Acclaim Lighting Linear One DMX Exterior Manuel utilisateur
www.acclaimlighting.com Linear One DMX Exterior
User guide
1
www.acclaimlighting.com
CONTENTS
INTRODUCTION ......................................................2
Welcome 2
Safety 2
Maintenance 2
Cleaning 2
Supplied items 3
Optional accessories 3
INSTALLATION.........................................................5
Mount adjustment 5
Using an optional mounting track 6
Using optional extender bars 7
Removing and refitting the end panels 8
Fitting an optional glare shield 9
Fitting an optional louver 10
Power and control wiring 11
Interconnecting 12
Input wiring protection 13
Tips for achieving successful DMX control 14
Optional wireless control 15
OPERATION ........................................................... 17
Making a temporary control link with the XMT-350 17
Addressing fixtures 18
Setting the cell mode (4’ models only) 19
Setting the signal loss behavior 20
Testing emitter output 21
FURTHER INFORMATION ......................................22
Troubleshooting 22
Specifications 23
Limited product warranty 24
2www.acclaimlighting.com
INTRODUCTION
WELCOME
Welcome to the Linear One DMX Exterior range from Acclaim Lighting. These aluminum
bodied IP66, natatorium-ready fixtures are available in 1’and 4’lengths and are easily
interconnected in series to greatly simplify installation.
The Linear One DMX Exterior range fully embraces Acclaim
Lighting’s Modular Systems (AMS) design standard; AMS allows
a wider choice of interior and exterior options to be configured
in our Los Angeles headquarters and delivered in industry-leading time. In both 1’ and 4’
lengths, there are numerous emitter options, including multiple choices of RGBW, RGBA or
Dynamic White, together with an extensive range of lens options to suit every installation.
Additionally, optional glare shields and louvers allow the light output to be shaped further.
Control is achieved using the industry standard DMX-512A format, with RDM for
configuration. Each Linear One DMX Exterior fixture has a short in-line input cable and a
panel mount output connector (power and control signals are combined via a proprietary
IP67 rated socket). These allow the fixtures to be seamlessly daisy-chained in lengths up to
100 feet (30m) without the need for separate link cables.
With the addition of the optional Acclaim Lighting Aria and UDM•W units (see page 15),
you can add remote wireless connectivity to the long list of abilities within the Linear One
Exterior range.
The internal auto-sensing power supply within each unit can accept mains inputs between
100 to 277VAC at 50 or 60Hz.
SAFETY
•When fixtures are mounted off-ground, ensure they are securely fitted to an appropriate
mounting surface.
•Ensure that the power input is supplied from a correctly fused, earthed and
environmentally protected location.
MAINTENANCE
CAUTION: Always isolate mains power before starting maintenance operations.
•Ensure that all mounting (and device) screws/bolts are fully tight and free of corrosion.
•Ensure there is no deformation to the housing, lenses or fixing points.
•Check that all power supply cables are free from physical damage or material fatigue.
•Use only genuine spare parts supplied by Acclaim Lighting.
CLEANING
•Use a moist, lint-free cloth along with warm water when cleaning each fixture.
•Never use alcohol or solvents.
3
www.acclaimlighting.com
SUPPLIED ITEMS
OPTIONAL ACCESSORIES
Linear One DMX Exterior 1’ or 4’
(two (2) 90° swivel mount brackets included)
Link cables
6” (15cm) [LNLC0]
1’ (30cm) [LNLC1]
5’ (1.5m) [LNLC5]
10’ (3m) [LNLC10]
Louver
1’ (30cm) [LXELV1]
4’ (121cm) [LXELV4]
Glare shield
1’ (30cm) [LXEGS1]
4’ (121cm) [LXEGS4]
Feed cables
10’ (3m) [LNFC10]
50’ (15m) [LNFC50]
Terminator end cap
[LXTEC]
4www.acclaimlighting.com
Extender bars
1’ (30cm) [LNEB1]
2’ (60cm) [LNEB2]
3’ (91cm) [LNEB3]
Mounting track*
1’ (30cm) [LNMT1]
4’ (121cm) [LNMT4]
* not required for all installations
Flat mounting bracket*
[LXFMB]
* factory fitted option
OPTIONAL ACCESSORIES (CONTINUED)
IP66 junction box
[AJBOX1]
5
www.acclaimlighting.com
INSTALLATION
When installing each Linear One fixture, ensure that the surface is level and that nothing is
protruding to damage the mounting bracket(s). Suitable mounting surfaces include steel,
aluminum, concrete or wood structures.
