Aastra BE-100HT Manuel utilisateur

- 1 -

MODEL BE

MODEL BEMODEL BE

MODEL BE-

-100HT

100HT100HT

100HT

HEADSET TELEPHONE

HEADSET TELEPHONEHEADSET TELEPHONE

HEADSET TELEPHONE

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

OWNER’S MANUAL

PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY.

- 2 -

- 3 -

Introduction -------------------------------------------------------------------4

Features and Controls-----------------------------------------------------5

Installation---------------------------------------------------------------------7

Installing your Headset Telephone -----------------------------------7

Operation ----------------------------------------------------------------------8

Using the Headset --------------------------------------------------------8

Making Outgoing Calls---------------------------------------------------9

Answering Incoming Calls ----------------------------------------------9

Adjusting the Ringer Volume ----------------------------------------- 10

Using the Tone/Pulse Switch----------------------------------------- 10

Using the Redial Button ----------------------------------------------- 10

Using the Flash Button------------------------------------------------- 11

Using the Hold Button-------------------------------------------------- 11

Care and Maintenance--------------------------------------------------- 12

FCC Information ----------------------------------------------------------- 13

Important Safety Information------------------------------------------ 14

TABLE OF CONTENTS

- 4 -

Thank you for purchasing the Model BE-100HT Headset

Telephone. The BE-100HT is a full featured compact telephone,

designed to provide hands-free operation using a comfortable

lightweight headset. You will experience a greater level of comfort

and convenience with the BE-100HT Headset Telephone than

when using a standard telephone handset for communications

and at the same time keep your hands free to perform other

functions.

Features include:

•Adjustable microphone boom.

•HOLD button.

•Last number REDIAL button.

•FLASH button.

•TONE/PULSE dial switch.

•In-Use LED indicator.

•Ringer Hl/LOW switch.

•Slide volume control.

•Detachable belt clip.

•Nine foot long modular headset cord.

•Seven foot long modular telephone cord.

INTRODUCTION

- 5 -

FEATURES AND CONTROLS

1. TELEPHONE LINE JACK Connects incoming telephone line plug from

telephone wall jack.

2. RINGER Hl/LOW SWITCH The HI/LOW switch adjusts the sound level of the

ringer.

3. TONE/PULSE SWITCH Selects either TONE or PULSE dialing.

4. IN-USE LED The IN-USE LED indicates when phone is off hook.

5. DIALING KEY PAD The dialing keys are used to dial outgoing calls.

6. VOLUME CONTROL Adjusts incoming voice sound level.

7. TALK BUTTON Push the TALK button to get dial tone for outgoing

calls, to answer incoming calls, or to hang up.

8. REDIAL BUTTON Press the REDIAL button to dial the last phone

9. FLASH BUTTON Press the FLASH button to answer a call waiting,

or to obtain dial tone when setting up a conference

call.

10. HOLD BUTTON Press the HOLD button to place a call on hold.

11. HEADSET JACK Insert the plug from headset cord into this jack.

12. BOOM MIC Adjustable boom positions microphone for comfort

and voice clarity.

13. HEAD BAND Adjustable head band for comfort.

14. EAR SPEAKER Adjustable for right or left handed use.

15. HEADSET CORD Plugs into jack (11) on BE-100HT Telephone.

Figure 1

1234

8 9 10

- 6 -

An optional belt clip is supplied with your BE-100HT headset

telephone. It can be easily installed or removed as required. See

Figure 2

1. Insert the belt clip mounting tabs into the corresponding

mounting holes located on the rear surface of the BE-100HT.

2. Confirm the belt clip mounting tabs are aligned correctly.

3. Press the belt clip towards the right side of the BE-100HT to

lock the belt clip in place.

FEATURES AND CONTROLS - continued

Figure 2

BELT CLIP

TE LE P H O N E

- 7 -

INSTALLING YOUR HEADSET TELEPHONE

The BE-100HT is a complete telephone and can be used in the

same manner as any single line telephone. See Figure 3

1. Insert the plug from the headset cord into the modular jack

marked HEADSET on the left side of the BE-100HT.

2. Plug one end of the supplied telephone line cord into the

modular jack marked LINE on the top side of the BE-100HT.

3. Plug the remaining end of the modular telephone line cord into

any existing RJ-11C modular wall jack.

IMPORTANT: AFTER INSTALLING YOUR BE-100HT

TELEPHONE, IT IS NECESSARY TO WAIT 10 SECONDS FOR

IT TO INITIALIZE PRIOR TO USING IT FOR THE FIRST TIME.

