ZUUM Media MAHCL4X4 Manuel utilisateur

HDBaseT HDMI 4x4 Matrix Switcher with

Full 3D Support

User Manual

MAHCL4X4

Here for You 24/7!

1-888-861-7351

Our MAHCL4X4 has been tested for conformance to today’s safety regulations and requirements and

has been certified for international use. Please be careful though because just like any other electronic

device;the MAHCL4X4 should be used with care. Please read and follow the safety instructions to

protect yourself from possible injury and to reduce the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit

●Do not attempt to service this unit yourself, except where explained in this manual

●Provide proper ventilation and air circulation and do not use near water

●Keep objects at a safe distance away from your device and make sure the placement of this unit is on

a stable surface

●Use only the power adapter,power cords and connection cables designed for this unit

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug power from the device before

cleaning

TABLE OF CONTENTS

INTRODUCTION................................................................................................. 1

FEATURES.......................................................................................................... 1

PACKAGE CONTENTS........................................................................................ 1

SPECIFICATIONS............................................................................................... 2

HARDWARE INSTALLATION.............................................................................. 3

CONNECTION DIAGRAM.................................................................................... 4

PANEL DESCRIPTIONS...................................................................................... 5

CONTROL & OPERATION................................................................................... 6

HDBASET RECEIVERS...................................................................................... 16

FAQ.................................................................................................................... 17

WARRANTY....................................................................................................... 18

SAFETY'AND'NOTICE'

The ZuumMedia MAHCL4X4 provides the most reliable and cost effective solution in the market to

switch high definition video plus multi-channel (up to 7.1-channel) digital audio from any of the four HDMI

sources to the remote displays at the same time. Simple and easy setup with auto signal equalization and

amplification (no dipswitches or dials to adjust) ensuresthe best possible picture quality and sound

transmission. This is a perfect solution to use in home theaters, conference or presentation rooms, schools,

commercial and retail environments or wherever you need HDTV distribution.

•HDBaseT HDMI 4 by 4 matrix switcher

•Dual output: local HDMI or RJ45/HDBaseT

•Optional HDBaseT receivers extend HDMI, IR, RS-232 over CAT5/6 cable up to 328ft (100m)

•Uncompressed high resolution video up to 1080p@60Hz or 1920X1200

•Deep color (36bit) and 3D

•Max data rate up to 6.75Gbps

•HDMI and HDCP compliant

•View any HDMI source on one or more displays at the same time

•Supports LPCM, Dolby AC3, TrueHD, DTS-HD

•EDID management, default, learn and auto EDID from displays

•Local control using the front panel buttons, IR remote control and RS-232

•Bi-directional IR and RS-232 control from the display side

•Front panel LCD display and status LEDs

•Fast response time, 2 to 5 seconds per channel switch

•Firmware upgradeable

•Easy installation, includes ears for rack-mounting and wall-mounting

•MAHCL4X4

•IR Receiver

•IR Blaster

•12VDC 4.16Amp Power Supply

•IR Remote Control

•Rack-Mounting ear set

•User Manual

INTRODUCTION'

FEATURES'

PACKAGE'CONTENTS'

Model:

MAHCL4X4

Technical

Product Type

True 4x4 HDBaseT matrix

HDMI Compliance

HDMI Deep Color & full 3D

HDCP Compliance

Yes

Video Bandwidth

Single-link 225MHz (6.75Gbps)

Video Support

480i / 480p / 720p / 1080i / 1080p@60 36bit deep color

Audio Support

Surround sound (up to 7.1ch) or stereo digital audio

ESD Protection

1 - Human body model —±19kV (air-gap discharge) & ±12kV (contact discharge)

2 -Core chipset —±8kV

HDBaseT Max. Distance

328ft (100m)

Video Input

4x HDMI

Video Output

4x HDMI / 4x RJ45 HDBaseT

HDMI Input Selection

Push-in button / IR remote control / RS-232 control

IR Remote Control

Carrier frequency: 30-60kHz / Angle ±45°

HDMI Connector

Type A (19-pin female)

IR Input Connector

(3.5mm) Receives IR commands from remote control

IR Output Connector

(3.5mm) Sends IR commands to source components

RS-232 In/Out Connector

DE-9 (9-pin D-sub female) x 5

Mechanical

Enclosure

Metal case

Mounting

1U rack-mounting ears and wall hanging holes

Power Supply

12VDC 4.16A

Power Consumption

2.6A (Max)

Temperature

Operation: 32 to 104°F, Storage: -4 to 140°F, Humidity: up to 95%

Dimensions - inches

17.25"(w) x 1.73"(h) x 7.76"(d)

Weight -lbs

5.29

Model:

HE1LBIR232-HRX (MAHCL4X4 optional CAT5/6 receiver)

Resolution

Up to 1080p/60Hz/48bit, 3D, 4Kx2K

Distance

328ft (100m) Max

HDMI Connector

Type A (19-pin female)

RS-232 Baud Rate

Up to 115200 bps / Full Duplex

RS-232 Connector

DE-9 (9-pin D-sub male) x 1

IR Carrier Frequency

30-60kHz/±55°/16.4ft (5m)/2Way

Power Supply

Regulated 5VDC/2A Included

Power Consumption

1200mA (Max)

Temperature

Operation: 32 to 131°F, Storage: -4 to 185°F

Humidity

Up to 95%

Dimensions

5.19”(w) x 3.46”(h) x 1.18”(d)

Weight -lbs

.62

SPECIFICATIONS'

Model:

HE1L-HRX (MAHCL4X4 optional CAT5/6

receiver)