Each Linear One fixture is fitted with two swivel mounting brackets, each of which have
two slots measuring 0.26” x 0.18”(6.5 x 4.5mm), with a base thickness of 0.12” (3mm). Select
bolts or screws (not supplied) that fit the swivel mounting brackets correctly and are
particularly suited to the mounting surface. Optional mounting tracks (see page 6) and
flat mounting brackets (factory fitted option) are also available.
MOUNT ADJUSTMENT
The swivel mounting brackets allow a tilt range of approximately 90 degrees to be achieved.
Use a 0.12” (3mm) Allen wrench to adjust the tilt angle.
Ensure that each swivel mounting bracket is securely fixed to the mounting surface with
appropriate screws/bolts. If necessary, use a 2mm Allen wrench to loosen the two grub
screws on each swivel mounting bracket to allow them to slide along the length of the
fixture to the required position before re-tightening.
Tilt adjustment
(3mm Allen wrench required)
Slide adjustment (x2)
(2mm Allen wrench required)
6www.acclaimlighting.com
USING AN OPTIONAL MOUNTING TRACK
Mounting tracks are aluminum profiles that provide an additional way to secure Linear One
fixtures to surfaces. Once attached to the surface, the mounting track allows the standard
swivel mounting brackets to slide into and be fixed to the track.
Note: The mounting tracks are not symmetrical, one lip is larger than the other in order to
accommodate the shape of the swivel mounts.
TO USE A MOUNTING TRACK
1 Fix the mounting track to your surface using suitable countersunk screws, taking care to
orientate the mounting track correctly, see the note above.
Note: It is important that the countersunk screw heads lie almost flat with the inner surface of
the mounting track, otherwise the swivel brackets of the fixture will not slide over them.
Mounting
track
Note: The‘toe’ of each swivel
mount will only t into the
larger lip of mounting track
2 Slide the swivel brackets of the fixture into the mounting track and secure them at the
required position using small grub screws.
7
www.acclaimlighting.com
2.4" (62mm)
Ø4.33" (110mm)
USING OPTIONAL EXTENDER BARS
A common fixing method is to use optional extender bars. These are available in 1’, 2’and 3’
(30, 60 and 91cm) standoff lengths. Each 1’Linear One fixture requires a single extender bar,
while 4’ fixtures require two.
Note: When feeding cables through the extender bar, check for any irregularities that may have
occurred during the manufacturing process - take care not to snag cables.
Slot in underside can be
used to feed cables to the
rear of the mounting plate
Mounting plate
designed for
attachment to a
standard 4”
electrical box
2 x M4 bolts + washers
required (not supplied
Fixture swivel
mount
8www.acclaimlighting.com
REMOVING AND REFITTING THE END PANELS
Several alterations to the Linear One fixture begin with the removal of the end panels. There
are just four screws holding each end panel in place and these require a medium sized Pozi-
Drive (Philips) screwdriver.
Please note that removing the end panels in no way affects the integrity of the IP66 rating
and there should be no fear of water infiltration in performing this task.
TO REMOVE THE END PANELS
1 Using a medium sized Pozi-Drive (Philips) screwdriver, remove the four screws and store
safely for refitting.
2 Remove the end panel.
3 Repeat for the other end panel.
TO REFIT THE END PANELS
1 Position an end panel onto the fixture, ensuring that the countersinks of the four holes are
facing outwards.
2 Insert the four screws and tighten them using a medium sized Pozi-Drive (Philips)
screwdriver.
3 Repeat for the other end panel.
End panel
Table des matières
Autres manuels Acclaim Lighting Lampe de travail
Manuels Lampe de travail populaires d'autres marques
PowerSmith
PowerSmith PWLD080T Manuel utilisateur
MaxLite
MaxLite 73683 Manuel utilisateur
Heitronic
Heitronic Trend 27867 Manuel utilisateur
Monzana
Monzana Gore MZCL10 Manuel utilisateur
EINHELL
EINHELL TE-CL 18/2000 LiAC Manuel utilisateur
Bayco
Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur