ABB ACS880 Series Manuel utilisateur

—

ABB INDUSTRIAL DRIVES

ACS880 liquid-cooled multidrive cabinets

Mechanical installation instructions

ACS880 liquid-cooled multidrive

cabinets

Mechanical installation instructions

Table of contents

1. Mechanical installation

EFFECTIVE: 2019-06-30

Table of contents

1 Mechanical installation

7Contents of this chapter ..........................................................................

7Examining the installation site ..................................................................

7Necessary tools ...................................................................................

8Checking the delivery ............................................................................

9Moving and unpacking the drive ................................................................

9Moving the drive in its packaging ...........................................................

9Lifting the crate with a forklift .............................................................

10Lifting the crate with a crane .............................................................

11Moving the crate with a forklift ...........................................................

11Removing the transport package ...........................................................

12Moving the unpacked drive cabinet .........................................................

12Lifting the cabinet with a crane ..........................................................

13Moving the cabinet on rollers ............................................................

13Moving the cabinet on its back ...........................................................

14Final placement of the cabinet ...........................................................

15Fastening the cabinet to the floor and wall or roof ...........................................

15General rules ...................................................................................

16Fastening the cabinet (non-marine units) ..................................................

16Alternative 1 – Clamping ..................................................................

17Alternative 2 – Using the holes inside the cabinet ....................................

18Fastening the cabinet (marine units) .......................................................

19Joining cabinet sections together ...............................................................

22Miscellaneous .....................................................................................

22Cable duct in the floor below the cabinet ..................................................

22Arc welding .....................................................................................

Further information

Table of contents 5

Mechanical installation

Contents of this chapter

This chapter describes the mechanical installation procedure of the drive.

Examining the installation site

Examine the installation site:

• The installation site is sufficiently ventilated or cooled to remove heat from the drive.

See the technical data.

• The ambient conditions of the drive meet the specifications. See the technical data.

• There is enough free space above the drive to enable cooling, maintenance, and

operation of the pressure relief (if present).

• The floor that the drive cabinet is installed on is of non-flammable material, as smooth

as possible, and strong enough to support the weight of the unit. Check the floor flatness

with a spirit level. The maximum allowed deviation from the surface level is 5 mm in

every 3 meters. Level the installation site, if necessary, as the cabinet is not equipped

with adjustable feet.

Necessary tools

The tools required for moving the unit to its final position, fastening it to the floor and wall

and tightening the connections are listed below:

• crane, fork-lift or pallet truck (check load capacity!), slate/spud bar, jack and rollers

• Pozidriv and Torx screwdrivers

• torque wrench

• set of wrenches or sockets.

Mechanical installation 7

Checking the delivery

The drive delivery contains:

• drive cabinet line-up

• optional modules (if ordered) installed onto the control unit(s) at the factory

• appropriate drive and optional module manuals

• delivery documents.

Check that there are no signs of damage. Before attempting installation and operation,

check the information on the type designation labels of the drive to verify that the delivery

is of the correct type.

8 Mechanical installation

Moving and unpacking the drive

Move the drive in its original packaging to the installation site as shown below to avoid

damaging the cabinet surfaces and door devices. When you are using a pallet truck, check

its load capacity before you move the drive.

The drive cabinet is to be moved in the upright position.

The center of gravity of the cabinet is high. Be therefore careful when moving the unit. Avoid

tilting.

￭Moving the drive in its packaging

Lifting the crate with a forklift



Mechanical installation 9

Lifting the crate with a crane

max 20

Lifting pointa

Optimal position for the lifting sling: as close to the traverse board

as possible

10 Mechanical installation

Autres manuels pour ACS880 Series

Table des matières

Autres manuels ABB Entraînement CC

ABB

ABB ACS1000 Manuel utilisateur

ABB

ABB ACS 800 Series Manuel utilisateur

ABB

ABB ACS480-04-09A8-1 Manuel utilisateur

ABB

ABB ACS580-0P Manuel utilisateur

ABB

ABB ACS880-17LC Manuel utilisateur

ABB

ABB FBVi-2U4-4T Manuel utilisateur

ABB

ABB ACH580-01 Series Manuel utilisateur

ABB

ABB ACH580-31 Manuel utilisateur

ABB

ABB NOCH0070-6 Series Manuel utilisateur

ABB

ABB ACS880-01+C135 Series Manuel du propriétaire

ABB

ABB ACS880-37 Manuel utilisateur

ABB

ABB ACS580MV Manuel utilisateur

ABB

ABB ACS880-01 Series Manuel du propriétaire

ABB

ABB Q952 Manuel utilisateur

ABB

ABB ACQ80-04 Series Manuel utilisateur

ABB

ABB ACS880 Series Manuel d'utilisation et d'entretien

ABB

ABB ACS355 series Manuel utilisateur

ABB

ABB ACH550 series Manuel utilisateur

ABB

ABB ACSM1-04 Series Manuel utilisateur

ABB

ABB ACS 600 Instructions d'utilisation et d'entretien

ABB

ABB ACS380 Series Manuel d'utilisation et d'entretien

ABB

ABB ACS850-04 series Manuel utilisateur

ABB

ABB ACS510-01 Manuel utilisateur

ABB

ABB Relion 615 series Manuel utilisateur

Manuels Entraînement CC populaires d'autres marques

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuel utilisateur

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuel de la liste des pièces

Chamberlain Garog

Chamberlain Garog D Series Manuel utilisateur

Parker

Parker PDS Series Manuel utilisateur

Festo

Festo DGC G Series Guide de configuration

Binks

Binks QS-5012-1-CE Manuel utilisateur

Danfoss

Danfoss VLT 2800 Series Fiche technique

YASKAWA

YASKAWA CANopen SI-S3 Manuel utilisateur

GE D20A6 Manuel utilisateur

Unex

Unex MC-D-250-1000-050W-TW Manuel utilisateur

Geckodrive

Geckodrive G213V Manuel utilisateur

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuel du propriétaire

WEG

WEG DeviceNet CFW500 Manuel utilisateur

Siemens

Siemens SINAMICS G Fiche technique

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Mode d'emploi

SOMFY

SOMFY JR RU 30 Manuel utilisateur

Beckhoff

Beckhoff AX8911 Manuel de l'opérateur

Minarik

Minarik MM300 Series Manuel utilisateur