HE1LBIR-70M-HRX (MAHCL4X4 optional

CAT5/6 receiver)

Resolution

Up to 1080p/60Hz/48bit, 3D, 4Kx2K

Distance

328ft (100m) Max

CAT5 196ft (60m), CAT6 229ft (70m)Max

HDMI

Connector

Type A [19-pin female]

Type A (19-pin female)

IR Carrier

Frequency

N/A

30-60kHz/±55°/16.4ft (5m)/2Way

Power Supply

Regulated 5VDC/2A Included

Two Regulated 5VDC/2A Included

Power

Consumption

1200mA (Max)

380mA (Max)

Temperature

Operation: 32 to 131°F, Storage: -4 to

185°F

Operation: 32 to 131°F, Storage: -4 to 185°F

Humidity

Up to 95%

Dimensions

1.94”(w) x 3.62”(h) x .98”(d)

1.93”(w) x 3.62”(h) x .98”(d)

Weight -lbs

.30

Before installation, please make sure all devices you are connecting are turned off.

1. Connect all sources to the HDMI inputs of matrix.

2. Connect all displays to the HDMI outputs of matrix.

3. If using one or more optional HDBaseT extenders, connect them to the RJ45 output ports of matrix

using recommended high quality CAT5/6 UTP/STP cable (CAT6 recommended).

4. Maximum transmission distance is up to 328ft (100m) depending on which HDBaseT extender that is

connected to matrix.

5. After all cables and equipment are connected to matrix, plug-in 12VDC 4.16A power supply.

6. Turn on all equipment, test matrix functions from front control buttons or IR remote.

HARDWARE'INSTALLATION'

CONNECTION'DIAGRAM'

Front Panel

1. Power Button: Turn matrix On/Off, Blue LED(Power On), Red LED (Standby), LED Off (Power Off)

2. LCD Display: Display for navigating menu

3. Front Button Control: Front panel push buttons used to navigate through setup menu and select output

to input ports

4. Front LED Status: LED display for input/output connection status

Back Panel

5. Input 1-4: HDMI Inputs

6. Remote RS-232: RS-232 Remote Control Ports

7. System IR Control:External IR Receiver and External IR Emitter Connections

8. Output 1-4: HDMI and HDBaseT RJ45 Outputs

9. Console RS-232: RS-232 Local Control Port

10. 12VDC: 12VDC Power Jack

11. Panel Switch: Master Power On/Off Switch

PANEL'DESCRIPTIONS'

Method A: Push-in Buttons

1. Front Panel Button Control

POWER Power On/Standby

UP Cursor Up

DOWN Cursor Down

LEFT Cursor Left

RIGHT Cursor Right

ENTER Select and Confirm

MENU Back to Main Menu

*When the sub-menu setting is changed, press the ENTER button to confirm the setting. If ENTER is not

selected the change will not be stored.

2. LCD Display

Main MENU Option List:

SWITCH SETTING

RS232 SETTING

IR TX SETTING

IR RX SETTING

HDBASET IR ID

MATRIX IR ID

EDID

FIRMWARE VER.

KEYLOCK

* When the power on the main screen appears, press the MENU button to enter the setup menu.

CONTROL'&'OPERATION '

Operation:

•Press the UP or Down button to move (*) within the main page, select one of the options in the main

list and press the ENTER button to enter sub-page.

•When the selected sub-page setting is complete, press the MENU button to return to the main page.

SWITCH SETTING: (Default: 1 2 3 4)

This option is used to switch the input/output port, enter the SWITCH SETTING menu. Press the ENTER key,

the LCM bottom line INPUT 1 will start to flash, press the UP or DOWN button to select the input port, press

the LEFT or RIGHT button to select the output to modify, then press ENTER to confirm setting.

At the HDBaseT receiver extender side, use the IR1 remote control to do a quick input selection. Press 1~4

button to select HDMI input or press POWER or 0 to turn video output off.

RS-232 SETTING: (Default: FIX MODE)

HDBaseT extender with built-in RS-232 port can be used in two modes, enter the RS-232 SETTING part of

the menu, press ENTER, the * will flash, press UP or DOWN button to select FIX MODE or MATRIX MODE,

then press ENTER key to confirm setting.

* FIX MODE is one to one transmission, RS-232 port 1 only works with a receiver connected to HDBaseT

port 1, RS-232 port 2 only works with a receiver connected to HDBaseT port 2, and so on…

* MATRIX MODE allows the selection of any RS-232 port 1~4 to work with any of the HDBaseT ports 1~4, In

this example the R-232 port 1 is transmitting to multiple receivers that are connected to HDBaseT port 1, 2, 3

and the RS-232 port 4 is transmitting to HDBaseT port 4 only.

IR TX SETTING: (Default IR TX: O O O O)

This option is used to setup whether the IR signal will be sent from the MATRIX IR to the receiver connected

to HDBaseT port 1~4. To control a remote device, setting should be O for on and X is for off.

After entering the IR TX SETTING menu, press ENTER, the bottom line of text will start to flash, press the UP

or DOWN button to select O or X, then press ENTER to confirm setting.

Table des matières

Autres manuels ZUUM Media Commutateur matriciel

ZUUM Media

ZUUM Media MAH8X8 Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

Kramer

Kramer XL 3216VS Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

Kramer

Kramer VP-2x2 Manuel utilisateur

Kramer

Kramer Sierra Video 6432V5xl Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Kramer

Kramer LASSEN XL 3232S Manuel utilisateur

Roland

Roland XS-1HD Manuel utilisateur

Kramer

Kramer VS-66HDCPxl Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes