Aaeon AOP-8150 Manuel utilisateur
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual Rev.A 2nd Ed -1-
AOP-8150
Intel®ULV Celeron®650MHz Processor
Fanless Operator Panel
with 15” TFT LCD
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual V1.0 - 2 -
Copyright Notice
This document is copyrighted, 2005. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products
described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any in-
fringements upon the rights of third parties, which may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy, AAEON,
assumes no liabilities resulting from errors or omissions in this document,
or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual Rev.A 2nd Ed -3-
Acknowledgments
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIATechnologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their respective
owners.
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual V1.0 - 4 -
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 AOP-8150 series Fanless Operator Panel PC
• 10 Mounting Bracket & Screws
• 1 Power cord (optional)
• 1 Transfer board for CD-ROM (optional)
• 1 CD-ROM for manual (in PDF format) and drivers
If any of these items are missing or damaged, contact your distributor or
sales representative immediately.
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual Rev.A 2nd Ed -5-
1. Use a 3 V @ 200 mA lithium battery
2. Packing: please carry the unit with both hands, handle
with care
3. Maintenance: to properly maintain and clean the
surfaces, use only approved products or clean with a
dry applicator
4. Do not remove CompactFlash storage card while
reading from or writing into the storage card.
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual V1.0 - 6 -
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For plug-in equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping
it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over voltage.
12. Never pour any liquid into an opening. This may cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, the equipment
should be opened only by qualified service personnel.
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual Rev.A 2nd Ed -7-
14. If one of the following situations arises, get the equipment checked
by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY DAMAGE
THE EQUIPMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED.REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE RECOMMENDED BY THE
MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO
THE MANUFACTURER'S INSTRUCTIONS.
DISCLAIMER: This set of instructions is given according to IEC 704-1.
AAEON disclaims all responsibility for the accuracy of any statements
contained herein.
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual V1.0 - 8 -
Contents
Copyright Notice...........................................................2
Acknowledgments ........................................................3
Packing List..................................................................4
Safety & Warranty ........................................................6
Chapter 1 General Information............................................9
Introduction.................................................................10
Features.....................................................................11
Specification ...............................................................12
Dimension ..................................................................17
Chapter 2 Hardware Installation........................................18
CD-ROM Installation...................................................19
2.5" Hard Disk Drive Installation.................................23
PCI extension kit Installation.......................................28
Panelmount Installation..............................................33
Digital I/O 8 bit Connector (CN9)................................35
COM2 RS-232/422/485 Selection (JP4 & JP5)..........36
Chapter 3 BIOS Installation...............................................37
System Test and Initialization .....................................38
Award BIOS Setup .....................................................39
Chapter 4 Driver Installation..............................................42
Installation ..................................................................44
FAQ ............................................................................46
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual Rev.A 2nd Ed -9-
General
Information
Chapter
1
Fanless Operator Panel AOP-8150
AOP-8150 Series User Manual V1.0 - 10 -
Introduction
The AOP-8150 panel PC is a Ultra Low Voltage Low power Celeron
processor computer that is designed to serve as a human machine
interface (HMI) and as a multimedia computer. It is a PC-based system
with 15" color TFT LCD display, on-board Ethernet controller, multi-COM
port interfaces and an audio controller. In addition, its "fit anywhere"
design makes it very flexible and able to be used in many different kinds
of installations. It can be wall mounted, panel mounted or stood upright
on a desktop.
For system integrators, this simple, complete, compact and highly
integrated multimedia system let you easily build a panel PC into your
applications. Common industrial applications include factory automation
systems, precision machinery, and production process control. It is also
suitable for many non-industrial applications, including interactive kiosk
systems, entertainment management, and car park automation. Our
panel PC is a reliable, cost-effective solution to your application's
processing requirements.
Table des matières
Autres manuels Aaeon Écran tactile
Aaeon
Aaeon ACP-5182 Manuel utilisateur
Aaeon
Aaeon AOP-8060 Manuel utilisateur
Aaeon
Aaeon AHP-1123 Manuel utilisateur
Aaeon
Aaeon OMNI-3155-UP Manuel utilisateur
Aaeon
Aaeon OMNI-5215-SKU Manuel utilisateur
Aaeon
Aaeon ACP-5215 Manuel utilisateur
Aaeon
Aaeon ACP-1074 Manuel utilisateur
Aaeon
Aaeon ACD-110D Manuel utilisateur
Aaeon
Aaeon ACP-1103 Manuel utilisateur
Aaeon
Aaeon FOX-122 Manuel utilisateur
Aaeon
Aaeon APC - 8152 Manuel utilisateur
Aaeon
Aaeon AFP-6123 Manuel utilisateur
Aaeon
Aaeon AHP-1122 Manuel utilisateur
Aaeon
Aaeon ACD-515R Manuel utilisateur
Aaeon
Aaeon AHP-1083 Manuel utilisateur
Aaeon
Aaeon AGP-3125 Manuel utilisateur
Aaeon
Aaeon Onyx-151 Manuel utilisateur
Aaeon
Aaeon FOX-150 Manuel utilisateur
Aaeon
Aaeon AMB-2003 Series Manuel utilisateur
Aaeon
Aaeon OMNI-2155 Manuel utilisateur
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
