3Com Baseline 2250 Plus Mode d’emploi

Autres manuels pour Baseline 2250 Plus

2

Table des matières

Autres manuels 3Com Changer

3Com

3Com IntelliJack NJ2000 Manuel utilisateur

3Com

3Com SUPERSTACK 3 4500 Manuel utilisateur

3Com

3Com 7750 Series Manuel utilisateur

3Com

3Com OfficeConnect 3C1670800 Manuel utilisateur

3Com

3Com CoreBuilder 9000 Guide d'application

3Com

3Com 4007 Manuel d'utilisation

3Com

3Com 3CR17561-91-US - Switch 4500 26PORT Managed 24 10/100 2 Gbe Stackable... Manuel utilisateur

3Com

3Com 4200G 12-Port Manuel utilisateur

3Com

3Com 2928 - Baseline Plus Switch PWR Manuel utilisateur

3Com

3Com IntelliJack NJ105 Manuel utilisateur

3Com

3Com CoreBuilder 5000 Manuel utilisateur

3Com

3Com Switch 7700 Manuel utilisateur

3Com

3Com SuperStack 3 3C16468 Manuel utilisateur

3Com

3Com CoreBuilder 2500 Manuel utilisateur

3Com

3Com SuperStack II Switch 1100 Manuel utilisateur

3Com

3Com OfficeConnect 3C16733A Manuel utilisateur

3Com

3Com 3300 XM Manuel utilisateur

3Com

3Com 3CRS48G-24-91 Manuel utilisateur

3Com

3Com 5500-EI PWR Manuel utilisateur

3Com

3Com 4007 Manuel utilisateur

3Com

3Com Switch 4500 Family Manuel utilisateur

3Com

3Com Baseline 2816 Manuel utilisateur

3Com

3Com 4200G Series Manuel utilisateur

3Com

3Com E4500-24 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

3Com Baseline Switch 2250 Plus

Release Notes

Software version 1.0.0.7

Part Number: 10015459 Rev. AB

Published Date: January 2007

1. Introduction

1.1 Scope

These release notes summarize the operational requirements and known issues for the

following 3Com Baseline Switch 2250 Plus /software releases.

Software Release Filenames Description

1.0.0.7 Initial Release Operational Software

3Com Baseline Switch 2250 Plus

Model # 3C16476CS

Note: The software does not operate with any other

3Com Switch.

1.2 Online Resources

To obtain a copy of the 3Com Baseline Switch 2250 Plus User Guide, visit the 3Com

Web site: www.3Com.com where you can find the most up-to-date version.

To obtain the latest technical information for your Switch, including a list of known

problems and solutions, visit the 3Com Knowledgebase:

http://knowledgebase.3com.com

To obtain current software updates (maintenance releases) and associated release

notes for the 3Com Baseline Switch 2250 Plus and other 3Com products, visit the 3Com

Web site: http://www.3Com.com

3Com Baseline Switch 2250 Plus v1.0.0.7 Release Notes

Page 2 of 2

2. Known Issues for 3Com Baseline Switch 2250 Plus

Release v1.0.0.7

2.1 Image Download

•If you download an incorrect image for Web upgrade, the Switch does not display an

error message and continues to function normally.

2.2 Limited SNMP Support

•The Switch has limited SNMP support in this release.

3. Upgrading Software

To upgrade the software in the 3Com Baseline Switch 2250 Plus, perform the following

procedure:

1. Obtain (i.e., download) the appropriate upgrade file for your device.

The upgrade file available from the 3Com web site is provided in an EXE format.

Please run the executable to reveal the upgrade file.

2. Access the web administration interface by pointing your web browser at the IP

address for the switch.

3. Log in to the user interface. Default: Type “admin” in the username field and press

Return. (The default admin password is to leave the password field blank.)

4. Select the “Administration” tab on the menu on the left side of the page and choose

the Firmware Upgrade tab.

5. Click the “Browse” button, which will open a screen for you to select a filename to

load into the Switch. Select “Open”.

6. Click the “OK” button.

7. Follow the instructions in the popups for the remainder of the upgrade.