ABB Zenith ZTG T Series Manuel utilisateur

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

Zenith ZTG T-series

For ZTG(D/CT) T-series automatic

transfer switches 1600-3000 A,

208-480 Vac

ZENITH ZTG(D/CT) T-SERIES 1600-3000 A

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

—

Receiving, handling and storage

Receiving and handling

Upon receipt, carefully inspect the trans-

fer switch for damage that may have oc-

curred during transit. If damage is evi-

dent, or there is visible indication of

rough handling, immediately file a dam-

age claim with the transportation com-

pany, and notify your local ABB sales

office.

Do not remove the shipping packaging

until ready to install the switch.

Storage

If the unit will not be placed into service

immediately, store the transfer switch in

its original package in a clean, dry loca-

tion. To prevent condensation, maintain a

uniform temperature. Store the unit in a

heated building, allowing adequate air

circulation and protection from dirt and

moisture. Storing the unit outdoors could

cause harmful condensation inside the

transfer switch enclosure.

HAZARD OF EQUIPMENT

OVERTURNING

When moving with a fork lift, do not

remove the shipping packaging until the

device is in its final location.

Failure to follow this instruction may

result in personal injury or equipment

damage.

Warning

Indicates a hazardous situation that, if not

avoided, could result in death or serious

injury.

ZENITH ZTG(D/CT) T-SERIES 1600-3000 A

—

Read these safety instructions

carefully before using this product!

HAZARD OF ELECTRIC SHOCK,

EXPLOSION, OR ARC FLASH

• Apply appropriate personal protective

equipment and follow safe electrical

work practices.

• This equipment must only be installed

and serviced by qualified electrical per-

sonnel.

• Before performing visual inspections,

tests, or maintenance on the equip-

ment, disconnect all sources of electric

power. Assume that all circuits are live

unless they are completely de-ener-

gized, tested, grounded, and tagged.

Pay particular attention to the design of

the power system. Consider all sources

of power, including the possibility of

backfeeding.

• Disconnect all sources of electric power

before removing or making source side

or load side connections to the transfer

switch.

• Always use a properly rated voltage

sensing device at all line and load con-

nections to confirm transfer switch is

disconnected from all live electrical

sources.

• Turn off power supplying transfer

switch before doing any other work on

or inside switch.

Failure to follow these instructions could

result in death or serious injury.

Danger

Indicates a hazardous situation that,

if not avoided, will result in death or

serious injury.

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

—

Operation, maintenance,

and installation

instruction

Automatic transfer

switches, Zenith

ZTG T-series ATS

INSTALLATION INSTRUCTIONS,

ZENITH ZTG T-SERIES ATS,

CHAPTERS 9–11

OPERATION AND MAINTENANCE

INSTRUCTIONS, ZENITH

ZTG T-SERIES ATS,

CHAPTERS 1–8

ZENITH ZTG(D/CT) T-SERIES 1600-3000 A

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

—

Operation and

maintenance instruction

Automatic transfer

switches, Zenith

ZTG T-series ATS

1. Introduction 11

1.1 Hazard Categories 11

1.2 Definitions 12

1.3 Warranty 13

1.4 Product Specification 14

2. Product overview 15

2.1 General overview 16

2.1.1 Operation types 18

2.2 HMI 19

2.3 LED functionally in HMI 20

2.4 Zenith ZTG (D/CT)T-series features 22

2.5 Typical applications 25

2.6 Sequence of operations 27

2.6.1 Switching sequence / Automatic

(open / delayed transition) 27

2.6.2 Switching sequence / Automatic

(open / delayed transition) 33

2.7 Special features description 37

ZENITH ZTG(D/CT) T-SERIES 1600-3000 A

3. General operation 39

3.1 Position indication 39

3.1.1 Position indication - R5 39

3.2 Operating of automatic Transfer Switch

Equipment 40

3.2.1 Operation of Automatic Transfer

Switch equipment -R5 41

4. Navigating HMI menu 43

4.1 Start Menu 43

4.1.1 Start screens 45

4.1.2 Enter-key, main menu

4.1.3 Esc key 59

5. Electronic accessories 61

5.1 Using Ekip Connect -software 62

5.2 Using Ekip Programming -module 63

5.2.1 LED indications 63

5.3 Auxiliary power supply module 64

5.3.1 Electrical characteristics 64

5.3.2 LED indications 64

5.4 Using Ekip Signalling 2K-_ -module 65

5.4.1 Electrical characteristics of Ekip

Signalling 2K-_ -module 65

5.4.2 Access from the display / Ekip

Signalling 2K-_ -module 65

5.4.3 LED indications and inputs/outputs

of Ekip Signalling 2K-_ -module 69

5.5 Using Ekip Com _ -modules 70

5.5.1 Ekip Com Modbus RTU -module 70

5.5.2 Ekip Com Profibus DP -module 73

5.5.3 Ekip Com DeviceNet -module 76

5.5.4 Ekip Com Modbus TCP -module 80

5.5.5 Ekip Com Profinet -module 84

5.5.6 Ekip Com EtherNet/IP -module 87

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

6. Troubleshooting 91

6.1 Alarms 91

6.2 Warnings 93

6.3 Information 94

7. Technical data 95

7.1 General technical data 95

7.2 Circuit diagrams 98

7.3 Overall dimensions 102

8. Maintenance 103

9. Panel installation 105

9.1 Basic Tools for Installation

and Maintenance 106

9.2 Equipment Inspection and Storage 106

9.3 Lifting and mounting the panel 107

9.4 Mounting the automatic transfer switch 110

9.4.1 Mounting hole dimensions 110

9.4.2 Mounting hole dimensions

(stand-alone ATS, no enclosure) 111

9.4.3 HMI Installation 113

9.5 Wire Connection 114

9.6 Final Equipment Inspection 115

10. Accessories 117

10.1 Auxiliary power supply and Ekip -modules 117

10.2 HMI protective cover 119

11. Replacement parts 119

ZENITH ZTG(D/CT) T-SERIES 1600-3000 A

Autres manuels pour Zenith ZTG T Series

Table des matières

Autres manuels ABB Changer

ABB

ABB 8185.1 Manuel utilisateur

ABB

ABB ATS-16 A Manuel utilisateur

ABB

ABB Zenith ZTG Series Manuel utilisateur

ABB

ABB FAP1021 Series Manuel utilisateur

ABB

ABB SSM/A Manuel utilisateur

ABB

ABB ATS022 Manuel utilisateur

ABB

ABB NE820 Manuel utilisateur

ABB

ABB NE801 Manuel utilisateur

ABB

ABB NAL Series Manuel utilisateur

ABB

ABB DWTL1 Manuel utilisateur

ABB

ABB Tmax Manuel utilisateur

ABB

ABB ESP630 A2 Manuel utilisateur

ABB

ABB Zenith ZBTS T Series Guide de l'utilisateur

ABB

ABB FIP2002 Manuel utilisateur

ABB

ABB OWIII Manuel utilisateur

ABB

ABB FIP1011 Manuel utilisateur

ABB

ABB C571-AC Manuel utilisateur

ABB

ABB UniGear Series Manuel utilisateur

ABB

ABB ATS021 Manuel utilisateur

ABB

ABB OTA125 Manuel utilisateur

ABB

ABB vital 1 Manuel utilisateur

ABB

ABB i-bus KNX 6108/02-500 Manuel de la liste des pièces

ABB

ABB SIM600 Manuel utilisateur

ABB

ABB 3299A-A12100 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur