Zte Blade V40 Smart Manuel utilisateur

ZTE 9045

(ZTE Blade V40)

Quick Start Guide

FCC ID:SRQ-ZTE9045

LEGAL INFORMATION

No part of this publication may be quoted, reproduced,

translated or used in any form or by any means,

electronic or mechanical, including photocopying and

microfilm, without the prior written permission of ZTE

Corporation.

Notice

ZTE Corporation reserves the right to make

modifications on print errors or update specifications in

this guide without prior notice.

We offer self-service for our smart terminal device users.

Please visit the ZTE official website (at

www.ztedevices.mx) for more information on user

manual, self-service and supported product models.

Information on the website takes precedence.

Disclaimer

ZTE Corporation expressly disclaims any liability for

faults and damages caused by unauthorized

modifications of the software.

Images and screenshots used in this guide may differ

from the actual product. Content in this guide may differ

from the actual product or software.

Trademarks

ZTE and the ZTE logos are trademarks of ZTE

Corporation.

Android™ is a trademark of Google LLC.

The

Bluetooth

® word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by ZTE Corporation is under license.

microSDXC Logo is a trademark of SD-3C, LLC.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing Limited.

DTS, the Symbol, & DTS and the Symbol together, DTS:X,

the DTS:X logo, and DTS:X Ultra are registered

trademarks or trademarks of DTS, Inc. in the United

States and/or other countries. © DTS, Inc. All Rights

Reserved.

Other trademarks and trade names are those of their

respective owners.

Getting to Know Your Phone

Front camera

Touch screen

Earpiece

Volume key

Power key/

Fingerprint

sensor

Charging/USB

Type-C jack

Headset jack

Back cameras

and flash

Speaker

nano-SIM/

microSDXC

card tray

Proximity &

light sensor

Your phone supports 2.4 GHz and 5 GHz Wi-Fi.

Setting Up Your Phone

The nano-SIM card can be installed or removed while

the phone is turned on.

WARNING!

To avoid damage to the phone, do not use any other

kind of SIM cards, or any non-standard nano-SIM card

cut from a SIM card. You can get a standard nano-SIM

card from your service provider.

1. Insert the tip of the tray eject tool into the hole on

the card tray.

NOTE:

Please use the tray eject tool included in the box.

Otherwise the card tray may not be ejected.

CAUTION:

Never replace the included tray eject tool with sharp

objects. Ensure that the tray eject tool is perpendicular

to the hole. Otherwise, the phone may be damaged.

2. Pull out the card tray and place the nano-SIM card

and the microSDXC card (optional) on the tray, as

shown. Carefully slide the tray back into place.

Charging the Phone

Your phone’s battery should have enough power for the

phone to turn on, find a signal, and make a few calls. You

should fully charge the battery as soon as possible.

WARNING!

Use only ZTE-approved chargers and USB Type-C cables.

The use of unapproved accessories could damage your

phone or cause the battery to explode.

WARNING!

Do not remove the back cover. The battery is not

removable. Removal may cause fire or explosion.

1. Connect the adapter to the charging jack.

2. Connect the charger to a standard AC power outlet.

nano-SIM

card

microSDXC

card

3. Disconnect the charger when the battery is fully

charged.

NOTE:

If the battery is extremely low, you may be unable to

power on the phone even when it is being charged. In

this case, try again after charging the phone for at least

20 minutes. Contact the customer service if you still

cannot power on the phone after prolonged charging.

Powering On/Off Your Phone

Make sure the battery is charged before powering on.

Press and hold the Power key to turn on your

phone.

To power off, press and hold the Power key to open

the options menu, and touch >.

NOTE:

If the screen freezes or takes too long to respond, try

pressing and holding the Power key for over 10 seconds

to restart the phone.

FM Radio

Scanning for Channels

1. Plug in a wired headset and open FM Radio.

2. Touch > Scan > OK. Your phone scans for all

available channels and saves them to the channel

list.

Listening to FM Radio

1. Open FM Radio while the headset is connected.

2. Touch > All channels and select a channel.

You can also drag the red needle along the frequency

panel or touch or to switch to other channels, or

touch or to adjust the current channel frequency.

NOTES:

Touch to add the channel to favorites.

Touch to listen to the radio through the phone

speaker.

The FM radio feature does not require an Internet

connection.

Product Safety Information

Don’t make or receive phone calls while

driving. Never text while driving.

Keep your phone at least 10 mm away from

your body while making calls.

Small parts may cause choking.

Your phone can produce a loud sound.

To prevent possible hearing damage, do not

listen at high volume levels for long periods.

Exercise caution when holding your phone

near your ear while the loudspeaker is in use.

Avoid contact with anything magnetic.

Keep away from pacemakers and other

electronic medical devices.

Turn off when asked to in hospitals and

medical facilities.

Turn off when told to on aircraft and at

airports.

Turn off when near explosive materials or

liquids.

Don’t use at gas stations.

Your phone may produce a bright or flashing

light.

Don’t dispose of your phone in fire.

Avoid extreme temperatures.

Avoid contact with liquids. Keep your phone

dry.

Do not attempt to disassemble your phone.

Only use approved accessories.

For pluggable equipment, the socket-outlet

shall be installed near the equipment and shall

be easily accessible.

Don’t rely on your phone as a primary device

for emergency communications.

FCC RF Exposure Information (SAR)

This phone is designed and manufactured not to exceed

the emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications Commission

of the United States.

During SAR testing, this device was set to transmit at its

highest certified power level in all tested frequency

bands, and placed in positions that simulate RF exposure

in usage against the head with no separation, and near

the body with the separation of 10 mm. Although the

SAR is determined at the highest certified power level,

the actual SAR level of the device while operating can be

well below the maximum value. This is because the

phone is designed to operate at multiple power levels so

as to use only the power required to reach the network.

In general, the closer you are to a wireless base station

antenna, the lower the power output.

The exposure standard for wireless devices employing a

unit of measurement is known as the Specific

Absorption Rate, or SAR. The SAR limit set by the FCC is

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Zte Téléphone portable

Manuels Téléphone portable populaires d'autres marques

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur

LG Thrive Manuel utilisateur