3R system 3R-SSA300 Manuel utilisateur
Portable Stand Scanner
3R-SSA300
Manual
－1 －
－Index ―
1. Contents 2
2. Name of each parts 2
3. Installation of Anyty Mini Scan 3
4. Use Anyty Mini Scan（Setup and launch）8
5. Use Anyty Mini Scan（Capture tab, Image scan）9
6. Use Anyty Mini Scan（Preview scanned image and Editing）12
7. Use Anyty Mini Scan（Other function）14
8. Q&A 15
9. Caution 15
10. Spec 16
※The brand names except us which is mentioned in this book, the service names
are registered trademarks of the product companies
－2 －
1 Contents
Thank you for buying our stand scanner! The package
contains contents below
●3R-SSA300
●Installation CD
●Manual（This book）
2 Name of each part
Name of each part of 3R-SSA300 is noted below.
（Attention）The USB cable of this product could not be
removed so please DO NOT pull it.
Sensor
Power lamp（inner）
USB cable
－ －
‘ ’
‘ ’
（ ）
‘ ’
（ ）
①
（ ）
（ ）
－4 －
②Auto play will be launched. Please click ‘Open folder
to view files’
③Please click ‘install’to start installation
（Attention）UAC might be activated if you use Windows
7/Vista. Please press ‘Allow’or ‘continue’to start
installation
－5 －
④Install program will be launched. Please click ‘Next’.
⑤You need to select where to install first. Normally,
press ‘Next’ and continue.
－6 －
⑥Click ‘Next’in next screen to start installation
⑦The Window below will be shown as installation is
complete. Please click ‘Close’to finish install program
－7 －
⑧As installation is complete, please connect Anyty Mini
to your PC with USB port. That is all about set up.
（Attention ）If the device could not be identified
properly, please see ‘Q&A’on page 15.
－8 －
4 Use Anyty Mini Scan（Preparation and launch）
①After completion of installing ‘Anyty Mini Scan’, please
place 3R-SSA300 on somewhere flat and stable. Then put the
object you want to scan as below.
（Attention）Please adjust the position of document after
launch Anyty Mini Scan
②Please launch the software by double click icon on
desktop or launching from ‘program’in ‘Start’
Double click icon on the desktop
Click ‘Anyty Mini Scan’in the group of ‘Anyty Mini Scan’.
Scan Document
－9 －
5Use Anyty Mini Scan(Scan preview, Image scan）
①The window of which is shown below will be shown when
the Anyty Mini Scan is launched. The image through
sensor will be shown at left side of the window and
capture button. At the right hand side, the capture data
and folders will be shown,
The image under the scanner（Scan preview）
Scan button and Video property Captured data Folders
Table des matières