INSTALLATION

Figure 3 RJ-11C

- 8 -

USING THE HEADSET

The BE-100HT is supplied with a high quality microphone to

provide clear voice communications. The boom microphone can

be swiveled to position so the headset can be used on either ear.

See Figure 4

OPERATION

1. Place the headband over

your head with the speaker

on the ear of your

preference.

2. With one hand grasp and

hold the ear cushion.

Carefully pull the boom

microphone down and into

position so that the

microphone is in front or

slightly to the side of your

mouth.

3. The boom that holds the

microphone is flexible. It

can be bent to position the

boom microphone so that it

is approximately 1 inch

from your mouth.

4. Do not twist the

microphone on the end of

the boom as this may

damage the internal wiring.

5. For your safety, use the

clothing clip to secure the

cord to your lapel or collar.

Figure 4

Cushioned

Speaker

Clothing Clip

Modular Plug

Microphone

Stablizer

T-Bar

- 9 -

6. Always leave enough slack in the cord so that you can move

your head freely.

MAKING OUTGOING CALLS

1. Put on the headset and adjust it for your comfort.

2. Adjust boom microphone so that it is about the width of two

fingers from your mouth.

3. Push the TALK button (7), you will hear a dial tone in your

headset speaker and the IN USE LED will light.

4. Adjust the VOLUME control to set the dial tone volume to a

comfortable sound level.

5. Using the dial pad of your BE-100HT, dial the number you want

to call. You will hear the numbers dialing in your headset

speaker.

6. When called party answers, talk normally.

7. After completing your conversation, push the TALK button (7)

to hang up and disconnect the call. The IN USE LED will go

out.

ANSWERING INCOMING CALLS

1. Put on the BE-100HT headset on your head and adjust it for

your comfort.

2. Adjust boom microphone so that it is about the width of two

fingers from your mouth.

OPERATION - continued

- 10 -

3. When you hear an incoming call ringing, push the BE-100HT

TALK button (7). The BE-100HT telephone will answer the call

and the IN USE LED will light.

4. Begin speaking normally into the microphone.

5. After completing your conversation, push the TALK button (7)

to hang up and disconnect the call. The IN USE LED will go

out.

ADJUSTING THE RINGER VOLUME

The volume of the telephone ringer can be adjusted by moving the

ringer switch (2) on the back of the BE-100HT either to the right

LOW or left HI.

TONE/PULSE SWITCH

The BE-100HT can dial outgoing calls using either TONE (DTMF)

or PULSE dialing. In most cases dialing in TONE mode is easier

and faster.

5. Set the TONE/PULSE switch (3) on the back of the BE-100HT

to choose the appropriate method of dialing.

2. If your telephone service only supports pulse dialing, you must

have this switch in the PULSE position.

REDIAL BUTTON

The REDIAL button (8) is used to quickly redial the last number

that was dialed using the dial pad.

OPERATION - continued

Table des matières

Autres manuels Aastra Téléphone

Aastra

Aastra OpenPhone 61 Manuel utilisateur

Aastra

Aastra 6751i RP Manuel utilisateur

Aastra

Aastra M740E Manuel utilisateur

Aastra

Aastra 312 RELEASE NOTES Manuel utilisateur

Aastra

Aastra DIALOG 4223 PROFESSIONAL Manuel utilisateur

Aastra

Aastra 9120 Manuel utilisateur

Aastra

Aastra MERIDIAN M5316 Manuel utilisateur

Aastra

Aastra 6751i CT Manuel utilisateur

Aastra

Aastra Featurephone M6310 Manuel utilisateur

Aastra

Aastra Venture IP Telephone System Manuel utilisateur

Aastra

Aastra Meridian 9216 Manuel utilisateur

Aastra

Aastra M320 Manuel utilisateur

Aastra

Aastra 8314 Manuel utilisateur

Aastra

Aastra 6869i Manuel utilisateur

Aastra

Aastra 8004 Manuel utilisateur

Aastra

Aastra M310 Manuel utilisateur

Aastra

Aastra 6751i RP Manuel de service

Aastra

Aastra 6730I Guide de configuration

Aastra

Aastra POWERTOUCH 390 Manuel utilisateur

Aastra

Aastra OpenPhone 71 Manuel utilisateur

Aastra

Aastra 6755i Manuel utilisateur

Aastra

Aastra ITE-760 Manuel utilisateur

Aastra

Aastra Clearspan 6731i Manuel utilisateur

Aastra

Aastra ITE-12SD Manuel de l'opérateur

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur