3
• The following table shows the necessary wire gauge for twin bell
wire over the expected length between camera and TV Monitor.
Notes :
1. For cameras with operation current up to 1 mA and transient peak current up to
15 mA, also a PS-1 KU power stabilizer is normally required.
2. For camera power over 18W and/or covering extended distances, local power supply
for camera is required and dummy loading 15 R/3W is required for `DC out` in
PF15 A12D
Video Input : 1Vp-p 75-ohm
Power Supply : 48VDC .Max
Operating temperature : -1 °C ~ + 5 °C
Dimensions : 35mm x 58mm x 86mm
Suitable for any Camera with following specification:
Each Camera Rating : 12VDC, 15 mA. Max.
Each Camera Video output : 1Vp-p 75-ohm
≤
500mA ≤
≤≤
≤680mA ≤
≤≤
≤1000mA
PF150A12D PF150A12D
PF150A12D
AWG20
