

microscope.

Connecting the Power Cord (Fig. 1)

Turn the power switch ⑥to the off position (O)

before connecting the power cord ⑦.

Insert the power cord plug ⑦into the power jack

of the microscope; make sure the connection is

snug.

Plug the power cord ⑧into the power supply

receptacle.

Using the Black & White Stage Plate

& Setting the Specimen (Fig. 2)

The White side of the stage plate is generally

used when viewing specimens. If the specimen

is white or bright in color, the Black side of the

stage plate can be used to make the image

appear clearer.

Set the glass stage plate ⑨on the center of the

base, and secure the slide with the two stage

clips ⑩.

Using the Glass Stage Plate

For examination of specimens requiring

transmitted illumination, use the frosted/glass

stage plate.

Fig. 1

Fig. 2

3075 STEREO MICROSCOPE



ACCU-SCOPE® 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 9

ADJUSTMENT

AND OPERATION (continued)

Adjusting Binocular Viewing Head

Adjusting Interpupillary Distance (Fig. 3)

Different users have different interpupillary

distances (this distance is between the centers

of the pupils of each eye). When the operator

changes, it will be necessary to adjust the

interpupillary distance.

While looking through the eyepieces, hold the

left and right eyetubes of the viewing headand

adjust the eyetubes by opening or closing them

until the left and right fields of view coincide

completely and you are able to see a complete

circle.

Adjusting Diopter Ring (Fig. 4)

Set the dioptor ringsof both eyepieces to “0”

position. (Do this when users change, because

different users will have different diopter

settings.)

Place an easy-to-observe specimen on the

stage plate, i.e., a coin.

Rotate the zoom knobto the highest

magnification, then turn the focusing knobto

focus the specimen.

Rotate the zoom knobto the lowest

magnification, looking only into the left eyepiece,

adjust the diopter ring on left eyepiece to focus

the specimen. Then repeat procedure for the

right eyepiece.

NOTE: The working distance (the distance

between the microscope objective to the top of

the specimen) of the microscope is 100mm, the

binocular head focus mountcan be mounted

onto higher or lower positions according to your

needs by removing the clamping bolt with the

Allen wrench provided.

Fig. 3

Fig. 4

3075 STEREO MICROSCOPE



ACCU-SCOPE® 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 10

ADJUSTMENT

AND OPERATION(continued)

Focus Adjustment

Adjusting the Rotation Tension of the

Focus Adjustment Knob (Fig. 5, Fig. 6)

To adjust tension, hold both left and right focus

adjustment knobs①with both hands, hold the

left knob (to prevent it from turning), and rotate

the right knob clockwise to increase (tighten) or

counterclockwise to decrease (loosen) the focus

knob tension.

After tension adjustment has been completed,

always rotate both adjustment knobs in the

same direction.



Changing the Magnification (Fig. 5)

The zooming knobs 3located on both sides of

the zooming body will change the magnification

of the specimen image.



Total Magnification = Magnification of zoom

body x magnification of eyepiece

(i.e., 4.5 x 10=45x)

NOTE: If using any of the optional auxiliary

objectives, then the above magnification would

be multiplied by auxiliary objective magnification.

(i.e., auxiliary 0.5 x 45=22.5x)

Moving the Microscope

Before moving the microscope, be sure to

remove any slide/samples. When moving the

microscope, hold the stand and base to keep it

level.

Fig. 5

Fig. 6

Table des matières

Autres manuels Accu-Scope Microscope

Accu-Scope

Accu-Scope 3061 Zoom Stereo Series Manuel utilisateur

Accu-Scope

Accu-Scope 3025 Series Manuel utilisateur

Accu-Scope

Accu-Scope 3025-LCD Manuel utilisateur

Accu-Scope

Accu-Scope 3078 Series Manuel utilisateur

Accu-Scope

Accu-Scope 3012-LED Manuel utilisateur

Accu-Scope

Accu-Scope 3088F Manuel utilisateur

Accu-Scope

Accu-Scope EXC-120-PL Manuel utilisateur

Accu-Scope

Accu-Scope EXC-500 Manuel utilisateur

Accu-Scope

Accu-Scope EXI-410 Series Manuel utilisateur

Accu-Scope

Accu-Scope 3000-LED-SPH Manuel utilisateur

Accu-Scope

Accu-Scope 3012 Manuel du propriétaire

Accu-Scope

Accu-Scope EXI-310-PH Manuel utilisateur

Accu-Scope

Accu-Scope 3050 Series Manuel utilisateur

Accu-Scope

Accu-Scope EXC-350-PH Manuel utilisateur

Accu-Scope

Accu-Scope EXS-210-24 Manuel utilisateur

Accu-Scope

Accu-Scope 3052-GEM Manuel utilisateur

Accu-Scope

Accu-Scope EXI-310 Series Manuel utilisateur

Accu-Scope

Accu-Scope EXC-350 Series Manuel utilisateur

Accu-Scope

Accu-Scope MT-40 Series Manuel utilisateur

Accu-Scope

Accu-Scope 3078-HDR Manuel utilisateur

Accu-Scope

Accu-Scope 3002 Manuel utilisateur

Accu-Scope

Accu-Scope 3075-GS Manuel utilisateur

Accu-Scope

Accu-Scope Excelis HD Manuel utilisateur

Accu-Scope

Accu-Scope EXC-500 Manuel utilisateur

Manuels Microscope populaires d'autres marques

Thermo Scientific

Thermo Scientific Nicolet iN10 Mode d’emploi

National

National DC3-163 Manuel utilisateur

KERN Optics

KERN Optics OPE-1 Manuel utilisateur

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuel utilisateur

Prior

Prior Lux POL Manuel utilisateur

Opitec

Opitec Smartscoop 115615 Manuel utilisateur

KERN

KERN OPO-1 Manuel utilisateur

Topcon

Topcon SP-1P Manuel utilisateur

Motic

Motic PA43 Manuel utilisateur

Leica

Leica DVM5000 Guide de l'utilisateur

MshOt

MshOt MZ62 Manuel utilisateur

KERN Optics

KERN Optics OZR-5 Manuel utilisateur

VWR

VWR VisiScope 384 Series Manuel utilisateur

Nikon

Nikon ECLIPSE E200 POL Manuel utilisateur

Leica

Leica DI C800 Manuel

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

Olympus

Olympus SZ61 Manuel utilisateur