ZyXEL Communications NWD-490 Manuel utilisateur

ZyXEL NWD-490

802.11 b/g Wireless SDIO Adapter

User’s Manual

Version 1.0

January 2007

ZyXEL NWD-490 User Manual

Important Note

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

ZyXEL NWD-490 User Manual

1. Introduction

Take advantage of the Wi-Fi connection when you on the go. The NWD-490 SDIO

802.11g wireless client adapter provides high-speed wireless connection to your PDA

or Smart phone. If your pocket PC does not have the built-in Wi-Fi function, or the

built-in 802.11b wireless module keeps you waiting when you need to get e-mail

attachment, then the NWD-490 with 54 Mbps data rate is the solution for you.

1.1 Minimum System Requirements

•PDA or Smart phone equipped with SDIO slot.

•The supported OS are PC 2003, Mobile 4.2/5.0

1.2 Installation Overview

1. Install SDIO driver via Active Sync® to the PDA or Smart Phone.

2. Insert the NWD-490 SDIO Wireless Adapter.

3. Select ZyXEL SDIO Wireless Adapter as Network adapter in PDA.

4. Configure wireless security settings if needed.

2. Software Installation

)Do not insert ZyXEL NWD-490 into the SDIO slot of your PDA until

the Driver installation has been performed.

1. Connect your PDA to your computer and make sure Active-Sync® has

established a connection between the two devices.

2. Insert the support CD into the CD-ROM drive on your computer.

ZyXEL NWD-490 User Manual

3. Click Setup to install the NWD-

490 driver. If this screen does not

display, locate and double-click

autorun.exe on the support CD.

4. When complete the driver installation, the screen of ZyXEL 802.11g SDIO

Wireless Adapter.CAB was successfully installed on your device

displays.

3. Getting Started

The installation screen shots are based on Mobile 5.0 unless otherwise specified. To

ensure ZyXEL NWD-490 works well in your PDA or Smart phone, we recommend

you process the following steps for setting.

1. Insert the ZyXEL SDIO Card into the SD slot of

your PDA. The LED turns on and blinks if the

NWD-490 is installed properly.

ZyXEL NWD-490 User Manual

2. Tab on Start menu -> Settings.

3. Tap on the Connections tab.

ZyXEL NWD-490 User Manual

4. Tap on Set up my proxy server on the

Connection page.

5. On the Proxy Settings page, make sure the

checkbox of This network connects to the

Internet is checked, the checkbox of This

network uses a proxy server to connect to

the Internet should not be checked and the

Proxy server box should remain blank.

Tap on ok.

ZyXEL NWD-490 User Manual

)If your device has built-in 802.11b wireless, in order to improve

wireless performance, you may disable the existing IEEE 802.11b

signal.

6. Return to Settings page -> Connections tab

-> tap on the built-in wireless connection (In

this case, it is iPAQ Wireless).

7. Turn off the IEEE 802.11b function and tap ok.

* In this example, tap on Wi-Fi icon on the

iPAQ Wireless page. When a red dot with a

white x appears, the built-in IEEE 802.11b has

been turned off.

ZyXEL NWD-490 User Manual

8. On Settings page -> Connections tab -> tap

on the Network Cards icon.

9. Tab on Network Adapters tab, and select the

ZyXEL SDIO Wireless Adapter.

ZyXEL NWD-490 User Manual

10. If you are connecting to a network that has a

DHCP server, select Use server-assigned IP

address to have the DHCP server assign

TCP/IP information (such as IP address and

Subnet mask) to your NWD-490, otherwise,

select Use specific IP address and fill in the

IP address, Subnet mask and Default

gateway. Then tap on ok.

4. Configuring WLAN Utility

To connect to a wireless network, you must set the client device (PDA) with the SSID

as the Access Point (AP) or Router you want to connect to. You also need to

configure the security settings if the AP or Router already has one.

The NWD-490 supports WEP, WPA-PSK and WPA2-PSK for wireless network

security.

1. Tap on Start -> Settings page -> Connections tab -> Network Cards icon.

ZyXEL NWD-490 User Manual

2. Select the SSID you want to connect to from

the list of wireless networks found.

3. If wireless security was enabled in the network

you selected, enter the appropriate Network

key (case-sensitive) to match the AP or

Router. Then tap on ok.

*Unless you know your router is designed for

and set up for IEEE 802.1x network access,

you should leave the box unchecked on

802.1x page.

Table des matières

Autres manuels ZyXEL Communications Adaptateur

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-220F Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA5215 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-202 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-407 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD-210N - V1.0 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyAIR G-200 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-402 v3 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD-271N - Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Omni TA128 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYAIR G-110 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-220 V2 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyAIR G-220 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications WPA-1000 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyAIR G-200 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD-211AN - Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA5215 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Wireless LAN USB Adapter ZyAIR 200 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD3105 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-400 Mode d’emploi

ZyXEL Communications

ZyXEL Communications PLA4211 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD2205 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications 802.11g Wireless USB Adapter ZyXEL G-200 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur